Lattice Boltzmann Simulation of Laser-induced Transfer of Liquid

HUANG Ya-jun; CAI Wen-lai; CHEN Ying-huai; HUANG Zhi-gang

doi:10.3788/gzxb20184708.0847016

[1] ZENOU M, SA′AR A, KOTLER Z. Laser jetting of femto-liter metal droplets for high resolution 3D printed structures［J］. Scientific Reports, 2015, 5: 17265.

[2] INUI T, MANDAMPARAMBIL R, ARAKI T,et al. Laser-induced forward transfer of high-viscosity silver precursor ink for non-contact printed electronics［J］. Rsc Advances, 2015, 5(95): 77942-77947.

[3] KOUNDOURAKIS G, ROCKSTUHL C, PAPAZOGLOU D, et al. Laser printing of active optical microstructures［J］. Applied Physics Letters, 2001, 78(7): 868-870.

[4] SKARDAL A, ATALA A. Biomaterials for integration with 3-D Bioprinting［J］.Annals of Biomedical Engineering, 2015, 43(3): 730-746.

[5] FARID N, HARILAL S S, DING H, et al. Emission features and expansion dynamics of nanosecond laser ablation plumes at different ambient pressures［J］. Journal of Applied Physics, 2014, 115(3): 277.

[6] LI Ming, ZHANG Hong-chao, SHEN Zhong-hua, et al. Physical analyses of optical breakdown and plasma formation in water induced by laser［J］. Acta Photonica Sinica, 2005, 34(11): 1610-1614.

[7] FREEMAN J R, HARILAL S S, DIWAKAR P K, et al. Comparison of optical emission from nanosecond and femtosecond laser produced plasma in atmosphere and vacuum conditions［J］. Spectrochimica Acta Part B Atomic Spectroscopy, 2013, 87(9): 43-50.

[8] BRUJAN E A, NAHEN K, SCHMIDT P, et al. Dynamics of laser-induced cavitation bubbles near an elastic boundary used as a tissue phantom［J］. Journal of Fluid Mechanics, 2001, 433(433): 251-281.

[9] HILGENFELDT S, BRENNER M P, GROSSMANN S, et al. Analysis of Rayleigh-Plesset dynamics for sonoluminescing bubbles［J］. Journal of Fluid Mechanics, 2017, 365(365): 171-204.

[10] GRUENE M, UNGER C, KOCH L, et al. Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting［J］. Biomedical Engineering, 2011, 10(1): 19.

[11] BROWN M S. Experimental and numerical study of laser-induced forward transfer printing of liquids［M］. Dissertations & Theses - Gradworks, 2011.

[12] SHI Dong-yan, WANG Zhi-kai, ZHANG A-man. A modified lattice boltzmann model for simulating gas-liquid two-phase flow［J］. Journal of Mechanics, 2014, 46(2): 224-233.

[13] GUO Zhao-li. The principle and application of lattice Boltzmann method［M］. Science Press, 2009.

[14] MOHANMAD A A. Lattice Boltzmann method: fundamentals and engineering applications with computer codes［M］. London Springer, 2011: 15- 17.

[15] MAO X, WEN S B, RUSSO R E. Time resolved laser-induced plasma dynamics［J］. Applied Surface Science, 2007, 253(15): 6316-6321.

[16] SANO Y, MUKAI N, OKAZAKI K, et al. Residual stress improvement in metal surface by underwater laser irradiation［J］. Nuclear Instruments & Methods in Physics Research, 1997, 121(1): 432-436.

[17] FABBRO R, FOURNIER J, BALLARD P, et al. Physical study of laser‐produced plasma in confined geometry［J］. Journal of Applied Physics, 1990, 68(2): 775-784.

[18] BODNAR R J. A method of calculating fluid inclusion volumesbased on vapor bubble diameters and P-V-T-X properties of inclusion fluids［J］. Economic Geology, 1983, 78(3): 535-542.

[19] LI Geng-lai, CHEN Hong-mei. Gas adiabatic index calculation method［J］. Oil and Gas Field Surface Engineering, 1997, (5): 15-16.

[20] INOGAMOV N A, ZHAKHOVSKII V V, KHOKHLOV V A. Jet formation in spallation of metal film from substrate under action of femtosecond laser pulse［J］. Journal of Experimental & Theoretical Physics, 2015, 120(1): 15-48.

[21] BRENNEN CE. Cavitation and bubble dyanmics［M］. Oxford University Press, 1995.

[22] YANG G W. Laser ablation in liquids: applications in the synthesis of nanocrystals［J］.Cheminform, 2007, 38(38): 648-698.