[1] Gao C F, Xu Y, Wang J et al. Partial discharge online monitoring and localization for critical air gaps among SiC-based medium-voltage converter prototype[J]. IEEE Transactions on Power Electronics, 34, 11725-11735(2019).

[2] Wang X H, Zhang W C, Zhao H et al. Impact of liquid insulation on characteristic parameters of fiber Fabry-Perot partial discharge induced ultrasound sensor[J]. Acta Optica Sinica, 38, 0406005(2018).

[3] Trendafilova I, Cartmell M P, Ostachowicz W. Vibration-based damage detection in an aircraft wing scaled model using principal component analysis and pattern recognition[J]. Journal of Sound and Vibration, 313, 560-566(2008).

[4] Shi J M, Zheng D, Pan W et al. Fiber grating ultrasonic sensor based on coupling cone structure and its application in nondestructive detection[J]. Acta Optica Sinica, 39, 1206004(2019).

[5] Zhang Y L, Liang Y Z, Jin L et al. 125 μm fiber based all-optical ultrasound probes for pulse-echo imaging[J]. Chinese Optics Letters, 17, 070604(2019). http://www.opticsjournal.net/Articles/Abstract?aid=OJe634f952b1e69988

[6] Jung Y, Kwak J H, Lee Y H et al. Development of a multi-channel piezoelectric acoustic sensor based on an artificial basilar membrane[J]. Sensors, 14, 117-128(2013).

[7] Wei L, Yu L L, Jiang D Z et al. Fiber Bragg grating accelerometer based on diaphragm and diamond structure[J]. Chinese Journal of Lasers, 46, 0910003(2019).

[8] Li W, Zhang Y J. Enhanced phase sensitive optical time-domain reflectometer vibration sensing system based on weak grating array[J]. Chinese Journal of Lasers, 45, 0810001(2018).

[9] Islam M R, Ali M M, Lai M H et al. Chronology of Fabry-Perot interferometer fiber-optic sensors and their applications: a review[J]. Sensors, 14, 7451-7488(2014).

[10] Chen W M, Lei X H, Zhang W et al. Recent progress of optical fiber Fabry-Perot sensors[J]. Acta Optica Sinica, 38, 0328010(2018).

[11] Dong B, Han M, Wang A B. Two-wavelength quadrature multipoint detection of partial discharge in power transformers using fiber Fabry-Perot acoustic sensors[J]. Proceedings of SPIE, 8370, 83700K(2012).

[12] Liu B, Lin J, Liu H et al. Diaphragm based long cavity Fabry-Perot fiber acoustic sensor using phase generated carrier[J]. Optics Communications, 382, 514-518(2017).

[13] Ni W J, Lu P, Fu X et al. Ultrathin graphene diaphragm-based extrinsic Fabry-Perot interferometer for ultra-wideband fiber optic acoustic sensing[J]. Optics Express, 26, 20758-20767(2018).

[14] Han M, Wang X W, Xu J C et al. Diaphragm-based extrinsic Fabry-Perot interferometric optical fiber sensor for acoustic wave detection under high background pressure[J]. Optical Engineering, 44, 060506(2005).

[15] Mao X F, Yuan S Z, Zheng P C et al. Stabilized fiber-optic Fabry-Perot acoustic sensor based on improved wavelength tuning technique[J]. Journal of Lightwave Technology, 35, 2311-2314(2017).

[16] Liu B, Zhou H, Liu L et al. An optical fiber Fabry-Perot microphone based on corrugated silver diaphragm[J]. IEEE Transactions on Instrumentation and Measurement, 67, 1994-2000(2018).

[18] Fang L, Chen T, Li R Y et al. Application of embedded fiber Bragg grating (FBG) sensors in monitoring health to 3D printing structures[J]. IEEE Sensors Journal, 16, 6604-6610(2016).

[19] Chen Z, Zhang L, Liu H H et al. 3D printing technique-improved phase-sensitive OTDR for breakdown discharge detection of gas-insulated switchgear[J]. Sensors, 20, 1045(2020).

[20] Yao M, Wu J S, Zhang A P et al. Optically 3-D μ-printed ferrule-top polymer suspended-mirror devices[J]. IEEE Sensors Journal, 17, 7257-7261(2017).

[21] Yao M, Ouyang X, Wu J S et al. Optical fiber-tip sensors based on in situ μ-printed polymer suspended-microbeams[J]. Sensors, 18, 1825(2018).

[22] Wu J S, Yao M, Xiong F et al. Optical fiber-tip Fabry-Pérot interferometric pressure sensor based on an in situ μ-printed air cavity[J]. Journal of Lightwave Technology, 36, 3618-3623(2018).

[23] Wei H M, Chen M Q, Krishnaswamy S. Three-dimensional-printed Fabry-Perot interferometer on an optical fiber tip for a gas pressure sensor[J]. Applied Optics, 59, 2173-2178(2020).

[24] Lammel-Lindemann J, Dourado I A, Shanklin J et al. Photocrosslinking-based 3D printing of unsaturated polyesters from isosorbide: a new material for resorbable medical devices[J]. Bioprinting, 18, e00062(2020).

[25] Mu Q Y, Wang L, Dunn C K et al. Digital light processing 3D printing of conductive complex structures[J]. Additive Manufacturing, 18, 74-83(2017).

[26] Yin X Y, Zhang Y, Cai X B et al. 3D printing of ionic conductors for high-sensitivity wearable sensors[J]. Materials Horizons, 6, 767-780(2019).

[27] Swargiary K, Jarutatsanangkoon P, Suwanich P et al. Single-step 3D-printed integrated optical system and its implementation for a sensing application using digital light processing technology[J]. Applied Optics, 59, 122-128(2020).

[28] Kauppinen J, Wilcken K, Kauppinen I et al. High sensitivity in gas analysis with photoacoustic detection[J]. Microchemical Journal, 76, 151-159(2004).

[29] Galluzzi M, Biswas C S, Wu Y H et al. Space-resolved quantitative mechanical measurements of soft and supersoft materials by atomic force microscopy[J]. NPG Asia Materials, 8, e327(2016).

[30] Shen S, Liu H H, Pang F F et al. Fiber-optic water pressure sensor fabricated by a 3D printing technique[J]. Proceedings of SPIE, 11191, 111910P(2019).

[31] Gentry S P, Halloran J W. Absorption effects in photopolymerized ceramic suspensions[J]. Journal of the European Ceramic Society, 33, 1989-1994(2013).

[32] Bai Y, Yan F P, Liu S et al. All fiber Fabry-Pérot interferometer for high-sensitive micro-displacement sensing[J]. Optical and Quantum Electronics, 48, 206(2016).

[33] Vaidya N, Solgaard O. 3D printed optics with nanometer scale surface roughness[J]. Microsystems & Nanoengineering, 4, 18(2018).