Research of Al2O3+13%TiO2 Ceramic Nanoparticles Growth during Laser Cladding Process Based on Brook′s Theory

Wang Dongsheng; Tian Zongjun; Wang Jingwen; Duan Zongyin; Shen Lida; Huang Yinhui

doi:10.3788/cjl201138.0903003

[1] R. S. Sun, Y. W. Lei, W. Niu. Laser clad TiC reinforced NiCrBSi composite coatings on Ti-6Al-4V alloy using a CW CO2 laser［J］. Surf. Coat. Technol., 2009, 203(10-11): 1395～1399

[2] Liu Xiubo, Shi Shihong, Fu Geyan et al.. Ni-Cr-C-CaF2 composite laser cladding on γ-TiAl intermetallic alloy［J］. Chinese J. Lasers, 2009, 36(6): 1591～1594

[3] Ma Xingwei, Jin Zhuji, Gao Yuzhou. Effect of rare earth La2O3 on microstructure and tribological property of laser cladding FeAl based alloys and TiC reinforced composites coatings［J］. Chinese J. Lasers, 2010, 37(1): 271～276

[4] Xu Binshi, Ou Zhongwen, Ma Shining et al.. Nano-surface-engineering［J］. China Mechanical Engineering, 2000, 11(6): 707～712

[5] E. Yarrapareddy, R. Kovacevic. Synthesis and characterization of laser-based direct metal deposited nano-particles reinforced surface coatings for industrial slurry erosion applications［J］. Surf. Coat. Technol., 2008, 202(10): 1951～1965

[6] S. H. Zhang, M. X. Li, T. Y. Cho et al.. Laser clad Ni-base alloy added nano- and micron-size CeO2 composites［J］. Opt. Laser Technol., 2008, 40(5): 716～722

[7] H. Y. Wang, D. W. Zuo, Y. L. Sun et al.. Microstructure of nanometer Al2O3 dispersion strengthened Ni-based high-temperature protective coatings by laser cladding［J］. Transac. Nonferr. Metal. Soc. China, 2009, 19(3): 586～591

[8] Wang Dongsheng, Tian Zongjun, Shen Lida et al.. Research development of nanostructured coatings prepared by laser cladding［J］. Chinese J. Lasers, 2008, 35(11): 1698～1709

[9] Li Yaozhong, Wang Cunshan, Li Ting et al.. Influence of nano-SiC particle on microstructure and properties of laser clad NiFeBSi alloy coating［J］. Chinese J. Lasers, 2010, 37(5): 1356～1360

[10] Zhang Lide, Xie Sishen. Nano-Material and Nano-Structure［M］. Beijing: Chemical Industry Press, 2005

[11] R. J. Brook. Pore-grain boundary interactions and grain growth［J］. J. Am. Ceram. Soc., 1976, 52(1): 56～57

[12] Li Wei, Gao Lian, Gui Linhua et al.. Analysis of the grain growth of nano Y-TZP materials［J］. J. Inorganic Materials, 2000, 15(3): 536～540

[13] Wang Dongsheng, Tian Zongjun, Shen Lida et al.. Microstructures and formation mechanism of plasma-sprayed nanostructured composite ceramic coatings［J］. The Chinese Journal of Nonferrous Metals, 2009, 19(1): 77～83

[14] Xi Mingzhe, Yu Gang. Numerical simulation for transient temperature field of 3D moving laser molten pool［J］. Chinese J. Lasers, 2004, 31(12): 1527～1532

[15] Wang Dongsheng, Tian Zongjun, Shen Lida et al.. Numerical simulation on the temperature field and microstructure analysis of laser remelting composite ceramic coating on TiAl alloy surface［J］. Chinese J. Lasers, 2009, 36(1): 224～230

[16] Li Jiguang, Sun Xudong, Wang Yarong et al.. Sintering kinetics of nanocrystalline α-Al2O3 powder［J］. Acta Metallurgica Sinica, 1998, 34(2): 195～199

[17] D. S. Horn, G. L. Messing. Anisotropic grain growth in TiO2-doped alumina［J］. Mat. Sci. Engng. A-Struct., 1995, 195: 169～178

[18] Wang Dongsheng, Tian Zongjun, Shen Lida et al.. Microstructure and properties of laser-remelted nanostructured Al2O3-13%TiO2 ceramic coatings［J］. Rare Metal Materials and Engineering, 2009, 38(9): 1542～1546