[1] ZHANG H.Development of ammunition for the demand and promotion of fuze technology ［J］. Journal of Ordnance Equipment Engineering, 2018(3): 1-5. (in Chinese)

[2] BU CH, NIE W R, XU A D, et al.. Shock reliability enhancement by flexible stop for MEMS inertial switch ［J］. Opt. Precision Eng., 2017, 25(3): 123-132. (in Chinese)

[3] LIU M ZH, WANG T SH, LI H F, et al.. Electrostatic field assisted micro imprint lithography technology ［J］.Opt. Precision Eng., 2017, 25(3): 663-671. (in Chinese)

[4] FAN W M, LIU SH J, WANG L SH, et al..Application of MEMS accelerometer in antiaircraft missile fuze ［J］. Journal of Ordnance Equipment Engineering, 2018(3): 75-82. (in Chinese)

[5] MA B H. Control function and characteristics of modern fuzes ［J］.Journal of Detection & Control, 2008, 30(1): 1-5. (in Chinese)

[6] HUANG D Y, ZHANG SH L. Design of new type of depth bomb fuze arming mechanism ［J］. Journal of Ordnance Equipment Engineering, 2017(1): 47-50. (in Chinese)

[7] DEFENSE TECHNICAL INFORMATION CENTER. OSD RDT&E project justification (R2a exhibit) ［EB/OL］.http: //www.ditc.mil/descriptivesum/Y2012/OSD/0603225D8Z.pdf, 2012.02.

[8] MCENTIRE R S, BUTLER P. Fuzing & firing systems at sandia national laboratories ［C］. NDIAs 58rd Annual Fuze Conference, 2014.

[9] JOHN D H. Evolving requirements for the use of logic devices in the implementation of safety features or an update to the DoD Fuze Engineering Standardization Working Groups (FESWG) technical manual for the use of logic devices in safety features ［C］. 55th Annua1 Fuze Conference, 2011.

[10] BEAMESDERFER M, CHEN S P, DEVOE D, et al.. Analysis of an optical energy interrupter for MEMS based safety and arming systems ［J］.SPIE, 1999, 3880: 101-111.

[11] SHAN T Q. Research on the State Control Technology of Fuze Electronic Safety System Based on MOEMS ［D］. Shijiazhuang: Ordance Engineering College, 2016. (in Chinese)

[12] BLAIR P, MCMILLAN D, PODLECKI J, et al.. MEMS hybridisation-bridging the free-space gap ［J］.SPIE, 2001, 4407: 193-201.

[13] TI Q SH, XING L Q. Analysis and design of a high power laser interrupter for MEMS based safety and arming systems ［J］. Microsystem Technologies, 2016, 26: 382-401.