[1] ?AK M, MUZIOL G, SIEKACZ M, et al. Bidirectional light-emitting diode as a visible light source driven by alternating current[J]. Nat Commun, 2023, 14: 7562.
[2] YEN H H, KUO H C, YEH W Y. Characteristics of single-chip GaN-based alternating current light-emitting diode[J]. Jjap, 2008,47(12R): 8808.
[3] MAO A J, ZHAO Z Y, WANG J T, et al. Crystal structure and photo-luminescence of Gd3Ga2(Al3–ySiy)(O12–yNy):Ce3+ phosphors for AC-warm LEDS[J]. Chem Eng J, 2019, 368: 924–932.
[4] TICLEANU C. Impacts of home lighting on human health[J]. Light Res Technol, 2021, 53(5): 453–475.
[5] LEHMAN B, WILKINS A J. Designing to mitigate effects of flicker in led lighting: Reducing risks to health and safety[J]. IEEE Power Electron Mag, 2014, 1(3): 18–26.
[6] LAI J N, LONG Z W, QIU J B, et al. Warm white light emitting from single composition SrGa12O19:Dy3+ phosphors for AC-LED[J]. J Am Ceram Soc, 2020, 103(1): 335–345.
[7] EH C W, LI Y, WANG J, et al. Appropriate green phosphor of SrSi2O2N2:Eu2+, Mn2+ for AC LEDs[J]. Opt Express, 2012, 20(16):18031–18043.
[8] CHEN D Q, XIANG W D, LIANG X J, et al. Advances in transparent glass–ceramic phosphors for white light-emitting diodes—A review[J].J Eur Ceram Soc, 2015, 35(3): 859–869.
[9] FENG S W, GUO Y C, SUN X M, et al. Elevating photoluminescence properties of Y3MgAl3SiO12:Ce3+ transparent ceramics for high-power white lighting[J]. J Rare Earths, 2023, 41(5): 649–657.
[10] HUANG P, ZHOU B Y, ZHENG Q, et al. Nano wave plates structuring and index matching in transparent hydroxyapatite-YAG:Ce composite ceramics for high luminous efficiency white light-emitting diodes[J]. Adv Mater, 2020, 32(1): e1905951.
[11] GU C, WANG X J, XIA C, et al. A new CaF2–YAG:Ce composite phosphor ceramic for high-power and high-color-rendering WLEDs[J].J Mater Chem C, 2019, 7(28): 8569–8574.
[12] LIN H, HU T, CHENG Y, et al. Glass ceramic phosphors: Towards long-lifetime high-power white light-emitting-diode applications–A review[J]. Laser Photonics Rev, 2018, 12(6): 1700344.
[13] LIN H, WANG B, XU J, et al. Phosphor-in-glass for high-powered remote-type white AC-LED[J]. ACS Appl Mater Interfaces, 2014,6(23): 21264–21269.
[14] LIN H, XU J, HUANG Q M, et al. Bandgap tailoring via Si doping in inverse-garnet Mg3Y2Ge3O12:Ce3+ persistent phosphor potentially applicable in AC-LED[J]. ACS Appl Mater Interfaces, 2015, 7(39):21835–21843.
[15] LIN H, WANG B, HUANG Q M, et al. Lu2CaMg2(Si1–xGex)3O12:Ce3+ solid-solution phosphors: Bandgap engineering for blue-light activated afterglow applicable to AC-LED[J]. J Mater Chem C, 2016, 4(43): 10329–10338.
[16] IQBAL F, KIM S, YIE H, et al. Effect of alkali metal oxides on reliability and degradation of phosphor-in-glass encapsulants for white LEDs[J]. Ceram Int, 2016, 42(8): 10393–10398.
[17] ZAMIR S. Solubility limit of Si in YAG at 1 700 ℃ in vacuum[J]. J Eur Ceram Soc, 2017, 37(1): 243–248.
[18] KUDO S, KISHIOKA A, KUWAHARA H, et al. Encapsulation of nitride phosphors into sintered phosphate glass by pressureless firing and hot isostatic pressing[J]. J Am Ceram Soc, 2019, 102(3):1259–1268.
[19] ZHOU B Y, LUO W, LIU S, et al. Enhancing the performance of Ce:YAG phosphor-in-silica-glass by controlling interface reaction[J]. Acta Mater, 2017, 130: 289–296.
[20] YOON C B, KIM S, CHOI S W, et al. Highly improved reliability of amber light emitting diode with Ca–α-SiAlON phosphor in glass formed by gas pressure sintering for automotive applications[J]. Opt Lett, 2016, 41(7): 1590–1593.
[21] FANG Z J, CAO R P, ZHANG F T, et al. Efficient spectral conversion from visible to near-infrared in transparent glass ceramics containing Ce3+–Yb3+ codoped Y3Al5O12 nanocrystals[J]. J Mater Chem C, 2014,2(12): 2204–2211.
[22] TAN J C, NARENDRAN N. Defining phosphor luminescence property requirements for white AC LED flicker reduction[J]. J Lumin, 2015,167: 21–26.
[23] LIU Y F, LIU P, WANG L, et al. A two-step solid-state reaction to synthesize the yellow persistent Gd3Al2Ga3O12:Ce3+ phosphor with an enhanced optical performance for AC-LEDs[J]. Chem Commun, 2017,53(77): 10636–10639.
[24] REA M S, Eds. The IESNA lighting handbook[M]. New York:Illuminating Engineering Society, 2000, 44–87.
[25] YUAN W H, PANG R, WANG S W, et al. Enhanced blue-light excited cyan-emitting persistent luminescence of BaLu2Al2Ga2SiO12:Ce3+, Bi3+ phosphors for AC-LEDs via defect modulation[J]. Light Sci Appl,2022, 11(1): 184.
[26] YUAN W H, PANG R, WANG S W, et al. Blue-light activated green emitting BaY2Al2Ga2SiO12:Ce3+, Bi3+: Efficient persistent luminescence phosphors for AC-LEDs[J]. Inorg Chem Front, 2023, 10(4):1203–1214.
