[1] MEHTA P K, MONTERIRO P. Concrete: microstructure, properties, and materials［M］. Upper Saddle River: Prentice-Hall, 2013.
[3] LI V C, MISHRA D K, WU H C. Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites［J］. Materials and Structures, 1995, 28(10): 586-595.
[4] LI V C, WU C, WANG S X, et al. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)［J］. ACI Materials Journal, 2002, 99(5): 463-472.
[5] LI V C, OBLA K H. Effect of fiber length variation on tensile properties of carbon-fiber cement composites［J］. Composites Engineering, 1994, 4(9): 947-964.
[6] LI V C, WU H C, MAALEJ M, et al. Tensile behavior of cement-based composites with random discontinuous steel fibers［J］. Journal of the American Ceramic Society, 1996, 79(1): 74-78.
[10] ERDOGAN F, SIH G C. On the crack extension in plates under plane loading and transverse shear［J］. Journal of Basic Engineering, 1963, 85(4): 519-525.
[12] HUSSAIN M A. Strain energy release rate for a crack under combined mode Ⅰ and mode Ⅱ［J］. Fracture Analysis, 1974(9): 2-28.
[13] SIH G C. Strain-energy-density factor applied to mixed mode crack problems［J］. International Journal of Fracture, 1974, 10(3): 305-321.
[19] LAMBROPOULOS J C. Shear, shape and orientation effects in transformation toughening［J］. International Journal of Solids and Structures, 1986, 22(10): 1083-1106.
[20] LI H Y, YANG J D, LI Z H. An approximate solution for the plane stress mode Ⅰ crack interacting with an inclusion of arbitrary shape［J］. Engineering Fracture Mechanics, 2014, 116: 190-196.
[21] YANG J, LI H, LI Z. Approximate analytical solution for plane stress mode Ⅱ crack interacting with an inclusion of any shape［J］. European Journal of Mechanics-A/Solids, 2015, 49: 293-298.
