• Chinese Journal of Lasers
  • Vol. 42, Issue 7, 703006 (2015)
Liu Xiaoli*, Xiong Yuqing, Yang Jianping, Wang Rui..., Wu Gan and Ren Ni|Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/cjl201542.0703006 Cite this Article Set citation alerts
    Liu Xiaoli, Xiong Yuqing, Yang Jianping, Wang Rui, Wu Gan, Ren Ni. Simulation of Temperature Field for Laser Etching of Aluminum Thin Films on Polyimide Substrate[J]. Chinese Journal of Lasers, 2015, 42(7): 703006 Copy Citation Text show less
    References

    [1] Zhang Boming, Liu Shuang. Investigation on status and prospective application of composite multifunctional structures technology[J]. J Astronautics, 2007, 28(2): 493-497.

    [2] Yang Jianping, Chen Xuekang, Wu Gan, et al.. Mechanism of nano-second laser ablation of metallic thin film on composite material[J]. Chinese J Lasers, 2011, 38(6): 0603031.

    [3] Chung C K, Tan T K, Lin S L, et al.. Fabrication of sub-spot-size microchannel of microfluidic chip using CO2 laser processing with metal-film protection[J]. Micro & Nano Letters, 2012, 7(8): 736-739.

    [4] Conde J C, Lusquinos F, Gonzalez P, et al.. Laser ablation of silicon and copper targets, experimental and finite elements studies[J]. Applied Physics A, 2004, 79(4-6): 1105-1110.

    [5] Zhang Fei, Duan Jun, Zeng Xiaoyan, et al.. Study of blind holes drilling on flexible circuit board using 355 nm UV laser[J]. Chinese J Lasers, 2009, 36(12): 3143-3148.

    [6] Du Shaojun, Lu Qisheng, Shu Bohong. Calculation of laser-induced temperature increment and thermal stress of Al-film reflector[J]. Infrared and Laser Engineering, 2001, 30(2): 128-130.

    [7] Li T, Zhou C L, Liu Z G, et al.. Simulation of laser ablation of crystalline silicon solar cells by ANSYS[C]. International Conference on Consumer Electronics, Communications and Networks, 2011: 5228-5231.

    [8] Zang Yannan, Ni Xiaowu, Chen Yanbei. Simulation of long pulsed laser drilling on metal based on birth and death method of ANSYS[J]. Chinese J Lasers, 2013, 40(6): 0603005.

    [9] Qian Danhao, Wei Long, Xie Haiyin. Numerical simulation of temperature field pulse laser marking hard brittle material based on ANSYS[J]. Optical Technique, 2013, 39(6): 530-534.

    CLP Journals

    [1] Zhang Hongwei, Ren Ni, Xue Hongtao, Tang Fuling, Yan Xiaodong, Lu Wenjiang, Liu Xiaoli. Temperature Distribution for Laser Etching of Metal Thin Films on Polyimide Substrate[J]. Chinese Journal of Lasers, 2016, 43(5): 503009

    [2] Yan Xiaodong, Ren Ni, Tang Fuling, Xue Hongtao, Zhang Hongwei, Yang Jianping, Liu Xiaoli. Numerical Simulation of Movable Nanosecond Pulse Laser Etching of Metal/Polyimide[J]. Chinese Journal of Lasers, 2017, 44(4): 402001

    Liu Xiaoli, Xiong Yuqing, Yang Jianping, Wang Rui, Wu Gan, Ren Ni. Simulation of Temperature Field for Laser Etching of Aluminum Thin Films on Polyimide Substrate[J]. Chinese Journal of Lasers, 2015, 42(7): 703006
    Download Citation