[1] BAI Y, ZHANG F, LI L X, et al.. Manufacture of silicon modification layer on Silicon Carbide surface by magnetorheological finishing［J］.Acta Optica Sinica, 2015, 35(3): 308-315. (in Chinese)

[2] ZHANG F. Computer-controlled chemical mechanical polishing of silicon modification layer on aspheric silicon carbide surface［J］. Opt. Precision Eng., 2013, 21(12): 3015-3020. (in Chinese)

[3] TANG W, DENG W J, LI R G, et al.. Correction of removal function of ion beam figuring highly steep off-axis asphere［J］. Opt. Precision Eng., 2015, 23(6): 1572-1579. (in Chinese)

[4] PAN X, MA ZH B, GAO P, et al.. Polishing diamond coatings by combination of electron cyclotron resonance plasma etching and mechanical polishing［J］. Chinese Journal of Vacuum Science and Technology, 2015(2): 174-178. (in Chinese)

[5] JI SH M, CHI Y W, TAN D P. Research of abrasive injection process to the wall and machining characteristic of soft abrasive flow machining［J］. Journal of Mechanical Engineering, 2012, 48(13): 174-183. (in Chinese)

[6] PANG Y X, TANG Y, LIANG L, et al.. Flow field simulation and experimental research on interactive erosion and cavitation wears in three phases［J］. Journal of Mechanical Engineering, 2012, 48(3): 115-120. (in Chinese)

[7] FU Q, YUAN SH Q, ZHU R SH, et al.. Numerical simulation and experiment on gas-liquid-solid multiphase flow in centrifugal pump［J］. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2012, 28(14): 52-57. (in Chinese)

[8] ZHANG Z X, DONG Z N. Viscous Fluid Mechanics［M］. Beijing: Tsinghua University Press, 2011. (in Chinese)

[9] SHIH T, LIOU W W, SHABBIR A, et al.. A new eddy viscosity model for high reynolds number turbulent flows［J］. Computers & Fluids, 1995, 24(3): 227-238.

[10] ZHAO B J, YUAN SH Q, LIU H L, et al.. Simulation of solid-liquid two-phase turbulent flow in double-channel pump based on Mixture model［J］. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2008, 24(1): 7-12. (in Chinese)

[11] JI SH M, MA B L, TAN D P. Numerical analysis of soft abrasive flow in structured restraint flow passage［J］. Opt. Precision Eng., 2011, 19(9): 2092-2099. (in Chinese)

[12] JI SH M, FU Y ZH, TAN D P. Numerical analysis and processing experiment of double-inlet restraint flow field in the soft abrasive flow machining［J］. Journal of Mechanical Engineering, 2012, 48(19): 177-185. (in Chinese)

[13] LI CH, JI SH M, TAN D P, et al.. Study of near wall area micro-cutting mechanism and finishing characteristics for softness abrasive flow finishing ［J］. Journal of Mechanical Engineering, 2014, 50(9): 161-168. (in Chinese)