• APPLIED LASER
  • Vol. 44, Issue 3, 13 (2024)
Cui Baolei1,2,*, Liu Weijun1, and Bian Hongyou1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.14128/j.cnki.al.20244403.013 Cite this Article
    Cui Baolei, Liu Weijun, Bian Hongyou. Optimization of Process Parameters for Laser Additive Manufacturing of TiAl Alloy Based on the Response Surface Method[J]. APPLIED LASER, 2024, 44(3): 13 Copy Citation Text show less
    References

    [2] LIU Z Q, WANG C Y, WANG W B, et al. Effects of Tantalum on the microstructure and properties of Ti48Al2Cr2Nb alloy fabricated via laser additive manufacturing[J]. Materials Characterization, 2021, 179: 111317.

    [10] SHI X S, JIANG F L, WANG Y L, et al. Morphology and quality prediction of laser cladding 3540Fe coating based on response surface method[J]. Surface Technology, 2022, 51(12): 392405.

    [11] ALAHMARI A, ASHFAQ M, ALFAIFY A, et al. Predicting surface quality of γTiAl produced by additive manufacturing process using response surface method[J]. Journal of Mechanical Science and Technology, 2016, 30(1): 345352.

    [14] FANG X W, REN C Q, ZHANG L J, et al. A model of bead size based on the dynamic response of CMTbased wire and arc additive manufacturing process parameters[J]. Rapid Prototyping Journal, 2021, 27(4): 741753.

    [15] MA M Y, XIONG W J, LIAN Y, et al. Modeling and optimization for laser cladding via multiobjective quantumbehaved particle swarm optimization algorithm[J]. Surface and Coatings Technology, 2020, 381: 125129.

    [16] ZHANG J, ZHANG Q L, CHEN Z J, et al. Experimental and statistical analyses of geometry characteristics of Inconel 718 laser clad layer with response surface methodology[J]. Journal of Laser Applications, 2019, 31(3): 032016.

    [22] SUN Y W, HAO M Z. Statistical analysis and optimization of process parameters in Ti6Al4V laser cladding using Nd: YAG laser[J]. Optics and Lasers in Engineering, 2012, 50(7): 985995.

    [23] JUECHTER V, SCHAROWSKY T, SINGER R F, et al. Processing window and evaporation phenomena for Ti6Al4V produced by selective electron beam melting[J]. Acta Materialia, 2014, 76: 252258.

    Cui Baolei, Liu Weijun, Bian Hongyou. Optimization of Process Parameters for Laser Additive Manufacturing of TiAl Alloy Based on the Response Surface Method[J]. APPLIED LASER, 2024, 44(3): 13
    Download Citation