Analysis on the FBG Distributed Non-uniform Strain Reconstruction Precision

SHEN Xiao-yan; HAN Ya; ZHANG Liang-yue; LI Dong-sheng; SUN Zhi-peng

doi:10.3788/gzxb20164512.1206003

[1] HU Jun, YANG Yuan-hong, LIU Xue-jing. Gap fiber Bragg grating based micro-gap and temperature simultaneous measurement technology［J］. Chinese Journal of Lasers, 2014, 44(11): 1108003.

[2] WU Jun, CHEN Wei-Min, SHU Yeu-jie, et al. Embedded strain homogenized FBG sensor for smart cables［J］. Acta Photonica Sinica, 2015, 44(7): 0706002.

[3] ZHANG Ji-Jun, WU Zu-Tang, PAN Guo-feng, et al. Design of optical fiber grating based high-precision and low-frequency vibration sensor［J］. Acta Photonica Sinica, 2014, 43(S1): 0128001.

[4] KANG D, PARK S, HONG C, et al. The signal characteristics of reflected spectra of fiber Bragg grating sensors with strain gradient sand grating lengths［J］. NDT and E International, 2005, 38(8): 712-718.

[5] LONG J, WEI G Z, HAO Z. An embedded FBG sensor for simultaneous measurement of stress and temperature［J］. IEEE Photonics Technology Letters, 2006, 18(1): 154-156.

[6] LING H Y, LAU K T, CHENG L, et al. Embedded fiber Bragg grating sensors for non-uniform strain sensing in composite structures ［J］. Measurement Science & Technology, 2005, 16(12): 2415-2424.

[7] GILL A, PETERS K, STUDER M. Genetic algorithm for the reconstruction of Bragg grating sensor strain profiles［J］. Measurement Science and Technology, 2004, 15(9): 877-1884.

[8] ZHANG Rong-xiang, ZHENG Shi-jie, XIA Yan-jun. The reconstruction of the of non-uniform strain profile by using chaos genetic algorithm［J］. Journal of Optoelectronics·Laser, 2009, 20(8): 1058-1062.

[9] XIA Yan-jun, ZHENG Shi-jie. Non-uniform strain profile reconstruction of FBG via genetic programming［J］. Journal of Optoelectronics·Laser, 2010, 21(8): 1141-1145.

[10] WANG Jing, WANG Zheng-fang. Stud of FBG strain distribution reconstruction based on improved genetic algorithm dual constrain［J］. Chinese Journal of Lasers, 2012, 39(3): 126-132.

[11] ZHANG Gui-zhen, WANG Hong-tao. Reconstruction of non-uniform strain profile for fiber bragg grating using dynamic particle swarm optimization algorithm［J］. Piezoelectrics &Acoustooptics, 2013, 35(2): 174-179.

[12] GAO Zhi-peng, YU Zhen-hong, XING Li-hua. A novel method for reconstructing strongly reflecting fiber bragg gratings［J］. Acta Optica Sinica, 2006, 26(7): 991-996.

[13] MAHANTA D K. Design of uniform fiber bragg grating using transfer matrix method［J］. International Journal of Computational Engineering Research, 2013, 3(5): 8-13.

[14] QIAN Jing-ren. Coupled-mode theory and its application to fiber optics［J］. Acta Optica Sinica, 2009, 29(5): 1188-1192.

[15] XIE Hai-he, LIN Zhen-heng, YAN Huang-ping, et al. Fiber-Bragg grating analyzed by transfer theory of membrane layer［J］. Acta Photonica Sinica, 2015, 44(11): 1106003.

[16] ZHANG Zi-jia, WANG Chang-min. Investigation of the transfer matrix of the fiber gratings［J］. Acta Photonica Sinica, 2007, 06(36): 1073-1077.

[17] SHEN Xiao-yan, ZHANG Liang-yue, SUN Jie. Improved layer peeling algorithm to realize FBG non-uniform strain sense demodulation［J］. Infrared and Laser Engineering, 2015, 44(12): 3734-3739.

[18] BOTSIS J, HUMBERT L, COLPO F, et al. Embedded fiber Bragg grating sensor for internal strain measurements in polymeric materials［J］. Optics and Lasers in Engineering, 2005, 43(3): 491-510.

[19] CORIC D, LIMBERGER H G, SALATHERP. Distributed measurements of fiber birefringence and diametric load using optical low-coherence reflectometry and fiber gratings［J］. Optical Society of America, 2006, 14(24): 11804-11813.

[20] SKAAR J, WANG L G, ERDOGAN T. On the synthesis of fiber Bragg gratings by layer peeling［J］. IEEE Journal of Quantum Electronics, 2007, 37(2): 165-173.

[21] RUAN Yi, PEI Li, HAO Chun-hui, et al. Research on V-I transfer matrix method for analyzing fiber gratings［J］. Acta Optica Sinica, 2009, 12(29): 3267-3271.