[1] BITTERLY J G. Flywheel technology: past, present, and 21st century projections ［J］. IEEE Aerospace and Electronic Systems Magazine, 1998,13:13-16.

[2] LIU Q,FANG J CH,HAN B CH, et al.. Locking device for magnetic bearing flywheel and its optimization ［J］. Opt. Precision Eng., 2010,18(8):1814-1821. (in Chinese)

[3] WANG CH E, FANG J CH,TANG J Q, et al.. Thermal design method and experimental research of magnetically suspended reaction flywheel ［J］. Acta Aeronautica et Astronautica Sinica, 2011,32(4):598-607. (in Chinese)

[4] HAN B CH, LIU Q. Electromagnetic locking device based on self-locking for magnetic suspended flywheel ［J］. Opt. Precision Eng., 2009,17(10):2456-2464. (in Chinese)

[5] LIU B, FANG J CH, LIU G. Implementation if active vibration control for magnetically suspended flywheel based on TMS320C6713B + FPGA digital controller ［J］. Opt. Precision Eng., 2009,17(1):151-157. (in Chinese)

[6] WEN SH B, JIANG SH Y. Stress analysis of composite energy storage flywheel in charge-discharge process ［J］. Acta Energy Solaris Sinica, 2011, 32(12):1839-1844. (in Chinese)

[7] BAI Y, LI H W, WU Y H, et al.. Design of composite flywheel rotor ［J］. Opt. Precision Eng., 2011,32(12):1839-1844. (in Chinese)

[8] HA S K,KIM H T,HAN S C. Effects of rotor size and epoxy system on the process-induced residual strains within multi-rings composite rotors ［J］. Journal of Composite Materials, 2004,38:871-885.

[9] TUTUNCU N. Effect of anisotropy on stress in rotating discs ［J］. Int. J. Mech. Sci, 1995,37: 873-881.

[10] HA S K,JEONG J Y. Effects of winding angles on through-thickness properties and residual strains of thick filament wound composite rings ［J］. Composite Science and Technology, 2005,65:27-35.

[11] SUNG K H, SEONG J K, SANA U N, et al.. Design optimization and fabrication of a hybrid composite flywheel rotor ［J］. Compos Struct, ［2012］.http://dx.doi.org/10.1016/j.compstruct.2012.04.015.

[12] HASAN C,MUZAFFER T,GRKAN A. Stress analysis of curvilinearly orthotropic rotating discs under mechanical and thermal loading ［J］. Journal of Reinforced Plastics and Composites, 2005,24: 831-838.

[13] WEN SH B,JIANG SH Y. Optimum design of hybrid composite multi-ring flywheel rotor based on displacement method ［J］. Composite Science and Technology, 2012,72: 982-998.

[14] QIN Y, XIA Y M, MAO T X. Simplified and fine analyses of the full deformation and stress of Pressfit of the hollow multi-ring composite flywheel ［J］. Acta Materiae Compositae Sinica, 2003, 20(5):95-99. (in Chinese)

[15] LI CH, WAN ZH CH, ZHENG Y P, et al.. Comparison of effects of different young’s moduli on stress and displacement of composite flywheel ［J］. Opt. Precision Eng., 2009,17(7):1609-1614. ( in Chinese)

[16] TANG JQ, FANG J C,GE S S. Roles of superconducting magnetic bearings and active magnetic bearings in attitude control and energy storage flywheel ［J］. Physica C, 2012,483:178-185.

[17] GENTA G. Kinetic Energy Storage: Theory and Practice of Advanced Flywheel Systems ［J］. London: Butterworth & Co Ltd, 1985: 60- 69.