[2] NORRIS A, SAAFI M, ROMINE P. Temperature and moisture monitoring in concrete structures using embedded nanotechnology/microelectromechanical systems (MEMS) sensors[J]. Construction and Building Materials, 2008, 22(2): 111-120.

[6] NADEEM A, MEMON S A, LO T Y. The performance of fly ash and Metakaolin concrete at elevated temperatures[J]. Construction and Building Materials, 2014, 62: 67-76.

[9] AN M Z, HUANG H F, WANG Y, et al. Effect of thermal cycling on the properties of high-performance concrete: microstructure and mechanism[J]. Construction and Building Materials, 2020, 243: 118310.

[10] SHOKRIEH M M, HEIDARI-RARANI M, SHAKOURI M, et al. Effects of thermal cycles on mechanical properties of an optimized polymer concrete[J]. Construction and Building Materials, 2011, 25(8): 3540-3549.

[11] AL-TAYYIB A J, BALUCH M H, SHARIF A F M, et al. The effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries[J]. Cement and Concrete Research, 1989, 19(1): 131-142.

[12] WALKER S, BLOEM D L, MULLEN W G. Effects of temperature changes on concrete as influenced by aggregates[J]. American Concrete Institute, 1952, 48(4): 661-679.

[14] ZHANG G H, LI Z L, ZHANG L F, et al. Experimental research on drying control condition with minimal effect on concrete strength[J]. Construction and Building Materials, 2017, 135: 194-202.

[16] KANELLOPOULOS A, FARHAT F A, NICOLAIDES D, et al. Mechanical and fracture properties of cement-based bi-materials after thermal cycling[J]. Cement and Concrete Research, 2009, 39(11): 1087-1094.

[18] DU X Q, LI Z L, HAN J S, et.al. Effect of different humidity-controlling modes on microstructure and compressive behavior of ordinary concrete[J]. Journal of Materials in Civil Engineering, 2020, 32(1): 04019337.

[20] TANG S W, HUANG J S, DUAN L, et al. A review on fractal footprint of cement-based materials[J]. Powder Technology, 2020, 370: 237-250.