• Acta Photonica Sinica
  • Vol. 47, Issue 12, 1214003 (2018)
YU Lei1、*, YANG Shuang-ning1, LIU Xue-qing1、2, and LI De-hui1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3788/gzxb20184712.1214003 Cite this Article
    YU Lei, YANG Shuang-ning, LIU Xue-qing, LI De-hui. Ion Beam Etching Assisted Femtosecond Laser Machining to Manufacture Silicon Carbide Micro-optical Components[J]. Acta Photonica Sinica, 2018, 47(12): 1214003 Copy Citation Text show less
    References

    [1] PECHOLT B, GUPTA S, MOLIAN P. Review of laser microscale processing of silicon carbide[J]. Journal of Laser Applications, 2011, 23(1): 012008.

    [2] ZHAO De-sheng, LIU Ran, FU Kai, et al. An Al0.25Ga0.75N/GaN lateral field emission device with a nano void channel[J]. Chinese Physics Letters, 2018(3): 114-117.

    [3] RAPE A, LIU X, KULKARNI A, et al. Alloy development for highly conductive thermal management materials using copper-diamond composites fabricated by field assisted sintering technology[J]. Journal of Materials Science, 2013, 48(3): 1262-1267.

    [4] CHEN Shuo, LUNA L E, YOU Zheng, et al. Ni-induced graphitization for enhanced long-term stability of ohmic contact to polycrystalline 3C-SiC[J]. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films, 2015, 33(3): 031507.

    [5] LU Xi-yuan, LEE J Y, FENG P X, et al. Silicon carbide microdisk resonator[J]. Optics Letters, 2013, 38(8): 1304.

    [6] MASSOUBRE D, WANG Li, HOLD L, et al. Vertically conductive single-crystal SiC-based Bragg reflector grown on Si wafer[J]. Scientific Reports, 2015, 5: 17026.

    [7] LIM H, RYU J, KIM G, et al. Nanoimprint lithography with a focused laser beam for the fabrication of nanopatterned microchannel molds.[J]. Lab on A Chip, 2013, 13(16): 3188-3191.

    [8] KRAVCHENKO A, SHEVCHENKO A, GRAHN P, et al. Photolithographic periodic patterning of gold using azobenzene-functionalized polymers[J]. Thin Solid Films, 2013, 540(4): 162-167.

    [9] LIU Xin, ZHANG Man, PANG Hui, et al. Fabrication of large-angle diffractive optical element based on nanoimprint lithography[J]. Acta Photonica Sinica, 2016, 45(6): 0605001.

    [10] PEA M, MUSSI V, BARUCCA G, et al. Focused ion beam surface treatments of single crystal zinc oxide for device fabrication[J]. Materials & Design, 2016, 112: 530-538.

    [11] BISHOP J, FRONZI M, ELBADAWI C, et al. Deterministic nanopatterning of diamond using electron beams[J]. Acs Nano, 2018, 12(3): 2873-2882.

    [12] YONG M K, CHOI K C. Distortion analysis of periodic ring patterns fabrication using surface plasmon interference lithography with an Al hexagonal grating structure on glass[J]. IEEE Transactions on Nanotechnology, 2018, 17(3): 432-436.

    [13] WU Yi-ming, LI Ming, CHENG Guang-hua. Fabricating micro fiber fabry-perot sensor with femtosecond laser pluses[J]. Acta Photonica Sinica, 2010, 39(4): 584-587.

    [14] BULUSHEV E, BESSMELTSEV V, DOSTOVALOV A, et al. High-speed and crack-free direct-writing of microchannels on glass by an IR femtosecond laser[J]. Optics & Lasers in Engineering, 2016, 79: 39-47.

    [15] LIU Xue-qing, CHEN Qi-dai, GUAN Kai-min, et al. Dry-etching-assisted femtosecond laser machining[J]. Laser & Photonics Reviews, 2017, 11(3): 1600115.

    [16] LIU Xue-qing, YU Lei, CHEN Qi-dai, et al. Mask-free construction of three-dimensional silicon structures by dry etching assisted gray-scale femtosecond laser direct writing[J]. Applied Physics Letters, 2017, 110(9): 091602.

    [17] SU Zhi-wei, CHEN Qing-chuan, FENG Chun-tang, et al. Ion beam polishing of K9 glass[C]. 2006 National Conference on Charged Particle Sources and Beams, 2006: 132-133.

    CLP Journals

    [1] Yiming LU, Bingrong GAO, Xueqing LIU, Qidai CHEN. Fabrication of High Temperature Resistant Geometric Phase Element Inside Sapphire by Femtoesecond Laser(Invited)[J]. Acta Photonica Sinica, 2021, 50(6): 71

    YU Lei, YANG Shuang-ning, LIU Xue-qing, LI De-hui. Ion Beam Etching Assisted Femtosecond Laser Machining to Manufacture Silicon Carbide Micro-optical Components[J]. Acta Photonica Sinica, 2018, 47(12): 1214003
    Download Citation