Mechanical responses and crystal plasticity model of CoCrNi medium-entropy alloy under ramp wave compression

Jinlei Dong; Xuping Zhang; Guiji Wang; Xianqian Wu; Binqiang Luo; Xuemiao Chen; Fuli Tan; Jianheng Zhao; Chengwei Sun

doi:10.1063/5.0206773

[1] E. P.George, D.Raabe, R. O.Ritchie. High-entropy alloys. Nat. Rev. Mater., 4, 515(2019).

[2] S. X.Bai, S.Li, P. K.Liaw, J. W.Qiao, Y.Tang, R. X.Wang, B.Xiao, Y.Zhang, Z. R.Zhang. A review on the dynamic-mechanical behaviors of high-entropy alloys. Prog. Mater. Sci., 135, 101090(2023).

[3] S. G.Ma, J. W.Qiao, Z. H.Wang, Y. C.Wu, T. W.Zhang, Y.Zhang, D.Zhao. Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling. Int. J. Plast., 124, 226(2020).

[4] G. B.Bian, H. W.He, Z. M.Jiao, P. K.Liaw, J. W.Qiao, Y. Z.Wang, Z. H.Wang, H. J.Yang. Dynamic tension and constitutive model in Fe₄₀Mn₂₀Cr₂₀Ni₂₀ high-entropy alloys with a heterogeneous structure. Mater. Sci. Eng.: A, 839, 142837(2022).

[5] X.Jin, P. K.Liaw, J. W.Qiao, K.Wang, Y.Zhang. Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures. Phys. Rev. Mater., 5, 113608(2021).

[6] J. C.Cheng, A. R.Cui, S. C.Hu, J. Y.Huang, Q.Li, S. N.Luo, S.Zhang. Spall response of medium-entropy alloy CrCoNi under plate impact. Int. J. Mech. Sci., 252, 108331(2023).

[7] F.Cao, L.Dai, X.Liang, A. M.Minor, R. O.Ritchie, C. J.Ruestes, S.Yin, Q.Yu, R.Zhang, S.Zhao. Deformation and failure of the CrCoNi medium-entropy alloy subjected to extreme shock loading. Sci. Adv., 9, eadf8602(2023).

[8] J.Cheng, L.Cui, J.Huang, J.Qiao, K.Shi, Z.Wang, H.Yang, M.Zhang. Ballistic impact response of Fe₄₀Mn₂₀Cr₂₀Ni₂₀ high-entropy alloys. J. Appl. Phys., 132, 205105(2022).

[9] Y.Akahama, S. J.Ali, D. G.Braun, J. L.Brown, J. P.Davis, J. H.Eggert, A.Fernandez-Pañella, D. E.Fratanduono, R. G.Kraus, M. C.Marshall, J. M.McNaney, M.Millot, E. F. O’Bannon, C. T.Seagle, R. F.Smith. Establishing gold and platinum standards to 1 terapascal using shockless compression. Science, 372, 1063(2021).

[10] J. R.Asay, R. C.Cauble, M. D.Furnish, C. A.Hall, M. D.Knudson, D. B.Reisman, A.Toor. Magnetically driven isentropic compression experiments on the Z accelerator. J. Appl. Phys., 89, 1625(2001).

[11] B.Chen, K.Chen, Y.Cui, J.Dai, H.Geng, D.Kang, Y.Shen, J.Wu, J.Yu, Y.Yu. On the thermodynamics of plasticity during quasi-isentropic compression of metallic glass. Matter Radiat. Extremes, 9, 027802(2024).

[12] J. C.Cheng, J. Y.Huang, J.Li, S. N.Luo, J. W.Qiao, K. W.Shi, J.Xu, Q.Zhang, X. J.Zhao. Shock compression and spallation of a medium-entropy alloy Fe₄₀Mn₂₀Cr₂₀Ni₂₀. Mater. Sci. Eng.: A, 847, 143311(2022).

[13] T.Li, Y.Lu, M.Wang, X.Wei, D.Xu. A critical review of the mechanical properties of CoCrNi-based medium-entropy alloys. Microstructures, 2, 2022001(2022).

[14] S. N.Bland, C.Liu, B.Luo, C.Sun, F.Tan, G.Wang, X.Zhang, F.Zhao, J.Zhao. Mechanical response of near-equiatomic NiTi alloy at dynamic high pressure and strain rate. J. Alloys Compd., 731, 569(2018).

[15] B.Chen, J.Chen, K.Li, J. F.Lin, H. K.Mao, W.Yang, H.Zheng. Recent advances in high-pressure science and technology. Matter Radiat. Extremes, 1, 59(2016).

[16] T. R.Bieler, P.Eisenlohr, L.Hantcherli, D.Raabe, F.Roters, D. D.Tjahjanto. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications. Acta Mater., 58, 1152(2010).

