Contents
2022
Volume: 37 Issue 8
12 Article(s)

Export citation format
RESEARCH ARTICLE
Two-dimensional g-C3N4 Compositing with Ag-TiO2 as Deactivation Resistant Photocatalyst for Degradation of Gaseous Acetaldehyde
Hongyun XUE, Congyu WANG, Asad MAHMOOD, Jiajun YU, Yan WANG, Xiaofeng XIE, and Jing SUN
The photocatalysts deactivation is one of the major issues, which lowers the usefulness of photocatalytic oxidation technology for the removal of low content volatile organic compounds (VOCs). Here, we carried out a series of experiments to demonstrate that the photocatalysts stability could be significantly improved v
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 865 (2022)
RhO2 Modified BiVO4 Thin Film Photoanodes: Preparation and Photoelectrocatalytic Water Splitting Performance
Yue HU, Lin AN, Xin HAN, Chengyi HOU, Hongzhi WANG, Yaogang LI, and Qinghong ZHANG
Bismuth vanadate is one of the most promising photoanodes for photoelectrocatalytic water splitting, however, its photoelectrocatalytic efficiency is still not ideal due to its sluggish kinetic reaction rate. The RhO2 cocatalyst was loaded on the BiVO4 thin film photoanode by impregnation method, and the photoelectroch
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 873 (2022)
Cu3(HHTP)2 Film-based Ionic-liquid Electrochromic Electrode
Xiaoyu ZHANG, Yongsheng LIU, Ran LI, Yaogang LI, Qinghong ZHANG, Chengyi HOU, Kerui LI, and Hongzhi WANG
Room temperature ionic liquid shows wide electrochemical windows and good environmental stability, which is expected as an ideal electrolyte for electrochromic devices. However, the small crystal spacing of traditional electrochromic materials limits the diffusion of large ions in ionic liquid. Repeated deintercalation
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 883 (2022)
Achieving High Light Uniformity Laser-driven White Lighting Source by Introducing Secondary Phases in Phosphor Converters
Taoli DENG, Hexin CHEN, Lingli HEI, Shuxing LI, and Rongjun XIE
Laser-driven white lighting sources have great potential for applications with super-high brightness, high directionality and long distance illumination, but are usually limited by their poor uniformity due to mismatch between blue laser light and phosphor converted light. In this work, a secondary phase of TiO2, BN, A
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 891 (2022)
Preparation and Properties of BaTiO3 Ceramics by Low Temperature Cold Sintering
Tingting WEI, Huarui XU, Guisheng ZHU, Shenfeng LONG, Xiuyun ZHANG, Yunyun ZHAO, Xupeng JIANG, Jinjie SONG, Ningjie GUO, and Yipeng GONG
Preparation of ceramics by cold sintering process has attracted great attention, and some progress has been made in the preparation of BaTiO3 ceramics. In order to improve the performance of cold sintered BaTiO3 ceramics, BaTiO3 powder with good dispersion, particle size of 100 nm and tetragonality (crystal parameter c
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 903 (2022)
Fabrication and Characterizations of Red Ce-doped 8YSZ Transparent Ceramics by Two-step Sintering
Qiang LIU, Qian WANG, Penghui CHEN, Xiaoying LI, Lixuan ZHANG, Tengfei XIE, and Jiang LI
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 911 (2022)
Multi-scale Failure Behavior of Cathode in Lithium-ion Batteries Based on Stress Field
Ying CHEN, Weiling LUAN, Haofeng CHEN, and Xuanchen ZHU
Lithium-ion batteries are widely used as energy storage and dynamic power, while the capacity life of battery is one of the key factors affecting its further application. The electrochemical-mechanical multi-field coupling effect of the lithium-ion batteries during the cyclic charging and discharging process cause the
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 918 (2022)
REVIEW
Progress of Spontaneous Coagulation Casting of Ceramic Slurries Based on Hydrophobic Interaction
Shiwei WANG
Spontaneous coagulation casting (SCC) is a novel in-situ ceramic forming method, not only universal for various ceramics but also working well at room temperature in air. Here presents the finding of SCC, involving an anion dispersant which acts as both dispersing and coagulating agent. Then, the difference between SCC
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 809 (2022)
Research Progress of SiC Fiber Reinforced SiC Composites for Nuclear Application
Qin OUYANG, Yanfei WANG, Jian XU, Yinsheng LI, Xueliang PEI, Gaoming MO, Mian LI, Peng LI, Xiaobing ZHOU, Fangfang GE, Chonghong ZHANG, Liu HE, Lei YANG, Zhengren HUANG, Zhifang CHAI, Wenlong ZHAN, and Qing HUANG
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 821 (2022)
Preparation of Special Ceramics by Microwave Heating: a Review
Yongqiang CHEN, Yixue WANG, Fan ZHANG, Hongxia LI, Binbin DONG, Zhiyu MIN, and Rui ZHANG
Special ceramics are widely used in aerospace, electronics, information, new energy, machinery, chemical industry, and other emerging industries. Their high temperature preparation process is still dominated by traditional gas kilns and electric heating furnaces with high carbon emissions and high energy consumption. T
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 841 (2022)
Progress of Porous Silicon Nitride Ceramics Prepared via Self-propagating High Temperature Synthesis
Ye ZHANG, and Yuping ZENG
Porous silicon nitride (Si3N4) ceramics can be widely used in various fields, such as sound and shock absorption, filtration and so on, due to its high porosity and outstanding properties of ceramics. However, conventional preparation methods, such as gas-pressure/pressureless sintering, sintering reaction-bonded sinte
Journal of Inorganic Materials
  • Publication Date: Aug. 20, 2022
  • Vol. 37, Issue 8, 853 (2022)