[1] Naftaly M, Molloy J F, Magnusson B, Andreev Y M and Lanskii G V 2016 Silicon carbide—a high-transparency nonlinear material for THz applications Opt. Express 24 2590–5

[2] Nakamura D, Gunjishima I, Yamaguchi S, Ito T, Okamoto A, Kondo H, Onda S and Takatori K 2004 Ultrahigh-quality silicon carbide single crystals Nature 430 1009–12

[3] Lee S P, Shin Y S, Bae D S, Min B H, Park J S and Kohyama A 2006 Fabrication of liquid phase sintered SiC materials and their characterization Fusion Eng. Des. 81 963–7

[4] Kitahara H, Noda Y, Yoshida F, Nakashima H, Shinohara N and Abe H 2001 Mechanical behavior of single crystalline and polycrystalline silicon carbides evaluated by Vickers indentation J. Ceram. Soc. Japan 109 602–6

[5] Zhang Z Y, Yan J W and Kuriyagawa T 2011 Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide Int. J. Adv. Manuf. Technol. 57 117–25

[6] Bude J et al 2014 High fluence laser damage precursors and their mitigation in fused silica Opt. Express 22 5839–51

[7] Gao F and Weber W J 2004 Mechanical properties and elastic constants due to damage accumulation and amorphization in SiC Phys. Rev. B 69 224108

[8] Dessemond L and Kleitz M 1992 Effects of mechanical damage on the electrical properties of zirconia ceramics J. Eur. Ceram. Soc. 9 35–9

[9] Neslen C L, Mitchel W C and Hengehold R L 2001 Effects of process parameter variations on the removal rate in chemical mechanical polishing of 4H-SiC J. Electron. Mater. 30 1271–5

[10] Hu Y, Shi D, Hu Y, Zhao H W and Sun X D 2018 Investigation on the material removal and surface generation of a single crystal SiC wafer by ultrasonic chemical mechanical polishing combined with ultrasonic lapping Materials 11 2022

[11] Song X L, Li Y K, Jiang N, Qu Y X and Qiu G Z 2008 Recent development of chemical mechanical polishing Chem. Ind. Eng. Prog. 27 26–31

[12] Speed D et al 2015 Physical, chemical, and in vitro toxicological characterization of nanoparticles in chemical mechanical planarization suspensions used in the semiconductor industry: towards environmental health and safety assessments Environ. Sci. Nano 2 227–44

[13] Yin J F, Bai Q and Zhang B 2018 Methods for detection of subsurface damage: a review Chin. J. Mech. Eng. 31 41

[14] Lee Y 2011 Evaluating subsurface damage in optical glasses J. Eur. Opt. Soc. 6 11001

[15] Suratwala T, Wong L, Miller P, Feit M D, Menapace J, Steele R, Davis P and Walmer D 2006 Sub-surface mechanical damage distributions during grinding of fused silica J. Non-Cryst. Solids 352 5601–17

[16] Neauport J, Ambard C, Cormont P, Darbois N, Destribats J, Luitot C and Rondeau O 2009 Subsurface damage measurement of ground fused silica parts by HF etching techniques Opt. Express 17 20448–56

[17] Lakhdari F, Bouzid D, Belkhir N and Herold V 2017 Surface and subsurface damage in Zerodur? glass ceramic during ultrasonic assisted grinding Int. J. Adv. Manuf. Technol. 90 1993–2000

[18] Zhuang D and Edgar J H 2005 Wet etching of GaN, AlN, and SiC: a review Mater. Sci. Eng. R 48 1–46

[19] Chen S S, Li S Y, Peng X Q, Hu H and Tie G P 2015 Research of polishing process to control the iron contamination on the magnetorheological finished KDP crystal surface Appl. Opt. 54 1478–84

[20] Cheng H B, Feng Z J, Wang Y W and Lei S T 2005 Magnetorheological finishing of SiC aspheric mirrors Mater. Manuf. Process. 20 917–31

[21] Lambropoulos J C, Salzman S, Smith T R, Xu J, Pomerantz M, Shanmugam P, Davies M A, Taylor L L and Qiao J 2017 Subsurface Damage (SSD) Assessment in Ground Silicon Carbide (SiC) (9–13 July 2017) (Denver: Colorado Optical Fabrication and Testing 2017) p OM3B.5

[22] Cardinaud C, Peignon M-C and Tessier P-Y 2000 Plasma etching: principles, mechanisms, application to micro- and nano-technologies Appl. Surf. Sci. 164 72–83

[23] B′ardos L and Bar′ankov′a H 2008 Plasma processes at atmospheric and low pressures Vacuum 83 522–7

