Review on the Fabrication and Optical Performance of ZnS Bulk Materials

Shaohua WU; Jingsong ZHAO; Yuejin ZHAO; Weisheng YANG; Jie JIANG; Maozhong LI; Rukun DONG; Tingting MU; Lihe ZHENG

[1] Tran T K, Park W, Tong W, et al. Photoluminescence properties of ZnS epilayers[J]. Journal of Applied Physics, 1997, 81(6): 2803-2809.

[2] LIU X, ZHU J, HAN J. Numerical and experimental investigation on thermal shock failure of Y2O3-coated CVD ZnS infrared windows[J]. International Journal of Heat and Mass Transfer, 2018, 124: 124-130.

[3] QU Z, CHENG X, HE R, et al. Rapid heating thermal shock behavior study of CVD ZnS infrared window material: numerical and experimental study[J]. Journal of Alloys and Compounds, 2016, 682: 565-570.

[4] LIN Z, WANG G, LI L, et al. Preparation and protection of ZnS surface sub-wavelength structure for infrared window[J]. Applied Surface Science, 2019, 470: 395-404.

[5] Gavrishchuk E M, Yashina ? V. Zinc sulfide and zinc selenide optical elements for IR engineering[J]. Journal of Optical Technology, 2004, 71(12): 822.

[6] LIU Y, HE Y, YUAN Z, et al. Numerical and experimental study on thermal shock damage of CVD ZnS infrared window material[J]. Journal of Alloys and Compounds, 2014, 589: 101-108.

[7] Chmel A, Dunaev A, Shcherbakov I, et al. Luminescence from impact- and abrasive-damaged ZnS ceramics[J]. Procedia Structural Integrity, 2018, 9: 3-8.

[8] FANG X, ZHAI T, Gautam U K, et al. ZnS nanostructures: from synthesis to applications[J]. Progress in Materials Science, 2011, 56(2): 175-287.

[9] Harris D C. Frontiers in infrared window and dome materials[C]//Infrared Technology XXI. International Society for Optics and Photonics, 1995, 2552: 325-335.

[10] Klein C A, DiBenedetto B, Kohane T. Chemically vapor-deposited zinc sulfide infrared windows: optical properties and physical characteristics[C]//Proceedings of the Society of Photo-Optical Instrumentation Engineers, 1979, 204: 85-94.

[11] Yashina E V. Preparation and properties of polycrystalline ZnS for IR applications[J]. Neorganicheskie Materialy, 2003, 39(7): 663-668.

[13] Nelson J, Gould A, Smith N, et al. Advances in freeform optics fabrication for conformal window and dome applications [C]//Proc. of SPIE, 2013, 8708: 870815-1-10.

[14] Lauck R. Chemical vapor transport of zinc sulfide: Part I: Isotopic crystals from nearly stoichiometric vapor phase[J]. Journal of Crystal Growth, 2010, 312(24): 3642-3649.

[15] Ujiie S, Kotera Y. The growth of cubic zinc sulfide crystals by the chemical transport method[J]. Journal of Crystal Growth, 1971, 10(4): 320-322.

[16] Dangel P N, Wuensch B J. Growth of zinc sulfide by iodine transport[J]. Journal of Crystal Growth, 1973, 19(1): 1-4.

[17] De A K, Muralidhar K, Eswaran V, et al. Modelling of transport phenomena in a low-pressure CVD reactor[J]. Journal of Crystal Growth, 2004, 267(3-4): 598-612.

[18] Ooshita K, Inoue T, Sekiguchi T, et al. Flux growth of ZnS single crystals and their characterization[J]. Journal of Crystal Growth, 2004, 267(1-2): 74-79.

[19] LI Y, WU Y. Transparent and luminescent ZnS ceramics consolidated by vacuum hot pressing method[J]. Journal of the American Ceramic Society, 2015, 98(10): 2972-2975.

[20] LU C, PAN Y, KOU H, et al. Densification behavior, phase transition, and preferred orientation of hot-pressed ZnS ceramics from precipitated nanopowders[J]. Journal of the American Ceramic Society, 2016, 99(9): 3060-3066.

[21] Chlique C, Delaizir G, Merdrignac-Conanec O, et al. A comparative study of ZnS powders sintering by hot uniaxial pressing (HUP) and spark plasma sintering (SPS)[J]. Optical Materials, 2011, 33(5): 706-712.

[22] Chlique C, Merdrignac-Conanec O, Hakmeh N, et al. Transparent ZnS ceramics by sintering of high purity monodisperse nanopowders[J]. Journal of the American Ceramic Society, 2013, 96(10): 3070-3074.

[23] LI C, XIE T, DAI J, et al. Hot-pressing of zinc sulfide infrared transparent ceramics from nanopowders synthesized by the solvothermal method[J]. Ceramics International, 2018, 44(1): 747-752.

[24] CHEN Y, ZHANG L, ZHANG J, et al. Fabrication of transparent ZnS ceramic by optimizing the heating rate in spark plasma sintering process[J]. Optical Materials, 2015, 50: 36-39.

[25] Kirchner H P, Tiracorda J A, Larchuk T J. Contact damage in hot‐pressed and chemically‐vapor‐deposited zinc sulfide[J]. Journal of the American Ceramic Society, 1984, 67(9): C-188-C-190.

[26] Zscheckel T, Wisniewski W, Gebhardt A, et al. Mechanisms counteracting the growth of large grains in industrial zns grown by chemical vapor deposition [J]. Acs Applied Materials & Interfaces, 2014, 6(1): 394-400.

