• Optics and Precision Engineering
  • Vol. 22, Issue 1, 193 (2014)
HONG Xiao-bin1,*, LI Nian-zhi1, YIN Wen-wei1, KONG Qing-zhao2, and LIU Gui-xiong1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3788/ope.20142201.0193 Cite this Article
    HONG Xiao-bin, LI Nian-zhi, YIN Wen-wei, KONG Qing-zhao, LIU Gui-xiong. Monitoring of internal temperature of vehicle power battery based on electrical resistance tomography[J]. Optics and Precision Engineering, 2014, 22(1): 193 Copy Citation Text show less
    References

    [1] KHARE N, GOVIL R. Modeling automotive battery diagnostics [J]. Power Electronics Technology, 2008, 34(3): 36-41.

    [2] SONG Y H, YANG Y X, HU Z CH. Present status and development trend of batteries for electric vehicles [J]. Dianwang Jishu/Power System Technology,2011,35(4): 1-7.

    [3] HUANG H J. Study on safety of lithium-ion battery [J]. Shang Hai: Graduate University of Chinese Academy of Sciences,2005. (in Chinese)

    [4] CHEN Y F,EVANS W,SCHARRER G. Calculation of temperature rise in lithium polymer batteries of Sandia conceptual designs during USABC Dynamic Stress Test [J]. Journal of Power Sources,1998, 70(2): 240-246.

    [5] HANDE A. Internal battery temperature estimation using series battery resistance measurements during cold temperatures [J]. Journal of Power Sources,2006,158(2): 1039-1046.

    [6] LI S G,ZHANG CH N,XIA,X M,Temperature control system of electric vehicle battery pack based on DS18B20 [J]. Electric Detection,2008,27(24): 54-56. (in Chinese)

    [7] YANG Y L,ZHANG X, HE P X,et al.. Test system of temperature field for Ni-MH power battery in hybrid vehicle [J]. Sichuan Ordnance Journal,2008,29(4): 112-114. (in Chinese)

    [8] WANG Y Q,WANG Q G. Measurement circuit and simulation of battery temperature for electric passenger car [J]. Bus Technology and Research,2010,4: 37-38. (in Chinese)

    [9] KARHUNEN K,SEPPNEN A.LEHIKOINEN A,et al.. Electrical resistance tomography imaging of concrete[J]. Cement and Concrete Research,2010,40(1): 137-145.

    [10] RODGERS T L,SIPERSTEIN F R,MANN R,et al.. Comparison of a networks-of-zones fluid mixing model for a baffled stirred vessel with three-dimensional electrical resistance tomography[J]. Measurement Science and Technology,2011,22(10): 1-12.

    [11] ZHU Y,WANG ZH CH. Measurement of soil resistivity based on FFT DC component [J].Opt. Precision Eng.,2013,21(1): 115-123. (in Chinese)

    [12] CHEN Y,GAO B Q,ZHANG L X,et al.. Image reconstruction based on weighted SVD truncation conjugate gradient algorithm for electrical capacitance tomography [J]. Opt. Precision Eng.,2010,18(3): 701-707. (in Chinese)

    [13] WU X J,HUANG G X,WANG J W.Application of particle filtering algorithm to image reconstruction of ECT[J]. Opt. Precision Eng.,2012,20(8): 1824-1830. (in Chinese)

    [14] HONG X B,LIU G X. Double layer compression method based on PLSR-SBR for IP mode measurement & control system [J]. Opt. Precision Eng.,2010,18(10): 2280-2287.(in Chinese)

    HONG Xiao-bin, LI Nian-zhi, YIN Wen-wei, KONG Qing-zhao, LIU Gui-xiong. Monitoring of internal temperature of vehicle power battery based on electrical resistance tomography[J]. Optics and Precision Engineering, 2014, 22(1): 193
    Download Citation