• Chinese Journal of Lasers
  • Vol. 39, Issue 10, 1003005 (2012)
Liu Dong1、*, Jiang Bin1, and Liu Minghou2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3788/cjl201239.1003005 Cite this Article Set citation alerts
    Liu Dong, Jiang Bin, Liu Minghou. Inlet/Outlet Arrangement Effect on the Flow Distribution and Heat Transfer in Mini-Channels[J]. Chinese Journal of Lasers, 2012, 39(10): 1003005 Copy Citation Text show less
    References

    [1] Ye Zhenxing, Su Yang, Zhu Yong et al.. Study on the pressure sensing measurement based on Stokes parameters of fiber gratings[J]. Chinese J. Lasers, 2012, 39(6): 0605003

    [2] Xu Gang, Liao Yong, Meng Fanbao et al.. Characteristics of two-lawer patch microstrip antenna for high power wide-band microwave radiation[J]. High Power Laser and Particles Brams, 2009, 21(12): 1839~1844

    [3] Mei Lifang, Chen Genyu, Liu Xufei et al.. Three-dimensional laser cutting technology in auto-body panel[J]. Chinese J. Lasers, 2009, 36(12): 3308~3312

    [4] Tao Yujia, Huai Xiulan, Li Zhigang et al.. Advancement of cooling techniques in high-power solid state laser[J]. Laser Journal, 2007, 28(2): 11~12

    [5] D. B. Tuckerman, R. F. W. Prese. High-performance heat sinking for VLSI[J]. IEEE Electron Device Letters, 1981, 2(5): 126~129

    [6] Liu Dong, Liu Minghou, Wang Yaqing et al.. Experimental studies on large height/width ratio and mini-channel radiator for high power density laser cooling[J]. Chinese J. Lasers, 2010, 37(3): 640~645

    [7] Wang Aiguo, Yuan Junfei, Wu Deyong et al.. Micro-channel heat sink with two phase impinging jets for laser diode bar[J]. Chinese J. Lasers, 2011, 38(10): 1002003

    [8] H. C. Chiu, J. H. Jang, H. W. Yeh et al.. The heat transfer characteristics of liquid cooling heatsink containing microchannels[J]. International Journal of Heat and Mass Transfer, 2011, 54(1-3): 34~42

    [9] S. Lalot, P. Florent, S. K. Lang et al.. Flow maldistribution in heat exchangers[J]. Applied Thermal Engineering, 1999, 19(8): 847~863

    [10] J. M. Commenge, L. Falk, J. P. Corriou et al.. Optimal design for flow uniformity in microchannel reactors[J]. AIChE Journal, 2002, 48(2): 345~358

    [11] J. Yue, R. Boichot, L. Luo et al.. Flow distribution and mass transfer in a parallel microchannel contactor integrated with constructal distributors[J]. AIChE Journal, 2010, 56(2): 298~317

    [12] J. Faco, J. Gruss. Flow distribution in a network of minichannels: simulation and experiment[C]. SHF-Microfluidics, 2006. 12~14

    [13] Liu Dong, Liu Minghou, Wang Yaqing et al.. Experimental study on the friction pressure drop of water flow in mini-channels with circular cylinder disturbed flow[J]. Chinese Journal of Theortical and Applied Mechanics, 2010, 42(6): 1006~1012

    Liu Dong, Jiang Bin, Liu Minghou. Inlet/Outlet Arrangement Effect on the Flow Distribution and Heat Transfer in Mini-Channels[J]. Chinese Journal of Lasers, 2012, 39(10): 1003005
    Download Citation