[27] Goela J S, Taylor R L. Monolithic material fabrication by chemical vapour deposition[J]. Journal of Materials Science, 1988, 23(12): 4331-4339.

[28] Sharifi Y, Achenie L E K. Effect of substrate geometry on the deposition rate in chemical vapor deposition[J]. Journal of Crystal Growth, 2007, 304(2): 520-525.

[29] McCloy J, Fest E, Korenstein R, et al. Anisotropy in structural and optical properties of chemical vapor deposited ZnS[C]//Window and Dome Technologies and Materials XII, International Society for Optics and Photonics, 2011, 8016: 80160I-1-11.

[30] LI Y, WU Y. Transparent and luminescent ZnS ceramics consolidated by vacuum hot pressing method[J]. Journal of the American Ceramic Society, 2015, 98(10): 2972-2975.

[31] LIU M, WANG S, WANG C, et al. Understanding of electronic and optical properties of ZnS with high concentration of point defects induced by hot pressing process: The first-principles calculations[J]. Computational Materials Science, 2020, 174: 109492-1-7.

[32] Lee K, Choi B, Woo J, et al. Microstructural and optical properties of the ZnS ceramics sintered by vacuum hot-pressing using hydrothermally synthesized ZnS powders[J]. Journal of the European Ceramic Society, 2018, 38(12): 4237-4244.

[33] HONG J, Jung W K, Choi D H. Effect of porosity and hexagonality on the infrared transmission of spark plasma sintered ZnS ceramics[J]. Ceramics International, 2020, 46(10): 16285-16290.

[34] LI Y, ZHANG L, Kisslinger K, et al. Green phosphorescence of zinc sulfide optical ceramics[J]. Optical Materials Express, 2014, 4(6): 1140-1150.

[35] LI Y, TAN W, WU Y. Phase transition between sphalerite and wurtzite in ZnS optical ceramic materials[J]. Journal of the European Ceramic Society, 2020, 40(5): 2130-2140.

[36] Yeo S, Kwon T, Park C, et al. Sintering and optical properties of transparent ZnS ceramics by pre-heating treatment temperature[J]. Journal of Electroceramics, 2018(41): 1-8.

[38] FANG Z, CHAI Y, HAO Y, et al. CVD growth of bulk polycrystalline ZnS and its optical properties[J]. Journal of Crystal Growth, 2002, (237-239): 1707-1710.

[41] McCloy J, Tustison R. Chemical Vapor Deposited Zinc Sulfide[M]. Washington: SPIE Press, 2013.

[42] WU S, ZHAO J, ZHAO Y, et al. Preparation, composition, and mechanical properties of CVD polycrystalline ZnS[J]. Infrared Physics & Technology, 2019, 98: 23-26.

[45] YANG H, ZHANG P, JIANG L, et al. Study on the twins and textures in CVDZnS[J]. Applied Physics A-Materials Science & Processing, 2020, 126(2): 59-65.

[46] WEI N, YANG H, YANG D, et al. Recrystallization mechanism of abnormal large grains during long growth of CVD-ZnS[J]. Journal of Crystal Growth, 2019, 517: 48-53.

[47] WU S, ZHAO J, ZHAO Y J, et al. Preparation and optical properties of transparent polycrystalline ZnS bulk materials[C]//Proc. of SPIE, 2018, 10826: 108261I.

[48] Harris D. Thermal, structural, and optical properties of Cleartran? multispectral zinc sulfide[J]. Optical Engineering, 2008, 47(11): 114001.

[49] Harris D. Development of hot-pressed and chemical-vapor-deposited zinc sulfide and zinc selenide in the United States for optical windows [C]//Proc. of SPIE, 2007, 6545: 654502.

[50] Yashina E V, Gavrishchuk E M, Ikonnikov V B. Mechanisms of polycrystalline CVD ZnS densification during hot isostatic pressing[J]. Inorganic Materials, 2004, 40(9): 901-904.

[51] Ramavath P, Biswas P, Johnson R, et al. Hot isostatic pressing of ZnS powder and CVD ZnS ceramics: comparative evaluation of physico -chemical, microstructural and transmission properties[J]. Transactions of the Indian Ceramic Society, 2014, 73(4): 299-302.

[52] Ramavath P, Mahender V, Hareesh U, et al. Fracture behaviour of chemical vapour deposited and hot isostatically pressed zinc sulphide ceramics[J]. Materials Science and Engineering A, 2011, 528: 5030-5035.

[53] Shchurov A F, Gavrishchuk E M, Ikonnikov V B. Effect of hot isostatic pressing on the elastic and optical properties of polycrystalline CVD ZnS[J]. Inorganic Materials, 2004, 40(4): 400-403.

[54] Biswas P, Kumar R, Ramavath P. Effect of post-CVD thermal treatments on crystallographic orientation, microstructure, mechanical and optical properties of ZnS ceramics[J]. Journal of Alloys and Compounds, 2010, 496: 273-277.

[55] LI G, WEI N, YANG H, et al. Structural, morphological, optical properties of CVDZnS and HIPZnS[J]. Applied Physics A, Materials Science & Processing, 2020, 126(108): 1-7.

[56] McCloy J S, Korenstein R, Zelinski B. Effects of temperature, pressure, and metal promoter on the recrystallized structure and optical transmission of chemical vapor deposited zinc sulfide[J]. Journal of the American Ceramic Society, 2009, 92(8): 1725-1731.