[2] PASUPATHY K, BERNDT M, CASTEL A, et al. Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8 years［J］. Construction and Building Materials, 2016, 125: 661-669.

[6] HUANG G D, JI Y S, ZHANG L L, et al. Advances in understanding and analyzing the anti-diffusion behavior in complete carbonation zone of MSWI bottom ash-based alkali-activated concrete［J］. Construction and Building Materials, 2018, 186: 1072-1081.

[7] RSNEN V, PENTTALA V. The pH measurement of concrete and smoothing mortar using a concrete powder suspension［J］. Cement and Concrete Research, 2004, 34(5): 813-820.

[8] LI L F, NAM J, HARTT W H. Ex situ leaching measurement of concrete alkalinity［J］. Cement and Concrete Research, 2005, 35(2): 277-283.

[9] PASUPATHY K, SANJAYAN J, RAJEEV P. Evaluation of alkalinity changes and carbonation of geopolymer concrete exposed to wetting and drying［J］. Journal of Building Engineering, 2021, 35: 102029.

[10] BADAR M S, KUPWADE-PATIL K, BERNAL S A, et al. Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes［J］. Construction and Building Materials, 2014, 61: 79-89.

[11] ZHANG J, SHI C J, ZHANG Z H. Effect of Na2O concentration and water/binder ratio on carbonation of alkali-activated slag/fly ash cements［J］. Construction and Building Materials, 2021, 269: 121258.

[12] MEI K Y, GU T, ZHENG Y Z, et al. Effectiveness and microstructure change of alkali-activated materials during accelerated carbonation curing［J］. Construction and Building Materials, 2021, 274: 122063.

[13] NEDELJKOVI M, GHIASSI B, VAN D L S, et al. Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes［J］. Cement and Concrete Research, 2019, 116: 146-158.

[18] JEON D, JUN Y B, JEONG Y, et al. Microstructural and strength improvements through the use of Na2CO3 in a cementless Ca(OH)2-activated Class F fly ash system［J］. Cement and Concrete Research, 2015, 67: 215-225.

[19] EL-DIDAMONY H, AMER A A, ABD ELA-ZIZ H. Properties and durability of alkali-activated slag pastes immersed in sea water［J］. Ceramics International, 2012, 38(5): 3773-3780.

[20] RASHAD A M, ZEEDAN S R. The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load［J］. Construction and Building Materials, 2011, 25(7): 3098-3107.

[22] NEDELJKOVI M, GHIASSI B, MELZER S, et al. CO2 binding capacity of alkali-activated fly ash and slag pastes［J］. Ceramics International, 2018, 44(16): 19646-19660.