[17] R.Kapoor, S.Nemat-Nasser. Deformation behavior of tantalum and a tantalum tungsten alloy. Int. J. Plast., 17, 1351(2001).

[18] L.Anand, M.Kothari. Elasto-viscoplastic constitutive equations for polycrystalline metals: Application to tantalum. J. Mech. Phys. Solids, 46, 51(1998).

[19] R. W.Armstrong, S. M.Walley. High strain rate properties of metals and alloys. Int. Mater. Rev., 53, 105(2008).

[20] R. W.Armstrong, Q. Z.Li. Dislocation mechanics of high-rate deformations. Metall. Mater. Trans. A, 46, 4438(2015).

[21] K. V.Khishchenko, P. R.Levashov, A. E.Mayer, P. N.Mayer. Modeling of plasticity and fracture of metals at shock loading. J. Appl. Phys., 113, 193508(2013).

[22] X.Pei, Q.Wu, S.Yao, J.Yu. Assessment of the time-dependent behavior of dislocation multiplication under shock loading. Int. J. Plast., 158, 103434(2022).

[23] Y.Cui, X.Pei, Q.Wu, S.Yao, J.Yu, Y.Yu. Revisiting the power law characteristics of the plastic shock front under shock loading. Phys. Rev. Lett., 126, 085503(2021).

[24] T.Chong, B.Luo, J.Mo, C.Sun, F.Tan, Y.Tao, G.Wang, G.Wu, X.Zhang, J.Zhao. A 4 MA, 500 ns pulsed power generator CQ-4 for characterization of material behaviors under ramp wave loading. Rev. Sci. Instrum., 84, 015117(2013).

[25] G. H.Chen, X. M.Chen, B. Q.Luo, F. L.Tan, G. J.Wanget?al.. Dynamic strength measurement of aluminum under magnetically driven ramp wave pressure-shear loading. Int. J. Impact Eng., 100, 56(2017).

[26] X.Chen, B.Luo, X.Pan, H.Peng, C.Sun, F.Tan, G.Wang, X.Zhang, J.Zhao. Uncertainty quantification of magnetically driven quasi-isentropic compression experiments based on Monte Carlo method. Explos. Shock Wave, 43, 031101(2022).

[27] K. V.Khishchenko, A. E.Mayer. High- and low-entropy layers in solids behind shock and ramp compression waves. Int. J. Mech. Sci., 189, 105971(2021).

[28] L. H.Dai, J. Y.He, Z. J.Jiang, Z. P.Lu, H. Y.Wang, H. S.Zhang. Shock compression response of high entropy alloys. Mater. Res. Lett., 4, 226(2016).

[29] S.Chen, Z. D.Feng, J. Y.Huang, L.Lu, S. N.Luo, Y. F.Sun, J.Xu, X. H.Yao, N. B.Zhang, X. J.Zhao. Shock compression and spallation damage of high-entropy alloy Al_0.1CoCrFeNi. J. Mater. Sci. Technol., 128, 1(2022).

[30] S. J.Fensin, E. N.Hahn. Influence of defects on the shock Hugoniot of tantalum. J. Appl. Phys., 125, 215902(2019).

[31] N. K.Bourne, J. E.Field, J. C. F.Millett, Z.Rosenberg. Shear strength measurements in a tungsten alloy during shock loading. J. Appl. Phys., 86, 6707(1999).

[32] S.Case, I. P.Jones, J. C. F.Millett, B.Pang, G.Whitemanet?al.. The defect evolution in shock loaded tantalum single crystals. Acta Mater., 148, 482(2018).

[33] J. C.LaSalvia, M. A.Meyers, V. F.Nesterenkoet?al.. Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum. Mater. Sci. Eng.: A, 229, 23(1997).

[34] H.Wang, S.Yang, Y.Yang. Effects of microstructure on the evolution of dynamic damage of Fe₅₀Mn₃₀Co₁₀Cr₁₀ high entropy alloy. Mater. Sci. Eng. A, 802, 140440(2021).

[35] S.Fensin, J.Gigax, M. C.Hawkins, R. S.Hixson, N.Li, C.Liu, S.Thomas, J. A.Valdez. Dynamic properties of FeCrMnNi, a high entropy alloy. Mater. Sci. Eng.: A, 840, 142906(2022).

[36] I. J.Beyerlein, A.Hunter, L. T. W.Smith, Y.Su, S.Xu. The effect of local chemical ordering on Frank-Read source activation in a refractory multi-principal element alloy. Int. J. Plast., 134, 102850(2020).

[37] Q. J.Li, E.Ma, H.Sheng. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways. Nat. Commun., 10, 3563(2019).

[38] M.Asta, J.Ding, R. O.Ritchie, Q.Yu. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys. Proc. Natl. Acad. Sci. U. S. A., 115, 8919(2018).

