Usage of Additive for the Improvement of the Filling Effect during Filling the Grating Structure of the Nanoimprint Stamp

ZHENG Yong-guang; ZHANG Ran; LIU Ze; CHU Jin-kui

doi:10.3788/gzxb20184709.0905001

[1] CHOU S Y, KRAUSS P R, RENSTROM P J. Imprint of sub—25 nm vias and trenches in polymers［J］. Applied Physics Letters, 1995, 67(21): 3114-3116.

[2] ISHCHUK V, GULIYEV E, AYDOGAN C, et al. Scanning probe-based high-accuracy overlay alignment concept for lithography applications［J］. Applied Physics A, 2017, 123(1): 89.

[3] LIU Xin, ZHANG Man, PANG Hui,et al. Fabrication of large-angle diffractive optical element based on nanoimprint lithography［J］.Acta Photonica Sinica, 2016, 45(6): 0605001.

[4] ENDO T. Development of nanophotonics-based bioanalytical devices［J］. Bunseki Kagaku, 2015, 64(10): 751-757.

[5] L Wen-feng, ZHOU Bin, LUO Jian-dong,et al. Fabrication of silicon-based micro pore array with large-area and high aspect-ratio by photo-electrochemical etching［J］. Acta Photonica Sinica, 2012, 41(2): 228-231.

[6] KRAUSS P R, ChOU S Y. Fabrication of planar quantum magnetic disk structure using electron beam lithography, reactive ion etching, and chemical mechanical polishing［J］. Journal of Vacuum Science & Technology. B, Microelectronics and Nanometer Structures: Processing, Measurement, and Phenomena: an Official Journal of the American Vacuum Society, 1995, 13(6): 2850-2852.

[7] ANSARI K, SHAO P G, KAN J A V, et al. Proton beam fabrication of nickel stamps for nanoimprint lithography［J］. Nuclear Instruments & Methods in Physics Research, 2005, 231(1-4): 407-412.

[8] WERNER S, REHBEIN S, GUTTMANN P, et al. Towards high diffraction efficiency zone plates for X-ray microscopy［J］. Microelectronic Engineering, 2010, 87(5-8): 1557-1560.

[10] KIM H, SANG C S, HAN J, et al. Fabrication of metallic nano stamp to replicate patterned substrate using electron-beam recording, nanoimprinting, and electroforming［J］. IEEE Transactions on Magnetics, 2009, 45(5): 2304-2307.

[11] YUTAKA K, YASUAKI H, KATSUHIKO O. Monte Carlo simulation of thin film growth with defect formation: application to via filling［J］. Molecular Simulation, 2004, 30(13-15): 895-899.

[12] YAN J J, CHANG L C, LU C W, et al. Effects of organic acids on through-hole filling by copper electroplating［J］. Electrochimica Acta, 2013, 109(11): 1-12.

[13] SAITO T, TSUJIMOTO Y, MIYAMOTO Y, et al. Electrochemical study of multi-component additive behavior during copper electrodeposition with a microfluidic device and an electrochemical quartz crystal microbalance［J］. Japanese Journal of Applied Physics, 2015, 54(5S): 05EA04.

[14] REN S, LEI Z, WANG Z. Investigation of nitrogen heterocyclic compounds as levelers for electroplating cu filling by electrochemical method and quantum chemical calculation［J］. Journal of the Electrochemical Society, 2015, 162(10): D509-D514.

[15] TAO Z, HE W, WANG S, et al. Synergistic effect of different additives on microvia filling in an acidic copper plating solution［J］. Journal of the Electrochemical Society, 2016, 163(8): D379-D384.

[16] LI Y B, WANG W, LI Y L. Adsorption behavior and related mechanism of janus green B during copper via-filling process［J］. Journal of the Electrochemical Society, 2009, 156(4): D119-D124.