[1] ZHENG L G, ZHANG X J, ZHANG F. NC surfacing of two off-axis aspheric mirrors［J］. Opt. Precision Eng.，2004，12(1): 113-117. (in Chinese)

[2] LI R G, ZHENG L G, ZHANG F, et al.. Computer controlled manufacturing during fine grinding stage of highly steep off-axis asphere with large aperture ［J］. Opt. Precision Eng., 2007，15(5): 633-639.(in Chinese)

[3] OUYANG M A．Study of ultra-precision vertical grinding for aspheric lens mould［J］．Opt．Precision Eng．，2006，14(4)：545-552．(in Chinese)

[4] WANG G L. A study on key techniques in ultra-precision lapping and polishing for optical SiC materials ［D］.Beijing: Graduate University of the Chinese Academy of Sciences, 2002.(in Chinese)

[5] CHENG H B, ZHANG X J, ZHENG L G, et al.. Optimizing the moving-orbit for off-axis aspheric manufacturing and test ［J］. Optical Technique, 2003，29(2): 247-249. (in Chinese)

[6] WANG P, LI J F, XUAN B, et al.. Double-swing method used for polishing off-axis aspherical mirrors［J］. SPIE, 2009,7282: 728203.

[7] ZHAO W X, ZHANG G, ZHAO R CH, et al..Fabrication of silicon carbide lightweight mirror blank［J］. Opt. Precision Eng.,2011，19(11): 2609-2617.(in Chinese)

[8] DENG W J, ZHENG L G, SHI Y L,et al.. Adaptive programming algorithm for generating polishing tool-path in computer controlled optical surfacing［J］. Opt. Precision Eng., 2009，17(1): 65-71.(in Chinese)

[9] KIM D W, KIM S W.Static tool influence function for fabrication simulation of hexagonal mirror segments for extremely large telescopes［J］. Optics Express, 2005, 13(3): 910-917.

[10] SONG C,WALKER D, YU G Y. Misfit of rigid tools and interferometer subapertures on off-axis aspheric mirror segments［J］. Optics Engineering, 2011,50(7): 073401.