[1] TAO CH H, ZHONG P D, WANG R ZH, et al.. Failure Analysis and Prevention for Rotor in Aero-engine［M］. Beijing: National Defense Industry Press, 2000. (in Chinese)

[2] CHEN Y T, ZHU M CH, TONG S R, et al.. Image measuring system and its calibration of aero engine tip clearance［J］. Journal of Applied Optics, 2013, 34(3): 473-478. (in Chinese)

[3] WANG K, DUAN F J, GUO H T, et al.. Blade tip clearance measurement using dual frequency laser with large frequency difference［J］. Journal of Optoelectronics·Laser , 2013, 24(10): 1984-1988. (in Chinese)

[4] RZADKOWSKI.R, ROKICKI.E, PIECHOWSKI.L, et al.. Analysis of middle bearing failure in rotor jet engine using tip-timing and tip-clearance techniques［J］. Mechanical Systems and Signal Processing, 2016, 76: 213-227.

[5] ZHANG X D, XIE S Y, NIU H, et al.. Research on dynamic measurement technology of fiber optic sensors and their development［J］. Journal of Vibration, Measurement & Diagnosis, 2015, 35(3): 409-416. (in Chinese)

[6] ZHANG X D, GUO Q, NIU H. Optical fiber measurement system for thickness of water film［J］.Opt. Precision Eng., 2015, 23(10): 2747-2754. (in Chinese)

[7] JIA B H, FENG Y, JIA W H. Application of optical sensor with two-circle reflective coaxial fiber in tip clearance measurement［J］. Laser & Optoelectronics Progress, 2015, 52(10): 100603. (in Chinese)

[8] GIL-GARCA J M, SOLS A, ARANGUREN G, et al.. An architecture for on-line measurement of the tip clearance and time of arrival of a bladed disk of an aircraft engine［J］. Sensors, 2017, 17(10): 1-15.

[9] MA Y ZH, DUAN F J, WANG ZH, et al.. Application of optical fiber sensor in tip clearance measurement［J］. Chinese Journal of Sensors and Actuators, 2007, 20(12): 2724-2727. (in Chinese)

[10] BI CH, FANG J G, SONG T T, et al.. Establish of optical measuring system for blade edges［J］.Opt. Precision Eng., 2017, 25(10): 2744-2751. (in Chinese)

[11] FEI T, ZHANG X D, XIE S Y. Research on variation mechanism of three-dimensional blade tip clearance of aero-engine［C］. 13th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), Xian, P.R. China: IEEE, 2016: 1-6.

[12] XIE S Y, ZHANG X D.Design and modeling of three-dimensional tip-clearance optical probe based on two-circle reflective coaxial fiber bundle［C］. 2016 IEEE International Conference on Sensors, Orlando, USA: IEEE, 2016: 1-3.

[13] XIE S Y, ZHANG X D. Three-dimensional output behavior of displacement sensor of two-circle reflective coaxial fiber bundle［J］. Journal of Vibration, Measurement & Diagnosis, 2017, 37(1): 174-180, 207. (in Chinese)

[14] XU F. Structural Design and Decoupling Research of a Novel Three-dimensional Force Flexible Tactile Sensor［D］. Hefei: University of Science and Technology of China, 2011. (in Chinese)

[15] LI Y J, HAN B B, WANG G C, et al.. Decoupling algorithms for piezoelectric six-dimensional force sensor based on RBF neural network［J］.Opt. Precision Eng., 2017, 25(5): 1266-1271. (in Chinese)

[16] WU Y H, XIE X J, SUN H L. research on measurement system for blade tip clearance based on microwave［J］. Metrology & Measurement Technology, 2016, 36(6): 37-39, 42. (in Chinese)

[17] ZHEN CH, ZHU M CH. Application of image measuring technology in blade tip clearance measurement［J］. Journal of Applied Optics, 2014, 35(5): 835-840. (in Chinese)