[2] SHI ZH Y, TANG J, WEI H L, et al.. Gear in-line measuring machine based on double-flank gear rolling test with multi-degrees of freedom[J]. Chinese Journal of Scientific Instrument,2009, 30(2): 303-307.(in Chinese)
[3] HARTIG F, KECK C, KNIEL K. An novel high accuracy concept for gear calibration[J]. Gear Technology, 2005,5-6: 16-20.
[4] BEYER W, PAHL W. Advanced strategies for the traceable calibration of cylindrical gears and bebel gears at PTB[J]. VDI Berichte, 1996, 1230: 937-945.
[5] FURMI T, MASAHARU K, AIZOH K, et al.. High-precision measurement of an involute artefact by a rolling method and comparison between measuring instruments[J]. Measurement Science and Technology, 2009, 20: 1-12.
[6] TAKEOKA F, KOMORI M, KUBO A, et al.. Design of laser interferometric measuring device of involute profile[J]. J. Mech. Des., 2008, 130: 052602.
[7] LOU ZH F,WANG L D,ZHANG Y L, et al.. Adjustment of probe in double-disc involute measuring instrument[J]. Opt. Precision Eng., 2007, 15(10): 980-985. (in Chinese)
[8] LOU ZH F, WANG L D, MA Y, et al.. Data acquisition and control system of double-disc involute measurement instrument[J]. Chinese Journal of Scientific Instrument, 2009, 30(1): 61-64. (in Chinese)
[9] WANG L D, LOU ZH F, MA Y, et al..Accuracy analysis of the double-disc instrument for measuring involute[J]. Jilang Xuebao, 2009, 30(5): 393-398. (in Chinese)
[10] SUN L H. Sliding friction in rolling motion[J]. Journal of Daqing Petroleum Institute, 1990,14(1): 101-104. (in Chinese)