[3] CARRE H, DAUDEVILLE L. Numerical simulation of sodalime silicate glass tempering[J]. Le Journal De Physique IV, 1996, 6(C1): C1175.
[4] DAUDEVILLE L, CARR H. Thermal tempering simulation of glass plates: inner and edge residual stresses[J]. Journal of Thermal Stresses, 1998, 21(6): 667689.
[5] GRSEL K T, ZGL F. Investigation of impact characteristics of tempered vehicle and vessel glasses[J]. Materialwissenschaft und Werkstofftechnik, 2014, 45(1): 2638.
[6] HUBERT M, LEZZI P J. Glass: annealing and tempering[M]//Encyclopedia of Materials: Technical Ceramics and Glasses. Amsterdam: Elsevier, 2021: 623631.
[7] SHUTOV A I, OSTAPKO A S, OSTAPKO T S. The effect of parameters of complex heat treatment on the properties of sheet glass[J]. Glass and Ceramics, 2003: 202204.
[8] RANTALA M. Heat transfer phenomena in float glass heat treatment processes[D]. Tampere:Tampere University of Technology, 2015.
[11] OHKUBO H, NISHIO S. Mist cooling for thermal tempering of glass[J]. Transactions of the Japan Society of Mechanical Engineers, 1988, 31(3): 11631169.
[12] SOZBIR N, YAO S C. Experimental investigation of water mist cooling for glass tempering[J]. Atomization and Sprays, 2004, 14(3): 191210.
[13] SOZBIR N, YAO S C. Spray mist cooling heat transfer in glass tempering process[J]. Heat and Mass Transfer, 2017, 53(5): 16991711.
[14] LEE J K. Cooling performance of air/water mist jet impinging for a rapid thermal annealing system[J]. Journal of the Korean Society of Manufacturing Process Engineers, 2015, 14(5): 6874.
[15] GARCIAMORENO C J, EVEREST D A, ATREYA A. Heat transfer in glass quenching for glass tempering[M]//75th Conference on Glass Problems. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015: 235252.
[18] YANG H, LIU F X, DUAN R Z, et al. Spray cooling heat transfer during glass tempering process and influencing factors on the quality of tempered glass[J]. International Journal of Thermal Sciences, 2022, 175: 107475.
[20] GARFUNKEL J H, BRIGGS C W. Glass temperature measurement using infrared techniques[J]. IFAC Proceedings Volumes, 1973, 6(5): 155162.
[21] WEN L Y. The measurement of temperature distribution of glass plate using infrared thermography[C]//1987 Technical Symposium Southeast on Optics, ElectroOptics, and Sensors. Proc SPIE 0780, Thermosense IX: Thermal Infrared Sensing for Diagnostics and Control, Orlando, FL, USA. 1987, 0780: 97100.
[25] GARDON R. Thermal tempering of glass[M]//Glass Science and Technology. Amsterdam: Elsevier, 1980: 145216.
[28] SHUTOV A I, POPOV P V, KOLOS A. Testing of hardened glass for the type of fracture[J]. Glass and Ceramics, 2001, 58: 128129.
[29] YAZC H. Exchange of the number of particles depending on cooling time in glass tempering process using multiple air jets with small nozzle distance[C]. 7th International Advanced Technologies Symposium (IATS’13), Istanbul, Turkey, 2013: 313319.
[30] KHANGEMBAM C, SINGH D, HANDIQUE J, et al. Experimental and numerical study of airwater mist jet impingement cooling on a cylinder[J]. International Journal of Heat and Mass Transfer, 2020, 150: 119368.