• Opto-Electronic Engineering
  • Vol. 46, Issue 6, 180460 (2019)
Dang Xiangyu*
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.12086/oee.2019.180460 Cite this Article
    Dang Xiangyu. Preparation and properties of solar-blind photomultiplier tube[J]. Opto-Electronic Engineering, 2019, 46(6): 180460 Copy Citation Text show less

    Abstract

    The photocathode of solar-blind photomultiplier tube is Te-Cs, and the glass tube is synthetic quartz. We use special oven with two lights to prepare solar-blind photomultiplier tube. We test the performance of solar-blind photomultiplier tubes. Results show that CR340 has good solar-blind characteristic, cut-off wavelength at 320 nm, and output sensitivity can reach 5×105 A/W (250 nm), and gain can reach 1.3×107, and life is more than 1000 h. Solar-blind photomultiplier tubes are evaluated by several domestic analytical instruments manufacturers, all feed-back are very good.
    Dang Xiangyu. Preparation and properties of solar-blind photomultiplier tube[J]. Opto-Electronic Engineering, 2019, 46(6): 180460
    Download Citation