[1] Raja Kountanya, Vijay Jagdale. Frictionless elastic contact of crowned roller: Approximate analytical calculation of compliance and contact area［J］. Journal of Engineering Tribology, 2015,229(10) : 1206-1213.
[2] JUAN X U, NIU Q, HUAMING Q I, et al.. A research on the contact stress of roller bearing based on crowning analysis［J］. Computer Aided Drafting Design & Manufacturing, 2012, 22(2): 55-58.
[3] WEI Z, XU W, TAO B. Crown Shaping Technique of Bearing Raceway by Electrochemical Mechanical Machining［J］. International Journal of Electrochemical Science, 2013, 8(2): 2238-2253.
[4] Bogdan Warda , Agnieszka Chudzik. Effect of ring misalignment on the fatigue life of the radial cylindrical roller bearing［J］. International Journal of Mechanical Sciences,2016,111-112(6): 1-11.
[5] XIA X T, DONG S J, SUN L M. Effects of Convexity Offset of Rollers on Contact Stress of Tapered Roller Bearings［J］. Bearing, 2015(9): 4-6. (in Chinese)
[6] LIU Z T, YANG J X, ZHAO B. Study on Roundness Error Evaluation with Least-Squares Method Based on Nonlinear Optimization［J］. Advanced Materials Research, 2013, 765-767: 755-758.
[7] ZHANG Y Q, SU A, LIU H B, et al.. Pose estimation based on multiple line hypothesis and iteratively reweighted least squares［J］. Optics and Precision Engineering, 2015,23(06): 1722-1731. (in Chinese)
[8] GU T, LIN S, FANG B, et al.. An improved total least square calibration method for straightness error of coordinate measuring machine［J］. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2016, 230(9).
[9] HUANG F G, CUI C P, SUN L M. Comparison of evaluating precision of straightness error between least square method and least envelope zone method［J］. Opt. Precision Eng., 2007(06): 889-893. (in Chinese)
[10] MU ZH Y,AI H,FAN XH,et al..Inference fringe image registration using total least square method［J］. Chinese Optics, 2016, 9(6): 625-632. (in Chinese)
[11] BENKO G, KO’S G, VARADY T, et al.. Constrained Fitting in Revers Engineering［J］. Computer aided Geomeerric Design, 2002,19(3): 173-205.
[12] LIU Y F, KE Y L. Slicing Data Processing And Global Optimization of Feature Curve in Reverse Engineering ［J］. Chinese Journal of Mechanical Engineering, 2006, 42(3): 124-129. (in Chinese)
[13] TIAN L D, ZHAO J K, ZHOU Y, et al.. Test Method of Angle Error of Limited Rotation Axis System.［J］. Acta Photonica Sinica, 2017, 46(11): 131-137. (in Chinese)
[14] QIANG H B, WU Q, WANG J H. Evaluation Method on Roundness of Arc Contours and Analysis of Error［J］. Tool Engineering, 2012, 46(3): 74-76. (in Chinese)
