• Optics and Precision Engineering
  • Vol. 18, Issue 8, 1814 (2010)
LIU Qiang*, FANG Jian-cheng, HAN Bang-cheng, and BAI Guo-chang
Author Affiliations
  • [in Chinese]
  • show less
    DOI: Cite this Article
    LIU Qiang, FANG Jian-cheng, HAN Bang-cheng, BAI Guo-chang. Locking device for magnetic bearing flywheel and its optimization[J]. Optics and Precision Engineering, 2010, 18(8): 1814 Copy Citation Text show less
    References

    [1] GERLACH B, EHINGER M, RAUE H K. Digital controller for a gimballing magnetic bearing reaction wheel[C].AIAA Guidance, Navigation, and control conference and exhibit Aug. 2005, 15-18, San Francisco, California:1-6.

    [2] XU Y L, DUN Y Q, WANG X H, et al. Analysis of hybrid magnetic bearing with a permanent magnet in the rotor by FEM[J]. IEEE. Transactions on magnetics, 2006,42(4):1363-1366.

    [3] LIU B,FANG J CH, LIU G. Implementation of active vibration control for magnetically suspended flywheels based on TMS320C6713B+FPGA digital controller[J]. Opt. Precision Eng., 2009,17(1):152-157.(in Chinese)

    [4] FANG J CH,YANG L,SUN J J,et al.. Novel permanent-magnet bias radial magnetic bearing used in magnetical suspended flywheel[J].Opt. Precision Eng.,2008,16(3):444-451.(in Chinese)

    [5] LIVET J L, BRETAUDEAU M. Temporary locking device for inertia wheel. USA,4345485 [P]. 1982-08-24.

    [6] BEAU J F, GAUTHIER M. Kinetic wheel arrangement incorporating magnetic suspension provided with means for caging its rotor. USA, 4566740[P]. 1986-01-28.

    [7] PRIVAT M,COSTA A D. Penumatic locking device for magnetic bearing reaction wheel[C]. Proceedings of the 10th European space mechanisms and tribology symposium, San Sebastian, Spain, 2003:1-8.

    [8] GUELIS H V D,JOLY J L. Device for temporarily locking a rotor onto a stator. USA, 4872357 [P]. 1989-10-10.

    [9] YE Q H. Structure analysis and optimum design for magnetically suspended reaction flywheel and experimental research[D].Beijing:Beijing university of aeronautics and astronautics master's degree paper,2007.(in Chinese)

    [10] LIU X D,YU L H. Development of automatic locking system for magnetic bearing flywheel[J].Machinery & electronics,2007(3):33-36. (in Chinese)

    [11] HAN B CH, LIU Q. Electromagnetic locking device based on self-locking for magnetic suspended flywheel[J]. Opt. Precision Eng.,2006,14(4):2456-2464. (in Chinese)

    [12] HAN B CH, HU G, FANG J CH. Optimization design of magnetic suspended gyroscope rotor[J].Opt. Precision Eng.,2006,14(4):662-666.(in Chinese)

    [13] YE Q H, LI H, HAN B CH. Optimization design of magntic bearing reaction wheel rotor using iSIGHT software[J]. Journal of astronautic, 2007,28(6):1619-1623. (in Chinese)

    CLP Journals

    [1] TANG Ji-qiang, ZHANG Yong-bin, ZHAO Li-bin. Interference fitted metal-composite material flywheel rotor[J]. Optics and Precision Engineering, 2013, 21(10): 2639

    [2] LIU Qiang, FANG Jian-cheng, HAN Bang-cheng. Detection of locking protection effect for magnetic bearing flywheel[J]. Optics and Precision Engineering, 2015, 23(1): 157

    [3] LIU Qiang, FANG Jian-cheng. Repeated clamping locking device for magnetic bearing flywheel[J]. Optics and Precision Engineering, 2012, 20(8): 1802

    [4] LIU Qiang, FANG Jian-cheng, HAN Bang-cheng. Research and development status of locking protection technologies for magnetic bearing flywheels[J]. Optics and Precision Engineering, 2014, 22(9): 2465

    [5] TANG Ji-qiang, ZHAO Shao-pu, WANG kuo. Reliability design and structural optimization of locking device for magnetic suspension control moment gyro[J]. Optics and Precision Engineering, 2018, 26(3): 597

    LIU Qiang, FANG Jian-cheng, HAN Bang-cheng, BAI Guo-chang. Locking device for magnetic bearing flywheel and its optimization[J]. Optics and Precision Engineering, 2010, 18(8): 1814
    Download Citation