• Chinese Journal of Lasers
  • Vol. 39, Issue 11, 1108010 (2012)
Tao Ning*, Zeng Zhi, Feng Lichun, Kong Dejuan, and Zhang Cunlin
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/cjl201239.1108010 Cite this Article Set citation alerts
    Tao Ning, Zeng Zhi, Feng Lichun, Kong Dejuan, Zhang Cunlin. Finite Element Modeling of Subsurface Recognition for Pulsed Thermography[J]. Chinese Journal of Lasers, 2012, 39(11): 1108010 Copy Citation Text show less
    References

    [1] Xiaoyan Han, L. D. Favro, R. L. Thomas. Thermal wave NDI of disbonds and corrosion in aircraft[C]. 1998 the Second Joint NASA/FAA/DOD Conference on Aging Aircraft, NASA/CP-1999-208982, 1998. 265

    [2] Zeng Zhi, Tao Ning, Feng Lichun et al.. Adopting the ratio of defect size over depth to quantitatively study the effect of defect size on the measurement of defect depth[J]. Chinese J. Lasers, 2011, 38(s1): s108005

    [3] P. Theodorakeas, N. P. Avdelidis, K. Hrissagis et al.. Automated transient thermography for the inspection of CFRP structures: experimental results and developed procedures[C]. SPIE, 2011, 8013: 80130W

    [4] Dapeng Chen, Zhi Zeng, Cunlin Zhang et al.. Air-coupled ultrasonic infrared thermography for inspecting impact damages in CFRP composite[J]. Chin. Opt. Lett., 2012, 10(s1): s10401

    [5] Zhi Zeng, Jing Zhou, Ning Tao et al.. Absolute peak slope time based thickness measurement using pulsed thermography[J]. Infrared Phys. & Technol., 2012, 55(2-3): 200~204

    [6] J. G. Sun. Analysis of pulsed thermography methods for defect depth prediction[J]. J. Heat Transfer, 2006, 128(4): 329~338

    [7] Jiangang Sun. Evaluation of ceramic matrix composites by thermal diffusivity imaging[J]. Int. J. Appl. Ceram. Technol., 2007, 4(1): 75~87

    [8] W. J. Parker, R. J. Jenkins, C. P. Butler et al.. Flash method of determining thermal diffusivity, heat capacity and thermal conductivity[J]. J. Appl. Phys., 1961, 32(9): 1679~1684

    [9] P. S. Gaal, M. A. Thermitus, D. E. Stroe. Thermal conductivity measurements using the flash method[J]. J. Therm. Anal. & Calorimet., 2004, 78(1): 185~189

    [10] Zhi Zeng, Chunguang Li, Ning Tao et al.. Depth prediction of non-air interface defects in pulsed thermography[J]. NDT&E International, 2012, 48: 39~45

    [11] Tao Ning, Zeng Zhi, Feng Lichun et al.. Thermal effusivity measurement of subsurface heterogeneous materials using pulsed thermography[J]. Infrared and Laser Engineering, 2011, 40(11): 2098~2103

    [12] S. K. Lau, D. P. Almond, P. M. Patel. Transient thermal wave techniques for the evaluation of surface coatings[J]. J. Phys. D: Appl. Phys., 1991, 24(3): 428~436

    [13] C. A. Bennett, R. R. Patty. Thermalwave interferometry: a potential application of the photoacoustic effect[J]. Appl. Opt., 1982, 21(1): 49~54

    CLP Journals

    [1] Huang Xinping, Tao Ning, Jiang Yulong, Wang Zhonghua, Zhang Cunlin. Thermal Wave Nondestructive Testing of Honeycomb Defects and Finite Element Modeling[J]. Acta Optica Sinica, 2013, 33(6): 612002

    Tao Ning, Zeng Zhi, Feng Lichun, Kong Dejuan, Zhang Cunlin. Finite Element Modeling of Subsurface Recognition for Pulsed Thermography[J]. Chinese Journal of Lasers, 2012, 39(11): 1108010
    Download Citation