Research of Microstructure and Mechanical Properties of Laser Tailor-Welded Blank of Cold Rolled Multi-Phase Steel and HSLA

Zhang Fan; Li Fang; Hua Xueming; Wang Shien; Chu Weidong; Wang Daming

doi:10.3788/cjl201542.0903010

[1] Li Shuhui, Lin Zhongqin, Ni Jun, et al.. Current development and trends of the tailored blank application in auto-body stamping[J]. Chinese J Mechanical Engineering, 2002, 38(2): 1-7.

[2] Hernandez B, Hugo V. Effects of Martensite Tempering on HAZ-Softening and Tensile Properties of Resistance Spot Welded Dual-Phase Steels[M]. Canada: Mechanical Engineering Press, 2010.

[3] Nayak S S, Zhou Y, Hernandez V H B, et al.. Resistance spot welding of dual-phase steels: Heat affected zone softening and tensile properties[C]. Trenda in welding Research, Proceedings of the 9th International Conference, 2012: 641-649.

[4] Xia M, Sreenivasan N, Lawson S, et al.. A comparative study of formability of diode laser welds in DP980 and HSLA steels[J]. Journal of Engineering Materials and Technology, 2007, 129(3): 446-452.

[5] Sreenivasan N, Xia M, Lawson S, et al.. Effect of laser welding on formability of DP980 steel[J]. Journal of Engineering Materials and Technology, 2008, 130(4): 041004.

[6] Panda S K, Hernandez V H B, Kuntz M L, et al.. Formability analysis of diode-laser-welded tailored blanks of advanced highstrength steel sheets[J]. Metallurgical and Materials Transactions A, 2009, 40(8): 1955-1967.

[7] Yu Qun, Chen Kai, Xiao Rongshi. Microstructure and properties of ultra- high strength steel DP780 welded by DISC laser[J]. Applied Laser, 2010, 30(3): 001.

[8] Dong Qifeng, Yan Cuo, Liao Xianyu. Experimental investigation on laser welding dissimilar materials between galvanized steel and carbon steel plates[J]. Laser Technology, 2012, 36(5): 665-669.

[9] Peas P, Henrique M, Miranda R M, et al.. Laser welding of low-thickness zinc-coated and uncoated carbon steel sheets[J]. Optical and Quantum Electronics, 1995, 27(12): 1193-1201.

[10] Sreenivasan N, Xia M, Lawson S, et al.. Effect of laser welding on formability of DP980 steel[J]. Journal of Engineering Materials and Technology, 2008, 130(4): 041004.

[11] Biro E. Heat-Affected Zone Softening Kinetics in Dual-Phase and Martensitic Steels[D]. Hamilton: McMaster university, 2014.

[12] Han Kun, Zeng Weiming, Zhang Mei, et al.. Welding Ability of Multiphase Steel CP800[J]. Hot Working Technology, 2011, 40(7): 31-33.

[13] Chan S M, Chan L C, Lee T C. Tailor-welded blanks of different thickness ratios effects on forming limit diagrams[J]. Journal of Materials Processing Technology, 2003, 132(1): 95-101.

[14] Mei L, Chen G, Jin X, et al.. Research on laser welding of high-strength galvanized automobile steel sheets[J]. Optics and Lasers in Engineering, 2009, 47(11): 1117-1124.

[15] Sharma R S. Weldability of advanced high strength steels using an Yb∶YAG disk laser[J]. Journal of Manerials Processing Technology, 2011, 211(11): 1888-1897.

[16] Hernandez V H B, Nayak S S, Zhou Y. Tempering of martensite in dual- phase steels and its effects on softening behavior[J]. Metallurgical and Materials Transactions A, 2011, 42(10): 3115-3129.