[1] HAMBACH M,VOLKMER D. Properties of 3D-printed fiber-reinforced Portland cement paste［J］. Cement and Concrete Composites,2017,79: 62-70.
[2] LIU C B,LIU L B,ZHANG L H,et al. Research progress on preparation and characterization of gypsum-based-materials used for 3D printing［J］. China Building Materials Science & Technology,2021,30(3): 23-28 (in Chinese).
[3] MA B G,PENG Y,TAN H B,et al. Effect of polyacrylic acid on rheology of cement paste plasticized by polycarboxylate superplasticizer［J］. Materials,2018,11(7): 1081.
[4] OU Z H,MA B G,JIAN S W. Influence of cellulose ethers molecular parameters on hydration kinetics of Portland cement at early ages［J］. Construction and Building Materials,2012,33: 78-83.
[5] ZHI Z Z. Research of rheology characteristic and structure formation of 3D priting high-strength gypsum materials［D］.Wuhan: Wuhan University of Technology,2018 (in Chinese).
[6] KAWASHIMA S,CHAOUCHE M,CORR D J,et al. Influence of purified attapulgite clays on the adhesive properties of cement pastes as measured by the tack test［J］. Cement and Concrete Composites,2014,48: 35-41.
[7] LIU H R,TIAN Z H,SUN X,et al. A conceptual model focusing on internal flocculation structures and water film thickness for analyzing fresh properties of cement paste containing attapulgite［J］. Construction and Building Materials,2022,325: 126836.
[8] LIU H R,SUN X,TIAN Z H,et al. Characterization of the structural build-up of cementitious suspensions containing attapulgite from the perspective of flocculent structure［J］. Construction and Building Materials,2023,373: 130867.
[9] MA S W,KAWASHIMA S. Investigating the working mechanisms of viscosity-modifying admixtures through rheological and water transport properties［J］. Journal of Materials in Civil Engineering,2020,32(2).
[10] HUANG Y M,MAO Y P,WANG X J,et al. Preparation and properties of a-hemihydrate gypsum 3D printing slurry material［J］. Bulletin of the Chinese Ceramic Society,2021,40(6):1979-1986 (in Chinese).
[11] PANDA B,RUAN S Q,UNLUER C,et al. Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay［J］. Composites Part B: Engineering,2019,165: 75-83.
[12] JIAN S W,YANG X,GAO W B,et al. Study on performance and function mechanisms of whisker modified flue gas desulfurization (FGD) gypsum［J］. Construction and Building Materials,2021,301(7): 124341.
[13] YU Y,JIA J H,DUAN B,et al. Effects of attapulgite and nano-silica on 3D printability of high strength gypsum plaster［J］. Bulletin of the Chinese Ceramic Society,2021,40(6): 1987-1996 (in Chinese).
[14] YAN J H,ZHOU M Y,FAN J Y,et al. Exploration of the compressive strength and microscopic properties of Portland cement taking attapulgite and montmorillonite clay as an additive［J］. Materials,2023,16(5): 1794.
[15] CHEN J B. Study on hydration activity and rheological properties of calcined attapulgite modified cement-based materials［D］.Hangzhou: Zhejiang University of Technology,2020 (in Chinese).