[24] Fanara C, Shore P, Nicholls J R, Lyford N, Kelley J, Carr J and Sommer P 2006 A new reactive atom plasma technology (RAPT) for precision machining: the etching of ULE? surfaces Adv. Eng. Mater. 8 933–9

[25] Jin H L, Xin Q, Li N, Jin J, Wang B and Yao Y X 2013 The morphology and chemistry evolution of fused silica surface after Ar/CF4 atmospheric pressure plasma processing Appl. Surf. Sci. 286 405–11

[26] Dai Z C, Chen S Y, Xie X H and Zhou L 2019 Investigation of grinding and lapping surface damage evolution of fused silica by inductively coupled plasma etching Int. J. Precis. Eng. Manuf. 20 1311–23

[27] Novak M and Sharma D 2013 3D optical microscopes: a basic technology comparison for metrology applications: learn more about 3D techniques such as white light interferometry and confocal microscopy (BNP Media) 52 30–3 (https://www.proquest.com/scholarlyjournals/ 3-d-optical-microscopes-basic-technology/ docview/1348254625/se-2?accountid=162699)

[28] Zhang Y, Li R L, Zhang Y J, Liu D Z and Deng H 2019 Indiscriminate revelation of dislocations in single crystal SiC by inductively coupled plasma etching J. Eur. Ceram. Soc. 39 2831–8

[29] Sun R Y, Yang X, Watanabe K, Miyazaki S, Fukano T, Kitada M, Arima K, Kawai K and Yamamura K 2019 Etching characteristics of quartz crystal wafers using argon-based atmospheric pressure CF4 plasma stabilized by ethanol addition Nanomanuf. Metrol. 2 168–76

[30] Yih P H, Saxena V and Steckl A J 1997 A review of SiC reactive ion etching in fluorinated plasmas Phys. Status Solidi b 202 605–42

[31] Omori N, Matsuo H, Watanabe S and Puschmann M 1996 Influence of carbon monoxide gas on silicon dioxide dry etching Surf. Sci. 352–354 988–92

[32] Wang R X, Zhang C, Liu X, Xie Q, Yan P and Shao T 2015 Microsecond pulse driven Ar/CF4 plasma jet for polymethylmethacrylate surface modification at atmospheric pressure Appl. Surf. Sci. 328 509–15

[33] Jung T Y, Kim D H and Lim H B 2006 Molecular emission of CF4 gas in low-pressure inductively coupled plasma Bull. Korean Chem. Soc. 27 373–5

[34] Zimmermann S, Ahner N, Blaschta F, Schaller M, Rülke H, Schulz S E and Gessner T 2010 Analysis of the impact of different additives during etch processes of dense and porous low-k with OES and QMS Microelectron. Eng. 87 337–42

[35] Zhou R W, Zhang X H, Zong Z C, Li J X, Yang Z B, Liu D P and Yang S Z 2015 Reactive oxygen species in plasma against E. coli cells survival rate Chin. Phys. B 24 085201

[36] Milella A, Palumbo F, Favia P, Cicala G and d’Agostino R 2004 Continuous and modulated deposition of fluorocarbon films from c-C4F8 plasmas Plasma Process. Polym. 1 164–70

[37] Li H N, Yang Y, Zhao Y J, Zhang Z L, Zhu W Q, Wang W L and Qi H 2019 On the periodicity of fixed-abrasive planetary lapping based on a generic model J. Manuf. Process. 44 271–87

[38] Johnson W A, North J C and Wolfe R 1973 Differential etching of ion-implanted garnet J. Appl. Phys. 44 4753–7

[39] Menapace J A, Davis P J, Steele W A, Wong L L, Suratwala T I and Miller P E 2006 MRF applications: measurement of process-dependent subsurface damage in optical materials using the MRF wedge technique Proc. SPIE 5991, Laser-Induced Damage in Optical Materials: 2005 (Boulder, CO: SPIE) p 599103

[40] Calabretta C, Agati M, Zimbone M, Boninelli S, Castiello A, Pecora A, Fortunato G, Calcagno L, Torrisi L and La Via F 2019 Laser annealing of P and Al implanted 4H-SiC epitaxial layers Materials 12 3362

[41] Dobrzhinetskaya L, Mukhin P, Wang Q, Wirth R, O’Bannon E, Zhao W X, Eppelbaum L and Sokhonchuk T 2018 Moissanite (SiC) with metal-silicide and silicon inclusions from tuff of Israel: Raman spectroscopy and electron microscope studies Lithos 310–311 355–68

[42] Wang Z, Wu Y L, Dai Y F, Li S Y and Zhou X S 2008 Rapid detection of subsurface damage of optical materials in lapping process and its influence regularity Opt. Precis. Eng. 1 16–21