• Optics and Precision Engineering
  • Vol. 22, Issue 12, 3224 (2014)
WANG Tong-tong*
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/ope.20142212.3224 Cite this Article
    WANG Tong-tong. Decreasing surface scattering of sintered silicon carbide mirror by surface modification technique[J]. Optics and Precision Engineering, 2014, 22(12): 3224 Copy Citation Text show less
    References

    [1] PAQUIN R A, MAGIDA M B, VEMOLD C L. Large optics from silicon carbide [J]. SPIE, 1991, 1618: 53-60.

    [2] EBIZUKA N, ETO H, DAI Y, et al.. SiC ultra light mirror for large space telescope and for extremely huge ground based telescope II [J]. SPIE, 2004, 5487: 1013-1017.

    [3] BREIDENTHAL R S, GALAT-SKEY R, GEANY J J. Optical surfacing of one-meter class reaction-bonded silicon carbide [J]. SPIE, 1995, 2453: 248-253.

    [4] WANG T T, GAO J S, WANG X Y, et al.. Surface modification on a silicon carbide mirror for space application [J]. Chin. Opt. Lett., 2010, 8(Supp.): 183-185.

    [5] ZHAO R CH, BAO J X. Investigation and application of large scale lightweight SiC mirror [J]. Chinese Optics, 2013,7(4): 552-558. (in Chinese)

    [6] KANG J, XUAN B, XIE J J. Manufacture technology status of surface modified silicon carbide mirrors [J]. Chinese Optics, 2013, 6(6): 824-833. (in Chinese)

    [7] ZHOU H, ZHANG C R, CAO Y B, et al.. Lightweight C/SiC mirrors for space application [J]. Large Mirrors and Telesescopes, 2006, 6148: 1480-1486.

    [8] GOELA J S, TAYLOR R L. Chemical vapor deposition for silicon cladding on advanced ceramics [J]. J. Am. Ceram. Soc., 1989, 72 (9): 1747-1750.

    [9] AOUCHER M, FARHI G, MOHAMMED-BRAHIMT. Crystallization of hydrogenated amorphous silicon deposited at high rate by DC magnetron sputtering [J]. Journal of Non-Crystalline Solids, 1998, 227/230: 958-961.

    [10] TANG H,HUANG Z R, TAN S. PVD SiC and PVD Si coatings on RB SiC for surface modification[J]. SPIE, 2006,6149: 61490A-1-6.

    [11] XUE D L. Manufacture fine optical performance surface of aspheric silicon carbide mirror [J]. Opt. Precision Eng., 2008,16(12): 2479-2484. (in Chinese)

    [12] YUAN Y T, LIU H, SHAO CH B, et al.. Preparation and performance of Si coating on RB-SiC mirror for surface modification [J]. High Power Laser and Particle Beams, 2011, 23(5): 1281-1284. (in Chinese)

    [13] WANG T T. Fabrication of the long-wave infrared germanium carbide antireflection coatings by end-hall ion source [J]. Chin. J. Lumin., 2013,34(3): 319-323. (in Chinese)

    [14] CHEN H, WANG T T, GAO J S, et al.. Improvement of signal noise ratio of TMC optical system by SiC surface modification technology [J]. Opt. Precision Eng., 2009,17(12): 2952-2957. (in Chinese)

    [15] CHEN H, GAO J S, SONG Q, et al.. Si modified coating on SiC substrate by ion beam assisted deposition [J]. Opt. Precision Eng., 2008, 16(3): 381-385. (in Chinese)

    [16] STOVER J C. Optical Scattering, Measurement and Analysis [M]. New York: McGraw Hill, 1990.

    [17] BENNETT H E, PORTEUS J O. Relation between surface roughness and specular reflectance at normal incidence [J]. Journal of the Optical Society of America, 1961, 51 (2): 123-129.

    [18] LINDSTROM T, RONNOW D. Total integrated scattering from transparent substrates in the infrared region-validity of scalar theory [J]. Opt. Eng., 2000, 39(2): 478-487.

    [19] HOU H H, HONG R J, ZHANG D P, et al.. Total integrated scatterometer for measuring the micro roughness of optical thin films [J]. Chinese Journal of Lasers, 2005, 32(9): 1258-1261. (in Chinese)

    [20] HOU H H, SUN X L, TIAN G L, et al.. Research on the surface scattering properties of optical films by the total integrated scatter [J]. Acta Physica Sinica, 2009, 58(9): 6425-6429. (in Chinese)

    WANG Tong-tong. Decreasing surface scattering of sintered silicon carbide mirror by surface modification technique[J]. Optics and Precision Engineering, 2014, 22(12): 3224
    Download Citation