[1] LI Y. Progress in the research of metal materials with gradient structure ［J］. Material Progress in China, 2016, 35(9): 658-665. (in Chinese)
[2] CPM S A, VARGHESE B, BABY A. A review on functionally graded materials ［J］. The International Journal of Engineering and Science, 2014, 3: 90-101.
[3] YANG H, LAVERNIA E J, SCHOENUNG J M. Novel fabrication of bulk Al with gradient grain size distributions via powder metallurgy ［J］. Philosophical Magazine Letters, 2015, 95(3): 177-186.
[4] XI M ZH, ZHANG Y ZH, TU Y, et al.. 316L Stainless steel/Ni-based alloy/Ti6Al4V gradient materials prepared by laser rapid forming process ［J］. Acta Metallurgica Sinica, 2008, 44(7): 826-830.(in Chinese)
[5] LI S J, ZHAO S, HOU W T, et al.. Functionally graded Ti-6Al-4V meshes with high strength and energy absorption ［J］. Advanced Engineering Materials. 2016, 18(1): 34-38.
[6] QIAN T T, LIU D, TIAN X J, et al..Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process ［J］.Transactions of Nonferrous Metals Society of China, 2014, 24(9): 2729-2736.
[7] LOH G H, PEI E, HARRISON D, et al.. An overview of functionally graded additive manufacturing ［J］. Additive Manufacturing, 2018, 23: 34-44.
[8] YANG Y Q, CHEN J, SONG CH H, et al.. Current status and progress on technology of selective laser melting of metal parts ［J］. Laser & Optoelectronics Progress, 2018, 55(1): 011401.(in Chinese)
[9] GOKULDOSS P K, VIJAY KESHAV KOLLA S S, ECKERT J. Additive manufacturing processes: Selective laser melting, electron beam melting and binder jetting-selection guidelines ［J］. Materials, 2017, 10(6): 672.
[10] LEWANDOWSKI J J, SEIFI M. Metal additive manufacturing: a review of mechanical properties ［J］. Annual Review of Materials Research, 2016, 46(11): 151-186.
[11] CHEN J, YANG Y Q, SONG C H, et al.. Interfacial microstructure and mechanical properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting ［J］. Materials Science and Engineering A, 2019, 752: 75-85.
[12] ZHANG M K, YANG Y Q, WANG D, et al.. Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting ［J］. Materials Science and Engineering A, 2018, 736: 288-297.
[13] FOUSOV M, VOJTCH D, KUBSEK J, et al.. Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process ［J］. Journal of the Mechanical Behavior of Biomedical Materials, 2017, 69: 368-376.
[14] CHOY S Y, SUN C N, LEONG K F, et al.. Compressive properties of functionally graded lattice structures manufactured by selective laser melting ［J］. Materials & Design, 2017, 131: 112-120.
[15] HAN C J, LI Y, WANG Q, et al.. Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants ［J］. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 80: 119-127.
[16] DEMIR A G, PREVITALI B. Multi-material selective laser melting of Fe/Al-12Si components ［J］. Manufacturing Letters, 2017, 11: 8-11.
[17] WEI C, SUN Z, CHEN Q, et al.. Additive manufacturing of horizontal and 3D functionally graded 316L/Cu10Sn components via multiple material selective laser melting ［J］. Journal of Manufacturing Science and Engineering-transactions of the Asme, 2019, 141(8): 14.
[19] WEI C, LI L, ZHANG X J, et al.. 3D printing of multiple metallic materials via modified selective laser melting ［J］. CIRP Anmals, 2018, 67: 245-248.
[20] WU W H, LIU F. A method and device of supplying and spreading powder for 3D printing of multi-material parts: CN, ZL2016101729906 ［P］. 2016-06-01. (in Chinese)
[21] WU W H, YANG Y Q, WANG D, et al.. A powder mixing and uniform distribution method and device for 3D printing of gradient material parts: CN, ZL108213425 B ［P］. 2019-02-15. (in Chinese)
[22] CHEN Y.Research on Functional Gradient Material Parts CAD Modeling and Deposition Path Planning ［D］.Wuhan: Huazhong University of Science & Technology, 2008. (in Chinese)
[23] SIU Y K, TAN S T. ‘Source-based’ heterogeneous solid modeling ［J］. Computer-Aided Design, 2002, 34(1): 41-55.
