[1] ZHU Y W, WANG CH, XU J, et al.. Influence of pore distribution of fixed abrasive pad on its machining performance ［J］. Opt. Precision Eng., 2014, 22(4): 911-917. (in Chinese)

[2] JU ZH L, ZHU Y W, WANG J B, et al.. Effect of slurries on chemical mechanical polishing of decorative glasses by fixed- abrasive pad ［J］. Opt. Precision Eng., 2013, 21(4): 955-962. (in Chinese)

[3] JI SH M, TANG B, TAN D P, et al.. Structured surface softness abrasive flow precision finish machining and its abrasive flow dynamic numerical analysis ［J］. Chinese Journal of Mechanical Engineering, 2010, 46(15): 178-184. (in Chinese)

[4] JI SH M, LI CH, TAN D P, et al.. Study on machinability of softness abrasive flow based on preston equation ［J］. Chinese Journal of Mechanical Engineering, 2011, 47(17): 156-163. (in Chinese)

[5] RAVI SANKAR M, JAIN V K, RAMKUMA J, et al.. Rheological characterization of styrene-butadiene based medium and its finishing performance using rotational abrasive flow finishing process［J］. International Journal of Machine Tools and Manufacture, 2011, 51: 947-957.

[6] RHOADES L J. Abrasive flow machining: a case study ［J］. Journal of Material Processing Technology, 1991, 28: 107-116.

[7] LOVELESS T R, WILLIAMS R E, RAJURKAR K P. A study of the effects of abrasive flow finishing on various machined surfaces［J］. Journal of Material Processing Technology, 1994, 47: 133-151.

[8] WILLIAMS R E, RAJURKAR K P. Stochastic modeling and analysis of abrasive flow machining［J］. Journal of Engineering for Industry(Transactions of the ASME), 1992, 114: 74-81.

[9] WILLIAMS R E. Acoustic emission characteristics of abrasive flow machining ［J］. Transactions of the ASME120, 1998,264-271.

[10] JI SH M, MA B L, TAN D P, et al.. Numerical analysis of soft abrasive flow in structured restraint flow passage ［J］. Opt. Precision Eng., 2011, 19(9): 2092-2099.(in Chinese)

[11] DING J F, ZHANG K H, XU Y CH, et al.. Abrasive flow homogenization polishing method and processing experiment for cycloidal pump Inner rotor ［J］. Journal of Drainage and Irrigation Machinery Engineering, 2013, 31(7): 45-53.(in Chinese)

[12] HUANG W X, LI J M, XIAO Z Y. Engineering Fluid Mechanics［M］. Beijing: Chemical Industry Press, 2011. (in Chinese)

[13] DONG ZH G, YA G, LI Y Z. Analysis of wall sliding characteristics about abrasive flow carrier in pipe ［J］. Journal of Taiyuan University of Technology,2011, 42(2): 160-163.(in Chinese)

[14] DONG ZH G, YA G, SONG G ZH, et al.. Influence of viscoelasticity on grinding effect in abrasive flow machining ［J］. Diamond & Abrasives Engineering, 2010, 30(6): 82-85. (in Chinese)

[15] BHARAT BHUSHAN, GE SH R. Introduction of Tribology［M］. Beijing: Machinery Industry Press, 2007. (in Chinese)