Characteristics of heat transfer and pressure boosting in high-pressure water injecting into liquid lead-bismuth

Han HU; Gen LI; Xiaowen LIANG

doi:10.11889/j.0253-3219.2025.hjs.48.230493

[1] Jeong J H, Kweon Y C. The effect of tube rupture location on the consequences of multiple steam generator tube rupture event[J]. Annals of Nuclear Energy, 29, 1809-1826(2002).

[2] WEI Shiying, WANG Chenglong, TIAN Wenxi et al. Research progress in key thermal-hydraulic issue of lead-based fast reactor[J]. Atomic Energy Science and Technology, 53, 326-336(2019).

[3] Ciampichetti A, Agostini P, Benamati G et al. LBE–water interaction in sub-critical reactors: First experimental and modelling results[J]. Journal of Nuclear Materials, 376, 418-423(2008).

[4] Ciampichetti A, Bernardi D, Cadiou T et al. LBE–water interaction in LIFUS5 facility under different operating conditions[J]. Journal of Nuclear Materials, 415, 449-459(2011).

[5] Del Nevo A, Ciampichetti A, Forgione N et al. LIFUS5/MOD2: the experimental facility for HLM/water interaction investigation[C], 677-684(2013).

[6] ZHANG Chaodong. Analysis and study on the influence of steam generator pipeline rupture on thermal safety characteristics of lead-based reactor[D](2018).

[7] Cheng S B, Zou Y L, Dong Y H et al. Experimental study on pressurization characteristics of a water droplet entrapped in molten LBE pool[J]. Nuclear Engineering and Design, 378, 111192(2021).

[8] Zhang L, Deng C, Liu X J. Experimental investigation on the interaction characteristics of lead-bismuth liquid metal and water[J]. International Communications in Heat and Mass Transfer, 149, 107117(2023).

[9] Pesetti A, Tarantino M, Forgione N. Experimental and numerical analysis of steam generator tube rupture event for MYRRHA reactor in CIRCE facility with SIMMER-IV code[C](2018).

[10] Del Nevo A, Ciampichetti A, Tarantino M et al. Addressing the heavy liquid metal–Water interaction issue in LBE system[J]. Progress in Nuclear Energy, 89, 204-212(2016).

[11] Eboli M, Forgione N, Del Nevo A. Assessment of SIMMER-III code in predicting Water Cooled Lithium Lead Breeding Blanket “in-box-Loss of Coolant Accident”[J]. Fusion Engineering and Design, 163, 112127(2021).

[12] Wang S, Flad M, Maschek W et al. Evaluation of a steam generator tube rupture accident in an accelerator driven system with lead cooling[J]. Progress in Nuclear Energy, 50, 363-369(2008).

[13] Huang X, Chen P, Yin Y et al. Numerical investigation on LBE-water interaction for heavy liquid metal cooled fast reactors[J]. Nuclear Engineering and Design, 361, 110567(2020).

[14] Sibamoto Y, Kukita Y, Nakamura H. Visualization and measurement of subcooled water jet injection into high-temperature melt by using high-frame-rate neutron radiography[J]. Nuclear Technology, 139, 205-220(2002).

[15] Gu Z X, Wang G, Bai Y Q et al. Preliminary investigation on the primary heat exchanger lower head rupture accident of forced circulation LBE-cooled fast reactor[J]. Annals of Nuclear Energy, 81, 84-90(2015).

[16] Jeltsov M, Villanueva W, Kudinov P. Steam generator leakage in lead cooled fast reactors: Modeling of void transport to the core[J]. Nuclear Engineering and Design, 328, 255-265(2018).

[17] Iskhakov A S, Melikhov V I, Melikhov O I et al. Steam generator tube rupture in lead-cooled fast reactors: Estimation of impact on neighboring tubes[J]. Nuclear Engineering and Design, 341, 198-208(2019).

[18] YU Qifan, ZHAO Yafeng, WANG Chenglong et al. Thermal-hydraulic simulation and steam cavity diffusion of SGTR accident in lead-cooled fast reactor[J]. Atomic Energy Science and Technology, 56, 2015-2023(2022).

[19] Shih T H, Liou W W, Shabbir A et al. A new k-ε eddy viscosity model for high Reynolds number turbulent flows[J]. Computers & Fluids, 24, 227-238(1995).

[20] El-Amin M F, Sun S, Heidemann W et al. Analysis of a turbulent buoyant confined jet modeled using realizable k-ɛ model[J]. Heat and Mass Transfer, 46, 943-960(2010).

[21] Shaheed R, Mohammadian A, Kheirkhah Gildeh H. A comparison of standard k-ε and realizable k-ε turbulence models in curved and confluent channels[J]. Environmental Fluid Mechanics, 19, 543-568(2019).

[22] Sun D L, Xu J L, Wang L. Development of a vapor–liquid phase change model for volume-of-fluid method in FLUENT[J]. International Communications in Heat and Mass Transfer, 39, 1101-1106(2012).

[23] Yuan J J, Liu L, Bao R Q et al. Three-dimensional numerical simulation of the interaction between high-pressure sub-cooled water jet impacting high-temperature liquid lead-bismuth metal[J]. Applied Thermal Engineering, 230, 120705(2023).

微信扫一扫：分享

微信扫一扫：分享