[1] Babu S S, Raghavan N, Raplee J et al. Additive manufacturing of nickel superalloys: opportunities for innovation and challenges related to qualification[J]. Metallurgical and Materials Transactions A, 49, 3764-3780(2018).
[2] Chen Y T, Yeh A C, Li M Y et al. Effects of processing routes on room temperature tensile strength and elongation for Inconel 718[J]. Materials & Design, 119, 235-243(2017).
[3] Zhang G H, Guo S Q, Huang S et al. Relative density of GH4169 superalloy prepared by selective laser melting[J]. Laser & Optoelectronics Progress, 57, 031404(2020).
[4] He B, Wang C, Sun C Q et al. Effect of substrate preheating on microstructure and properties of laser-deposited TA15/GH4169 composite structure[J]. Chinese Journal of Lasers, 47, 0102002(2020).
[5] Huang S, Guo S Q, Zhang G H et al. Microstructure and impact toughness of GH4169 samples fabricated by selective laser melting[J]. Laser & Optoelectronics Progress, 57, 051405(2020).
[6] Du J H, Lu X D, Deng Q et al. High-temperature structure stability and mechanical properties of novel 718 superalloy[J]. Materials Science and Engineering: A, 452/453, 584-591(2007).
[7] Du J H, Lu X D, Qu J L et al. Microstructure and mechanical properties of novel 718 superalloy[J]. Acta Metallurgica Sinica (English Letters), 19, 418-424(2006).
[8] Wang L H, Liu Z L, Liu X Q et al. Effects of Al and Ti contents on the microstructure and solidification behavior of cast Inconel 718[J]. Journal of Materials Science and Engineering, 34, 242-247, 264(2016).
[9] Zhou X S, He Y B, Liu J H et al. Effect of Al content on delta phase microstructure evolution in Inconel 718 alloys[J]. Ordnance Material Science and Engineering, 35, 74-77(2012).
[10] Liu F, Sun W R, Yang S L et al. Effects of al content on microstructure and stability of GH4169 nickel base alloy[J]. Acta Metallurgica Sinica, 44, 791-798(2008).
[11] Liu F, Sun W R, Yang S L et al. Effect of Al on the tensile properties of IN718 alloys[J]. Rare Metal Materials and Engineering, 37, 1046-1050(2008).
[12] Moussaoui K, Rubio W, Mousseigne M et al. Effects of selective laser melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties[J]. Materials Science and Engineering: A, 735, 182-190(2018).
[13] Qin L Y, Wu J B, Wang W et al. Microstructures and fatigue properties of Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V titanium alloy fabricated using laser deposition manufacturing[J]. Chinese Journal of Lasers, 47, 1002008(2020).
[14] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).
[15] Ren H, Liu F C, Lin X et al. Microstructure of Nb alloyed GH4169 superalloy prepared by laser additive manufacturing[J]. Rare Metal Materials and Engineering, 48, 3289-3296(2019).
[16] Liu F C, Ren H, Wang X G et al. Dendritic segregation of Nb modified GH4169 superalloy fabricated by laser additive manufacturing[J]. Surface Technology, 48, 123-131(2019).
[17] Fu S H, Dong J X, Zhang M C et al. Thermodynamic calculation of the phases precipitation behavior for developing 718 type alloys with high structure stability[J]. Journal of Materials Engineering, 37, 8-13(2009).
[18] Chen J, Zhang Q L, Yao J H et al. Study on laser absorptivity of metal material[J]. Journal of Applied Optics, 29, 793-798(2008).
[19] Zhou Y H, Zhang Z H, Wang Y P et al. Selective laser melting of typical metallic materials: an effective process prediction model developed by energy absorption and consumption analysis[J]. Additive Manufacturing, 25, 204-217(2019).
[20] Aydogan B, O'Neil A, Sahasrabudhe H. Microstructural and mechanical characterization of stainless steel 420 and Inconel 718 multi-material structures fabricated using laser directed energy deposition[J]. Journal of Manufacturing Processes, 68, 1224-1235(2021).
[21] Zhang X F, Li H X, Hu Q D et al. Effect of heat treatment on the microstructure and tensile properties of GH4169 superalloy fabricated by selective laser melting[J]. Aeronautical Manufacturing Technology, 62, 78-85(2019).
[22] Ni M, Chen C, Wang X J et al. Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing[J]. Materials Science and Engineering: A, 701, 344-351(2017).
[23] Gao S F, Liu L, Hu X W et al. Review of freckle defects under directional solidification of nickel-based superalloys[J]. Journal of Materials Science and Engineering, 28, 145-151(2010).
[24] Chen S Y, Li Q, Zhong J et al. On diffusion behaviors in face centered cubic phase of Al-Co-Cr-Fe-Ni-Ti high-entropy superalloys[J]. Journal of Alloys and Compounds, 791, 255-264(2019).
[25] Zhao W W, Lin X, Liu F C et al. Effect of heat treatment on microstructure and mechanical properties of laser solid forming Inconel 718 superalloy[J]. Chinese Journal of Lasers, 36, 3220-3225(2009).
[26] Xie X S, Fu S H, Zhao S Q et al. The precipitation strengthening effect of Nb, Ti and Al in cast/wrought Ni-base superalloys[J]. Materials Science Forum, 638/639/640/641/642, 2363-2368(2010).
[27] Qiao Z, Li C, Zhang H J et al. Evaluation on elevated-temperature stability of modified 718-type alloys with varied phase configurations[J]. International Journal of Minerals, Metallurgy and Materials, 27, 1123-1132(2020).
[28] Knorovsky G A, Cieslak M J, Headley T J et al. Inconel 718: a solidification diagram[J]. Metallurgical Transactions A, 20, 2149-2158(1989).