• Bulletin of the Chinese Ceramic Society
  • Vol. 42, Issue 10, 3764 (2023)
LIN Congyi1,*, TAO Honglei2, and LI Wei2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: Cite this Article
    LIN Congyi, TAO Honglei, LI Wei. Low Temperature Sintering and Microwave Dielectric Properties of MnO2-CuO-TiO2 Co-Doped Al2O3 Ceramics[J]. Bulletin of the Chinese Ceramic Society, 2023, 42(10): 3764 Copy Citation Text show less
    References

    [1] ALFORD N M, PENN S J. Sintered alumina with low dielectric loss[J]. Journal of Applied Physics, 1996, 80(10): 5895-5898.

    [3] ERKALFA H, MISIRLI Z, BAYKARA T. Densification of alumina at 1 250 ℃ with MnO2 and TiO2 additives[J]. Ceramics International, 1995, 21(5): 345-348.

    [4] YAN M F, RHODES W W. Low temperature sintering of TiO2[J]. Materials Science and Engineering, 1983, 61(1): 59-66.

    [5] HUANG C L, WANG J J, HUANG C Y. Microwave dielectric properties of sintered alumina using nano-scaled powders of alumina and TiO2[J]. Journal of the American Ceramic Society, 2007, 90(5): 1487-1493.

    [7] ZHANG P, TAO H L, LI W. Low temperature sintering of Al2O3 microwave dielectric ceramics co-doped with 1.5wt% low temperature sintering of Al2O3 microwave dielectric ceramics co-doped with 1.5wt%Nb2O5-0.5wt%ZrO2[J]. Journal of Materials Science: Materials in Electronics, 2022, 33(19): 15773-15778.

    [8] DONG G Y, LI W. Microwave dielectric properties of Al2O3 ceramics sintered at low temperature[J]. Ceramics International, 2021, 47(14): 19955-19958.

    [9] KESKI J R, CUTLER I B. Effect of Manganese oxide on sintering of alumina[J]. Journal of the American Ceramic Society, 1965, 48(12): 653-654.

    [10] LI H Y, XI X A, MA J, et al. Low-temperature sintering of coarse alumina powder compact with sufficient mechanical strength[J]. Ceramics International, 2017, 43(6): 5108-5114.

    [12] XUE L A, CHEN I W. Low-temperature sintering of alumina with liquid-forming additives[J]. Journal of the American Ceramic Society, 1991, 74(8): 2011-2013.

    [13] SATHIYAKUMAR M, GNANAM F D. Influence of additives on density, microstructure and mechanical properties of alumina[J]. Journal of Materials Processing Technology, 2003, 133(3): 282-286.

    [14] FU Y J, SHEN P, HU Z J, et al. The role of CuO-TiO2 additives in the preparation of high-strength porous alumina scaffolds using directional freeze casting[J]. Journal of Porous Materials, 2016, 23(2): 539-547.

    [15] DE LA RUBIA M A, REINOSA J J, LERET P, et al. Experimental determination of the eutectic temperature in air of the CuO-TiO2 pseudobinary system[J]. Journal of the European Ceramic Society, 2012, 32(1): 71-76.

    [16] WANG Z J, CHEN Y. Structures and microwave dielectric properties of Ti-doped CeO2 ceramics with a near-zero temperature coefficient of resonant frequency[J]. Journal of Alloys and Compounds, 2021, 854: 157270.

    [17] IDDLES D M, BELL A J, MOULSON A J. Relationships between dopants, microstructure and the microwave dielectric properties of ZrO2-TiO2-SnO2 ceramics[J]. Journal of Materials Science, 1992, 27(23): 6303-6310.

    [18] PENN S J, ALFORD N M, TEMPLETON A, et al. Effect of porosity and grain size on the microwave dielectric properties of sintered alumina[J]. Journal of the American Ceramic Society, 2005, 80(7): 1885-1888.

    LIN Congyi, TAO Honglei, LI Wei. Low Temperature Sintering and Microwave Dielectric Properties of MnO2-CuO-TiO2 Co-Doped Al2O3 Ceramics[J]. Bulletin of the Chinese Ceramic Society, 2023, 42(10): 3764
    Download Citation