[1] Liang Guoli, Yang Shanwu, Wu Huibin. Microstructure and mechanical performances of CGHAZ for oil tank steel during high heat input welding[J]. Rare Metals, 2013, 32(2): 129-133.
[3] Li Yang, Liu Hanwu, Du Yunhui, et al.. Applications and developments of AHSS in automible industry[J]. Materials Review, 2011, 25(7): 101-109.
[4] Li Xiaofeng, Song Haoyuan, Zhang Youwei, et al.. Discussion on microstructure and properties of laser welding for high strength low alloysteel[J]. Physics Examination and Testing, 2015, 33(1): 1-5.
[5] S Katayama, Y Kawahito. Interpretation of laser weld penetration and welding phenomena[J]. Chinese J Lasers, 2009, 36(12): 3160-3166.
[6] Jing Cainian, Fan Jichao, Wang Conglei, et al.. Characterization and formation mechanism of the weld interface of TRIP 590 steel laser welding[J]. Chinese J Lasers, 2015, 42(4): 0403004.
[7] Wang Wenquan, Ma Kai, Sun Daqian, et al.. The microstructure and properties of weld joint of 600 MPa DP steel by laser welding[J].Transactions of the China Welding Institution, 2010, 31(9): 25-28.
[8] R Miranda, A Costa, L Quintino, et al.. Characterization of fiber laser welds in X100 pipeline steel[J]. Materials and Design, 2009, 30 (7): 2701-2707.
[9] Zhang Xudong, Chen Wuzhu, Wang Cheng, et al.. Microstructures and toughness of weld metal of ultrafine grained ferritic steel by laser welding[J]. Journal of Materials Science, 2004, 20(6): 755-759.
[10] Lan Liangyun, Qiu Chunlin, Zhao Dewen, et al.. Microstructural characters and toughness of different sub-regions in the welding heat affected zone of low carbon bainitic steel[J]. Acta Metallurgica Sinica, 2011, 47(8): 1046-1054.
[11] Liu Huijie. Welding Metallurgy and Welding[M]. Haerbin: Machinery Industry Press, 2007: 105-126.
[12] Wang Haisheng, Wang Wei, Wang Xiaonan, et al.. Effect of heat input on weld joints microstructure and nano mechanical properties of nano precipitation hardening steel[J]. Chinese J Lasers, 2015, 42(7): 0703004.
[13] C Devadas, I V Samarasekera, E B Hawbolt. The thermal and metallurgical state of steel strip during hot rolling: Part1, Characterization of heat transfer[J]. Metallurgical Transactions A, 1991, 21(2): 307-319.
[14] Zheng Lei, Yuan Zexi, Song Shenhua, et al.. Austenite grain growth in heat affected zone of Zr-Ti bearing microalloyed steel[J]. Journal of Iron and Steel Research, International, 2012, 19(2): 73-78.
[15] Zhang Xiaoning, Jing Yi, Yu Yan, et al.. Study on microstructure evolution and properties of SA738Gr.B steel with different austenitizing holding time and peak temperature[J]. Hot Working Technology, 2013, 42(7): 22-29.
[16] Ye Hong, Wu Haidong, Zhang Xiaobin. Principle and Process of Metal Heat Treatment[M]. Beijing: Chemical Industry Press, 2011: 56-72.
[17] Zhang Min, Wang Xiaonan, Zhu Guangjiang, et al.. Effect of laser welding process parameters on microstructure and mechanical properties on butt joint of new hot-rolled nano-scale precipitation-strengthened steel[J]. Acta Metallurgica Sinica, 2014, 27(3): 521-529.
[18] Shen Baoluo, Li Li, Yue Changlin. Summarization of relationship between tensile strength and hardness of iron-steel materials[J]. Modern Cast Iron, 2012, 32(1): 93-96.
[19] Wang Xiaonan. Precipitation Behavior Study and Control on Microstructure and Properties of Hot-Rolled Ultra-High Strength Automobile Strip[D]. Shenyang: Northeastern University, 2011: 108-129.
[20] Zhang Xiaoli, Zhuang Chuanjing, Ji Lingkang, et al.. Effective particle size of high grade pipeline steels[J]. Materials For Mechanical Engineering, 2007, 31(3): 4-8.
[21] Wang Xiaonan, Chen Changjun, Wang Haisheng, et al.. Microstructure formation and precipitation in laser welding of microalloyed CMnsteel[J]. Journal of Materials Processing Technology, 2015, 226(5): 106-114.
[22] Wu Wei, Gao Hongming, Cheng Guangfu, et al.. Effect of high temperature residence time on microstructure of fine grained titanium alloy[J]. Transactions of The China Welding Institution, 2009, 30(9): 5-9.
