[1] SUN Ruoduan, QIU Lirong, YANG Jiamiao, et al. Laser differential confocal radius measurement system［J］. Applied Optics, 2012,51(26): 6275.

[2] WANG Yun, QIU Lirong. Laser differential confocal lens thickness measurement［J］. Measurement Science and Technology, 2012,23(055204): 1-2.

[3] SCHMITZ T L,GARDNER N,VAUGHN M, et al. Improving optical bench radius measurements using stage error motion data［J］. Applied Optics,2008,47(36): 6692-6693.

[4] XU Peng, ZHAO Weiqian, WANG Fangbiao, et al. Laser differential confocal curvature measurement system with grating length［J］. Journal of Applied Optics, 2014,35(6): 1023-1024.

[5] GU Zhiyuan, YAN Changxiang, HU Chunhui, et al. Coordinate datum transition method for optical system computer-aided alignment［J］. Acta Optica Sinica, 2014, 34(3): 0322003-2.

[6] JIANG Hong.The structure design of nanometer rResolution overloading electronic two-dimension adjusting frame［D］.Changchun: Changchun University of Science and Technology,2012: 1-3.

[7] WANG Xu, QIU Lirong, ZHAO Weiqian, et al. Error analysis for a laser differential confocal radius measurement system［J］. Applied Optics, 2015, 54(5): 1081-1082.

[8] WANG Xu, WANG Zhongyu, ZHAO Weiqian, et al. Uncertainty evaluation in laser differential confocal radius-of-curvature measurement［J］. Journal of Applied Optics, 2014, 35(1): 155-157.

[9] ZHANG Jianhuan, ZHOU Junxian. Effect of tilt angle of surface to be measured on differential confocal microscope pointing signal［J］. Acta Optica Sinica, 2006,26(9): 1365-1366.

[10] ZHANG Yanan, SHEN Lili, SHEN Weixing, et al. Design of support distribution for attitude-adjusting mechanism of large lens［J］. Optics and Precision Engineering, 2010,18(12): 2626-2628.

[11] ZHANG Limin, WU Yuanhao. Design of multiple DOF fine tuning mechanism for 45°tilting mirror［J］. Acta Photonica Sinica, 2010,39(12): 2139-3140.

[12] LUO Yong. Coordinates-decoupling of multidimensional precision optical aadjusting frame［J］.Opto-Electronic Engineering, 2011, 38(4): 37-40.

[13] YU Shengli, ZHOU Jianxun, XIAO Hong. Development and analysis of adjusting tool for transmission and reflectance detection of large aperture optical element［J］. Tool Engineering, 2018,52(3): 136-137.