• APPLIED LASER
  • Vol. 43, Issue 1, 18 (2023)
Shi Jipeng1,*, Zang Xu2, Fan Yu1, Jiang Wentong1..., Guan Feng1 and Zhao Xingwang1|Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.14128/j.cnki.al.20234301.018 Cite this Article
    Shi Jipeng, Zang Xu, Fan Yu, Jiang Wentong, Guan Feng, Zhao Xingwang. Study of Laser Welding and TIG Filler Welding Process of Titanium Alloy Sheet with Diffusion Bonding Forming[J]. APPLIED LASER, 2023, 43(1): 18 Copy Citation Text show less

    Abstract

    Aiming at the welding technology of TC4 titanium alloy formed by diffusion bonding with a thickness of (2.0+1.5) mm, the laser welding and TIG filler wire welding process research were carried out. The joints of the two welding methods were subjected to post-weld heat treatment at 650 ℃ to relieve stress. The microstructure of the joints of each method is analyzed, and the mechanical properties of the joints are tested. Results show that the two welding methods can obtain well-formed joints with appropriate processes. Compared with argon arc welding, the crystal grains of laser welding joints are smaller, and α′ phase is more. Laser welding shear strength and tensile properties parallel to the weld are higher than argon arc welding, but the bending strength and tensile properties perpendicular to the weld are lower than argon arc welding.
    Shi Jipeng, Zang Xu, Fan Yu, Jiang Wentong, Guan Feng, Zhao Xingwang. Study of Laser Welding and TIG Filler Welding Process of Titanium Alloy Sheet with Diffusion Bonding Forming[J]. APPLIED LASER, 2023, 43(1): 18
    Download Citation