[39] I. J.Beyerlein, W. R.Jian, Y.Su, Z.Xie, S.Xu, X.Yao. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi. Acta Mater., 199, 352(2020).

[40] H.Bei, R.Huang, K.Jin, J. Y. P.Ko, J. C.Neuefeind, D. C.Pagan, G.Velisa, W. J.Weber, H.Xue, F. X.Zhang, Y. W.Zhang, S. J.Zhao. Local structure and short-range order in a NiCoCr solid solution alloy. Phys. Rev. Lett., 118, 205501(2017).

[41] M.Asta, Y.Chong, J.Ding, T.Jia, A. M.Minor, C.Ophus, R. O.Ritchie, R.Zhang, S.Zhao. Short-range order and its impact on the CrCoNi medium-entropy alloy. Nature, 581, 283(2020).

[42] X.Chen, Z.Cheng, P.Jiang, E.Ma, J.Wang, Q.Wang, X.Wu, F.Yuan, H.Zhou, L.Zhou. Atomic-scale evidence of chemical short-range order in CrCoNi medium-entropy alloy. Acta Mater., 224, 117490(2022).

[43] F.Chen, Y.Tian. Short-range order-dependent dislocation mobilities in CrCoNi medium entropy alloy: Atomistic simulations and modeling. Int. J. Plast., 172, 103859(2024).

[44] G.Eggeler, E. P.George, J.Hunfeld, A.Kostka, G.Laplanche, C.Reinhart. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi. Acta Mater., 128, 292(2017).

[45] C.Cui, K.Du, B.Fu, D.Qi, T.Yao, H.Ye, J.Zhang. Temperature effects on the transition from Lomer-Cottrell locks to deformation twinning in a Ni-Co-based superalloy. Scr. Mater., 125, 24(2016).

[46] E. P.George, B.Gludovatz, S. X.Mao, R. O.Ritchie, H.Sheng, Z.Wang, Q.Yu, Z.Zhang, Z.Zhang. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy. Nat. Commun., 8, 14390(2017).

[47] P.Jiang, E.Ma, Y.Ma, X. L.Wu, M.Yang, F.Yuan. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures. Acta Mater., 148, 407(2018).

[48] Y.Chen, L. H.Dai, T.Li, T. W.Liu, J.Meng, Y.Qiao, H. Y.Wang. A high-entropy alloy syntactic foam with exceptional cryogenic and dynamic properties. Mater. Sci. Eng.: A, 876, 145146(2023).

[49] X.Li, S.Sun, Y.Tian, J.Wang, Q.Zhu, Y.Zou. Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77 K. Mater. Res. Lett., 10, 385(2022).

[50] Y. Q.Cheng, A. L.Greer, E.Ma. Shear bands in metallic glasses. Mater. Sci. Eng.: R: Rep., 74, 71(2013).

[51] Rahul, S.De, A. R.Zamiri. A fully anisotropic single crystal model for high strain rate loading conditions with an application to α-RDX. J. Mech. Phys. Solids, 64, 287(2014).

[52] J. P.Hirth, J.Lothe, H. M.Zbib. Forces on high velocity dislocations. Modell. Simul. Mater. Sci. Eng., 6, 165(1999).

[53] R. A.Austin, D. L.McDowell. Parameterization of a rate-dependent model of shock-induced plasticity for copper, nickel, and aluminum. Int. J. Plast, 32–33, 134(2012).

[54] Z.Liu, X.Pei, Q.Wu, S.Yao, J.Yu, Y.Yu. Numerical investigation of the temperature dependence of dynamic yield stress of typical BCC metals under shock loading with a dislocation-based constitutive model. Mech. Mater., 140, 103211(2020).

[55] R. A.Austin, D. L.McDowell. A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates. Int. J. Plast, 27, 1(2011).

[56] V. V.Bulatov, W.Cai, J.Marian. Dynamic transitions from smooth to rough to twinning in dislocation motion. Nat. Mater., 3, 158(2004).

[57] N. R.Barton, B. S.El-Dasher, J. N.Florando, M.Kumar, J. M.Mcnaney. Analysis of deformation twinning in tantalum single crystals under shock loading conditions. J. Appl. Phys., 113, 083522(2013).

[58] H.Bei, E.George, G. M.Pharr, Z.Wu. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures. Acta Mater., 81, 428(2014).

[59] Y.Cui, Y.Li, X.Pei, H.Peng, Q.Wu, S.Yao, J.Yu, H.Zhang. A coupled phase-field and crystal plasticity model for understanding shock-induced phase transition of iron. Int. J. Plast., 172, 103860(2023).

[60] T.Chong, F.Huang, Y.Wu, Y.Wu, K.Yanget?al.. A unified model of anisotropy, thermoelasticity, inelasticity, phase transition and reaction for high-pressure ramp-loaded RDX single crystal. Int. J. Plast., 144, 103048(2021).

微信扫一扫：分享

微信扫一扫：分享