[1] FRANCIS E H T, LIANG Y C,LOGEESWARAN V J. Design and fabrication of a micromachined resonant gyroscope[J].International Journal of Electronics,1999,86(10):1179-1197.
[2] SONG C, SHINN M. Commercial vision of silicon-based inertial sensors [J].Sensors and Actuators:Physical,1998,66(1-3):231-236.
[3] XIE H, FEDDER G K. Fabrication, characterization, and analysis of a DRIE CMOS-MEMS gyroscope[J].IEEE Sensors Journal,2003,3(5):622-631.
[4] ZHAO Y, SU Y.Influence of drive modes on ourput signals of micro-fluidic gyroscope [J].Opt. Precision Eng.,2008,16(5):889-893.(in Chinese)
[5] TANAKA K, MOCHIDA Y, OHWADA K, et al.. A micromachined vibrating gyroscope [J].Sensors and Actuators A:Physical,1995,50:111-115.
[6] AYAZI F, NAJAFI K. A HARPSS polysilicon vibrating ring gyroscope[J].IEEE/ASME JMEMS,2001(6):169-179.
[7] PARTRIDGE A, KURTH R J, JOHA D G, et al.. An integrated controller for tunnel sensors [J].IEEE Journal of Solid-State Circuit ,1999,34(8):1099-1106.
[8] JIANG M, HE X Y.Optical testing of dynamic characteristic of vibrating wheel micromechanical gyroscope[J].Opt.Precision Eng.,2008,16(2):295-299.(in Chinese)
[9] LI J L, FANG J CH, DONG H F,et al..Calculation and simulation of silicon MEMS gyroscope with dual-mass resonant output[J].Opt. precision Eng.,2008,16(3):484-491.(in chinese)
[10] SHI Q, QIU A P, ZHU X H,et al.. Mechanical coupling error of silicon microgyroscope[J].Opt.Precision Eng.,2008,16(5):598-602.(in Chinese)s
[11] KUBENA R L,VICKERS-KIRBY D L, FRED-ERICK P, et al.. A new tunneling-based sensor for inertial rotation rate measurements[J].Journal of Microelectromechanical system,1999,8(4):439-447.
[12] CHEN Y, JIAO J W ,WANG Y L, et al.. Design and noise analysis of a micromachined gyeoscope working at atmospheric pressure[J].Chinese Journal of Semiconductors,2005,26(11):148-152.
[13] FU L,MIAO J M,LI X X,et al.. Study of deep silicon etching for micro-gyeoscope fabrication [J].Applied Surface Science,2001,177:78-84.
[14] LIZH, YANG Z C, WANG Y Y,et al.. A bulk micromachined vibratory lateral gyroscope fabricated with wafer bonding and deep ternch etching [J].Sensor and Actuators, 2000,83:24-29.
