[1] ZOU Jing-hui. Silicon based grating coupler for fiber-chip coupling［D］. Wuhan: Huazhong University of Science & Technology, 2017.

[2] WANG Yong-chen, ZHAO Jie.Quantum well intermixing and photonic integrated circuits［J］. Research&Progress of Sse, 2004, 24(4): 517-524.

[3] HU Juan, LIN Huan, WANG Wei-jun, et al. Research progress of Silicon photonic mode size converters［J］. Laser&Optoelectronics Progress, 2018, 55(3): 41-50.

[4] SURE A, DILLON T, MURAKOWSKI J, et al. Fabrication and characterization of three-dimensional silicon tapers［J］. Optics Express, 2003, 11(26): 3555-3561.

[5] FU Yun-fei, LI Qing-bo. Research progresses of spot-size converter used for silicon photonic device［J］. Semiconductor Optoelectronics, 2013, 34(1): 1-5.

[6] ZHANG Xi-fei, XIAO Jin-biao, ZHU Jian-bin, et al. Study of spot-size converter based on optical tapered planar waveguide［J］. Journal of Southeast University (Natural Science Edition), 2003, 33(1): 22-25.

[7] YOU Yang, ZHAO Ming, YANG Zhen-yu. Progress of study on waveguide and fiber coupling design［J］. Laser&Optoelectronics Progress, 2013, 50(2): 62-71.

[8] SHIRAISHI K, YODA H, OHSHIMA A, et al. A silicon-based spot-size converter between single-mode fibers and Si-wire waveguides using cascaded tapers［J］. Applied Physics Letters, 2007, 91(14): 549.

[9] YANG Z, FANG N, WU A, et al. Fabrication and characterization of integrated three-dimensional linear taper on silicon-on-insulator［J］. Optical Engineering, 2009, 48(3): 30503-30503.

[10] KU K N, LEE M C M. Wide-band optical mode converters for coupling between fibers and silicon photonic wires with large misalignment tolerance［J］. Journal of Lightwave Technology, 2013, 31(10): 1616-1620.

[11] CARDENAS J, POITRAS C B, LUKE K, et al. High coupling efficiency etched facet tapers in silicon waveguides［J］. IEEE Photonics Technology Letters, 2014, 26(23): 2380-2382.

[12] DONG Xiao-chun, DU Chun-lei, PAN Li, et al. A new method for control relief depth of micro-lens array［J］. Opto-Electronic Engineering, 2003, 30(4): 1-3.

[13] DONG Xiao-chun, DU Chun-lei. The developing threshold method for precise profile control of microlens array with high numerical aperture［J］. Acta Optica Sinica, 2004, 24(7): 896-872.

[14] ZHANG Wei-guo,DONG Xiao-chun, DU Chun-lei. Microlens array imaging-based photolithography technique［J］. Infrared and Laser Engineering, 2010, 39(3): 469-472.

[15] LEI Yu. Stepper projection lithography and its common faults analysis［J］. Equipment for Electronic Products Manufacturing, 2018, 47(2): 40-45.

[16] LIU Dan, CHENG Zhao-wu, GAO Hai-jun, et al.Proress of wafer stage and reticle stage for step-and-scan-lithography system［J］. Laser & Optoelectronics Progress,2003, 40(5): 14-20.

[17] LIU Qi. Method and control of synchronization error correction on the stage of step-and-scan lithography［D］. Beijing: University of Chinese Academy of Sciences, 2013

[18] LI Lan-lan. Synchronization control strategy and method of step-and-scan projection lithography［D］. Beijing: University of Chinese Academy of Sciences,2014.

[19] LI Li-wen.Development and prospect of optical lithography equipment［J］. Electronic Test, 2016(9): 125-125.

[20] HAXHA S, LADELY E O, ABDELMALEK F, et al. Optimization of compact lateral, vertical, and combined tapered spot-size converters by use of the beam-propagation method［J］. Applied Optics, 2006, 45(2): 288-296.

[21] YOU Yang. The study on integrated optical waveguide and fiber coupling design［D］. Wuhan: Huazhong University of Science&Technology, 2013.

[22] MA Hui-lian, YANG Jian-yi, LI Jin, et al. Optical waveguide-fiber direct coupling［J］. Study on Optical Communications, 2000, (3): 43-47.

[23] YANG Di, YU Jin-zhong, LIU Zhong-li.The technology of fiber attachment to guided wave devices［J］. Laser&Infrared, 2003, 33(4): 306-310.

[24] ALFERNESS R, RAMASWAMY V, KOROTKY S, et al. Efficient single-mode fiber to titanium diffused lithium niobate waveguide coupling for λ=1.32 μm［J］. IEEE Journal of Quantum Electronics, 1982, 18(10): 1807-1813.

[25] GU Dong-xu. Study on the end-coupling of optical fiber and waveguide device［D］. Wuhan: Huazhong University of Science & Technology,2011.

[26] WANG Gen-cheng.Studyon basic functional devices of silicon-based photonic integration［D］. Hangzhou: Zhejiang University, 2018.

[27] FU Y, YE T, TANG W, et al. Efficient adiabatic silicon-on-insulator waveguide taper［J］. Photonics Research, 2014, 2(3): 41-44.

[28] HU Jiang, CAI Chang-long, LIU Wei-guo, et al. Technical study on selection ratio of Si/PMMA based on ICP etching［J］. Microprocessors, 2014, 35(1): 9-11.

[29] CHEN Shao-jun, LI Yi-gui.Parameter optimization based on high-aspect ratio Si dry etching［J］. Micronanoelectronic Technology, 2009, 46(12): 750-754.

[30] KHAZI I, MUTHIAH U, MESCHEDER U. 3D free forms in c-Si via grayscale lithography and RIE［J］. Microelectronic Engineering, 2018, 193: 34-40.