[1] V YADAVA, R K PATEL. Design optimization of cubic Bezier horn for ultrasonic machining. Sādhanā, 45, 85(2020).
[2] M R RANI, K PRAKASAN, R RUDRAMOORTHY. Design and simulation of a large tubular horn for ultrasonic plastic welding. International Journal of Design Engineering, 5, 344(2014).
[3] S MOTTYLL, S MÜLLER, P NIEDERHOFER et al. Analysis of the cavitating flow induced by an ultrasonic horn-numerical 3D simulation for the analysis of vapour structures and the assessment of erosion-sensitive areas. EPJ Web of Conferences, 67(2014).
[4] S YOSHIMOTO. Squeeze-film gas bearing for a linear motion guide using a piezoelectric actuator. Jpn. J. of Trib., 36, 755(1991).
[5] S YOSHIMOTO. Floating characteristics of squeeze-film gas bearings with vibration absorber for linear motion guide. Journal of Tribology, 119, 531-536(1997).
[6] S YOSHIMOTO, Y ANNO, Y SATO et al. Float characteristics of squeeze-film gas bearing with elastic hinges for linear motion guide. JSME International Journal Series C, 40, 353-359(1997).
[7] T A STOLARSKI, Y XUE, S YOSHIMOTO. Air journal bearing utilizing near-field acoustic levitation stationary shaft case. Proceedings of the Institution of Mechanical Engineers， Part J： Journal of Engineering Tribology, 225, 120-127(2011).
[8] T A STOLARSKI, R GAWARKIEWICZ, K TESCH. Acoustic journal bearing-performance under various load and speed conditions. Tribology International, 102, 297-304(2016).
[9] K FENG, M H SHI, T GONG et al. A novel squeeze-film air bearing with flexure pivot-tilting pads： Numerical analysis and measurement. International Journal of Mechanical Sciences, 134, 41-50(2017).
[10] 10姚红良， 李文龙， 刘帅， 等. 超声挤压轴承-转子系统动力学特性研究［J］. 动力学与控制学报， 2019， 17（2）： 185-190.YAOH L， LIW L， LIUSH， et al. Dynamic characteristics of ultrasonic extrusion bearing-rotor system［J］. Journal of Dynamics and Control， 2019， 17（2）： 185-190. （in Chinese）
[11] W CHAO.
[12] 12唐照千. 圆錐形（及圆柱形）壳体的振动型式和固有频率［J］. 力学学报， 1963（2）： 133-153. doi: 10.6052/0459-1879-1963-2-1963-011TANGZH Q. The vibration modes and eigenfrequencies of circular conical （and cylindrical） shells［J］. Acta Mechanica Sinica， 1963（2）： 133-153. （in Chinese）. doi: 10.6052/0459-1879-1963-2-1963-011
[13] M ABIARKASHANI, Y ALIZADEH VAGHASL-OO, M AGHAMIRSALIM. Optimal design of high-pressure fuel pipe based on vibration response and strength using multi-objective genetic algorithm. Structural and Multidisciplinary Optimization, 64, 935-956(2021).
[14] 14赵劲松， 朱汉银， 任旭辉， 等. 插装式比例节流阀多目标遗传算法结构优化［J］. 中国机械工程， 2016， 27（2）： 215-221. doi: 10.3969/j.issn.1004-132X.2016.02.012ZHAOJ S， ZHUH Y， RENX H， et al. Structural optimization of cartridge proportional throttle valve based on multi objective genetic algorithm［J］. China Mechanical Engineering， 2016， 27（2）： 215-221. （in Chinese）. doi: 10.3969/j.issn.1004-132X.2016.02.012
[15] H C FU, P LIU. A multi-objective optimization model based on non-dominated sorting genetic algorithm. International Journal of Simulation Modelling, 18, 510-520(2019).
