[1] ZANELLI C, CONTE S, MOLINARI C, et al. Waste recycling in ceramic tiles: a technological outlook［J］. Resources, Conservation and Recycling, 2021, 168: 105289.
[2] TORRE V, RAMBALDI E, MASI G, et al. Validation of antibacterial systems for sustainable ceramic tiles［J］. Coatings, 2021, 11(11): 1409.
[3] ZHONG X Z, CAO L Y, HUANG J F, et al. Formula optimization and mechanical properties of thin porcelain ceramic plates mainly containing smoky quartz tailings［J］. Ceramics International, 2022, 48(16): 24056-24062.
[4] MIRANDA G V, RODRIGUES NETO J B, BERNARDIN A M. Hydro deformation in ceramic tiles at the pre-firing stage［J］. Journal of the European Ceramic Society, 2021, 41(14): 7311-7320.
[5] SILVA A L, DONDI M, RAIMONDO M, et al. Photocatalytic ceramic tiles: challenges and technological solutions［J］. Journal of the European Ceramic Society, 2018, 38(4): 1002-1017.
[6] SUN Y, WU T Y, BAO Y W, et al. Preparation and strengthening mechanism of prestressed ceramic tile components［J］. International Journal of Applied Ceramic Technology, 2022, 19(1): 604-611.
[7] SILVA A L, FELTRIN J, DAL B M, et al. Effect of reduction of thickness on microstructure and properties of porcelain stoneware tiles［J］. Ceramics International, 2014, 40(9): 14693-14699.
[9] GAO Y Q, ZHANG L F, WANG X W, et al. Interfacial characterization of an oxide fiber-reinforced silica matrix composite containing a single layer pyrocarbon interphase［J］. Ceramics International, 2016, 42(5): 6504-6509.
[10] HIREMATH N, MAYS J, BHAT G. Recent developments in carbon fibers and carbon nanotube-based fibers: a review［J］. Polymer Reviews, 2017, 57(2): 339-368.
[11] DENG Y, LI W G, WANG X R, et al. Temperature-dependent tensile strength model for 2D woven fiber reinforced ceramic matrix composites［J］. Journal of the American Ceramic Society, 2018, 101(11): 5157-5165.
[12] CAPRICHO J C, FOX B, HAMEED N. Multifunctionality in epoxy resins［J］. Polymer Reviews, 2020, 60(1): 1-41.
[13] DONG M, ZHANG H, TZOUNIS L, et al. Multifunctional epoxy nanocomposites reinforced by two-dimensional materials: a review［J］. Carbon, 2021, 185: 57-81.
[14] GU H B, MA C, GU J W, et al. An overview of multifunctional epoxy nanocomposites［J］. Journal of Materials Chemistry C, 2016, 4(25): 5890-5906.
[15] FUERTES V, REINOSA J J, FERNNDEZ J F, et al. Engineered feldspar-based ceramics: a review of their potential in ceramic industry［J］. Journal of the European Ceramic Society, 2022, 42(2): 307-326.
[16] BAZZOCCHI F, BERTAGNI S, CIACCI C, et al. Mechanical characterisation of a low-thickness ceramic tile cladding subject to ageing phenomena［J］. Journal of Building Engineering, 2020, 29: 101105.
[17] LI T, CAO X X, WANG Q, et al. Numerical modeling of dynamic response and microcracking in shock-loaded polycrystalline transparent ceramic［J］. Journal of Applied Physics, 2021, 129(20): 205103.
[18] DROZDOV A V. Investigation on the microcracking of ceramic materials using the acoustic emission method［J］. Strength of Materials, 2014, 46(1): 71-79.
[19] SHAO Y F, SONG F, LIU B Y, et al. Observation of ceramic cracking during quenching［J］. Journal of the American Ceramic Society, 2017, 100(2): 520-523.
[20] SEVENER K M, TRACY J M, CHEN Z, et al. Crack opening behavior in ceramic matrix composites［J］. Journal of the American Ceramic Society, 2017, 100(10): 4734-4747.
