[1] XU Y, LAI D X, FENG T G, et al.. A model to study the transmissivity of diagnostic holes on hohlraum［J］. High Power Laser and Particle Beams, 2001,13(2): 173-176. (in Chinese)

[2] ZHENG ZH J, CHEN J B, DING Y K, et al.. The laser energy injection efficiency measurement for the half-cavity target［J］. High Power Laser and Particle Beams, 2000,12(1): 43-47. (in Chinese)

[3] KUANG L Y, WANG CH K, WANG ZH B, et al.. Angular distribution of stimulated Brillouin scattering from interaction of 527 nm laser with Au and Al disk targets［J］. High Power Laser and Particle Beams, 2007,19(3): 413-416. (in Chinese)

[4] KIRKWOOD R K,MCCARVILLE T,FROULA D H, et al.. Calibration of initial measurements from the full aperture backscatter system on the National Ignition Facility［J］. Rev. Sci. Instrum., 2004, 75(10): 4174-4176.

[5] BOWER D E, MCCARVILLE T J,ALVAREZ S S, et al.. Full aperture backscatter station measurement system on the National Ignition Facility［J］. Rev. Sci. Instrum., 2004, 75(10): 4177-4179.

[6] MOODY J D,DATTE P,KRAUTER K, et al.. Backscatter measurements for NIF ignition targets［J］. Rev. Sci. Instrum., 2010, 81(10): 921.1-921.6.

[7] WANG CH K, JIANG X H, LIU SH Y, et al.. Stimulated Raman scattering from interaction of 2 ns, 351 nm laser with hohlraum［J］. High Power Laser and Particle Beams, 2006,18(7): 1113-1116. (in Chinese)

[8] WANG CH K, ZHANG X D, YANG D, et al.. Energy fraction measurements of stimulated Brillouin scattering and stimulated Raman scattering on Shenguang Ⅲ prototype laser facility［J］. High Power Laser and Particle Beams, 2010,22(8): 1891-1895. (in Chinese)

[9] ZHAO X F, WANG CH K, KUANG L Y,et al.. The experimental method of measurement for spatial distribution of full aperture backscatter light by circular PIN-array［J］.Nuclear Fusion and Plasma Physics, 2011,31(1): 43-47. (in Chinese)

[10] JIAO CH Y, WANG F, JIANG X H, et al.. Full aperture backscatter diagnosis system on Shenguang prototype laser facility［J］. Nuclear Electronics ＆ Detection Technology, 2011,31(3): 306-311. (in Chinese)

[11] YANG ZH H. The study of near backscatter and full-aperture backscatter measurement system［D］. Chongqing: Chongqing university, 2008. (in Chinese)

[12] WANG CH K, JIANG X H, WANG ZH B, et al.. Full-aperture backscatter station on Shenguang-Ⅱ laser facility［J］. High Power Laser and Particle Beams, 2010,22(8): 1896-1900. (in Chinese)

[13] WEI H Y, PENG X SH, XU T, et al.. Full aperture backscatter diagnostic system on Shenguang-Ⅲprototype laser facility［J］. High Power Laser and Particle Beams, 2012,24(12): 2273-2277. (in Chinese)

[14] WANG M C, CHEN G, HUANG ZH, et al.. Stability design of switchyard in SG-Ⅲ facility［J］. Opt. Precision Eng., 2011,19(11): 2664-2670.(in Chinese)

[15] SONG J B, LI G P. Design and simulation of splicing of sector-shaped segments of a large optical telescope［J］. Astronomical Research ＆ Technology, 2010,7(4): 355-361. (in Chinese)

[16] ZHANG R, HAN J J, ZANG Y ZH, et al.. Technology of segmented collimating mirror in a large solar simulator［J］. Spacecraft Environment Engineering, 2005,22(1): 50-56. (in Chinese)

[17] YANG B X. Research of SiC reflection mirror for space camera［J］. Spacecraft Recovery ＆ Remote Sensing. 2003,24(1): 15-18.(in Chinese)

[18] WANG G L, LI SH Y, DAI Y F. Fabrication of SiC mirrors applied to space camera［J］. Materials for Mechanical Engineering, 2002,26(8): 37-38.(in Chinese)

[19] ZHANG X J, LI ZH L, ZHANG ZH Y. Space telecope aspherical mirror structure design based on SiC material［J］. Infrared and Laser Engineering, 2007,36(5): 577-582. (in Chinese)

[20] CHEN W, DING Y L, HUI SH W, et al.. Design of kinematic mount for SiC scanning reflective mirror［J］. Chinese Optics, 2012,5(2): 161-166.(in Chinese)

[21] XU X H, WANG B, QIAO J, et al.. Lightweight design of mirror in fast-steering mirror system［J］. Chinese Optics, 2012,5(1): 35-41.(in Chinese)