Effect of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melted 18Ni300 Maraging Steel

Chao Xiang; Tao Zhang; Wenwei Wu; Zhihang Zou; Yongfei Sun; Jinpeng Liu; Xiaolei Xu; Enhou Han

doi:10.3788/CJL231183

[1] Lewandowski J J, Seifi M. Metal additive manufacturing: a review of mechanical properties[J]. Annual Review of Materials Research, 46, 151-186(2016).

[2] Zheng Z J, Mao L Y, Dong Z H. Effect of microstructural anisotropy on corrosion resistance of 316L stainless steel prepared by additive manufacturing[J]. Chinese Journal of Lasers, 50, 0402012(2023).

[3] Tian X Y, Wu L L, Gu D D et al. Roadmap for additive manufacturing: toward intellectualization and industrialization[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100014(2022).

[4] Jiang H Y, Lin W K, Wu S B et al. Application status and development trend of laser selective melting technology[J]. Mechanical Engineering & Automation, 223-226(2019).

[5] Yang Y Q, Wu W H, Lai K X et al. Newest progress of direct rapid prototyping of metal part by selective laser melting[J]. Aeronautical Manufacturing Technology, 49, 73-76, 97(2006).

[6] Zhou Y Y, Wang F, Xue C. Microstructure and mechanical properties of 3D printing 18Ni300 die steel[J]. Physical Testing and Chemical Analysis (Physical Testing), 52, 243-246(2016).

[7] Guo W F, Guo C, Zhu Q. Heat treatment behavior of the 18Ni300 maraging steel additively manufactured by selective laser melting[J]. Materials Science Forum, 941, 2160-2166(2018).

[8] Mei X Y, Yan Y, Fu H D et al. Effect of aging temperature on microstructure evolution and strengthening behavior of L-PBF 18Ni300 maraging steel[J]. Additive Manufacturing, 58, 103071(2022).

[9] Li H, Zhao W J, Li R D et al. Progress on additive manufacturing of maraging steel[J]. Chinese Journal of Lasers, 49, 1402102(2022).

[10] Guan H, Wang X X, Dong Z J et al. Research on 3D printing process of 18Ni300 die steel powder[J]. Die and Mould Technology, 1-6(2020).

[11] Li S C, Mo B, Xiao G et al. Microstructure characteristics and their influence factors during laser additive manufacturing of metal materials[J]. Laser & Optoelectronics Progress, 58, 0100007(2021).

[12] Mao Z F, Lu X D, Yang H R et al. Processing optimization, microstructure, mechanical properties and nanoprecipitation behavior of 18Ni300 maraging steel in selective laser melting[J]. Materials Science and Engineering: A, 830, 142334(2022).

[13] Dong F Y, Hou J F. Effect of heat treatment on mechanical properties of SLM 18Ni300 maraging steel[J]. Chinese Journal of Vacuum Science and Technology, 41, 562-565(2021).

[14] Liu Z B, Yang Z Y, Liang J X et al. Growth behavior and precipitation of reverted austenite in ultra-high strength marageing stainless steel[J]. Heat Treatment of Metals, 35, 11-15(2010).

[15] Jin Y. Research on microstructures and properties of selective laser melting 18Ni300 and heat treatment[D], 6(2019).

[16] Bai Y C, Zhao C L, Wang D et al. Evolution mechanism of surface morphology and internal hole defect of 18Ni300 maraging steel fabricated by selective laser melting[J]. Journal of Materials Processing Technology, 299, 117328(2022).

[17] Chen B, Huang Y, Gu T et al. Investigation on the process and microstructure evolution during direct laser metal deposition of 18Ni300[J]. Rapid Prototyping Journal, 24, 964-972(2018).

[18] Xu D Y, Chen W Q, Wan J F et al. Effect of aging temperature on microstructure and mechanical properties of SLM 18Ni300 maraging steel[J]. Heat Treatment of Metals, 48, 144-150(2023).

[19] Zhu J, Zhao Y W, Pan T X et al. Investigation on reverse austenite in 18Ni(250 grade) maraging steel[J]. Iron and Steel, 16, 41-45(1981).

[20] Casati R, Lemke J, Tuissi A et al. Aging behaviour and mechanical performance of 18-Ni 300 steel processed by selective laser melting[J]. Metals, 6, 218(2016).

[21] Kempen K, Yasa E, Thijs L et al. Microstructure and mechanical properties of selective laser melted 18Ni-300 steel[J]. Physics Procedia, 12, 255-263(2011).