[1] Horn T J and Harrysson O L A 2012 Overview of current additive manufacturing technologies and selected applications Sci. Prog. 95 255–82

[2] Guo N N and Leu M C 2013 Additive manufacturing: technology, applications and research needs Front. Mech. Eng. 8 215–43

[3] Yang J J, Han J, Yu H C, Yin J, Gao M, Wang Z M and Zeng X Y 2016 Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy Mater. Des. 110 558–70

[4] Collins P C, Brice D A, Samimi P, Ghamarian I and Fraser H L 2016 Microstructural control of additively manufactured metallic materials Annu. Rev. Mater. Res. 46 63–91

[5] Tan J H K, Sing S L and Yeong W Y 2020 Microstructure modelling for metallic additive manufacturing: a review Virtual Phys. Prototyp. 15 87–105

[6] Kathuria Y P 2001 Overview of laser-based rapid prototyping in a microdomain Proc. of SPIE 4157, Laser-Assisted Microtechnology 2000 (St. Petersburg-Pushkin, Russian Federation: SPIE) pp 129–34

[7] Vaezi M, Chianrabutra S, Mellor B and Yang S F 2013 Multiple material additive manufacturing—part 1: a review Virtual Phys. Prototyp. 8 19–50

[8] Bourell D L, Marcus H L, Barlow J W, Beaman J J and Deckard C R 1990 Multiple material systems for selective beam sintering. U. S. Patent No. 5, 382, 308

[9] Ligon S C, Liska R, Stampfl J, Gurr M and Mülhaupt R 2017 Polymers for 3D printing and customized additive manufacturing Chem. Rev. 117 10212–90

[10] Zenou M, Sa’Ar A and Kotler Z 2015 Laser transfer of metals and metal alloys for digital microfabrication of 3D objects Small 11 4082–9

[11] Liu R, Wang Z, Sparks T, Liou F and Newkirk J 2017 Aerospace applications of laser additive manufacturing Laser Additive Manufacturing: Materials, Design, Technologies, and Applications, ed M Brandt (Amsterdam: Elsevier) p 498

[12] Zuback J S, Palmer T A and DebRoy T 2019 Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys J. Alloys Compd. 770 995–1003

[13] Chen Y T and Liou F 2018 Additive manufacturing of metal functionally graded materials: a review Proc. of the 29th Annual Int. Solid Freeform Fabrication Symp. (Dallas, TX: Laboratory for Freeform Fabrication and University of Texas at Austin)

[14] Yan L, Chen Y T and Liou F 2020 Additive manufacturing of functionally graded metallic materials using laser metal deposition Addit. Manuf. 31 100901

[15] Mahmoud D and Elbestawi M A 2017 Lattice structures and functionally graded materials applications in additive manufacturing of orthopedic implants: a review J. Manuf. Mater. Process 1 1–19

[16] Bandyopadhyay A and Heer B 2018 Additive manufacturing of multi-material structures Mater. Sci. Eng. R 129 1–16

[17] Sharratt B and Bree M 2015 Non-destructive techniques and technologies for qualification of additive manufactured parts and processes: a literature review Report

[18] Grasso M and Colosimo B M 2017 Process defects and in situ monitoring methods in metal powder bed fusion: a review Meas. Sci. Technol. 28 044005

[19] Sun S, Brandt M and Easton M 2017 2—Powder bed fusion processes: an overview Laser Additive Manufacturing: Materials, Design, Technologies, and Applications, ed M Brandt (Amsterdam: Elsevier) pp 55–77

[20] Wei C, Gu H, Sun Z, Cheng D X, Chueh Y H, Zhang X J, Huang Y H and Li L 2019 Ultrasonic material dispensing-based selective laser melting for 3D printing of metallic components and the effect of powder compression Addit. Manuf. 29 100818

[21] Binder M, Anstaett C, Horn M, Herzer F, Schlick G, Seidel C, Schilp J and Reinhart G 2018 Potentials and challenges of multi-material processing by laser-based powder bed fusion Proc. of the 29th Annual Int. Solid Freeform Fabrication Symp.—An Additive Manufacturing Conf. pp 376–87

[22] Loh G H, Pei E, Harrison D and Monz′on M D 2018 An overview of functionally graded additive manufacturing Addit. Manuf. 23 34–44

[23] Wei C, Li L, Zhang X J and Chueh Y-H 2018 3D printing of multiple metallic materials via modified selective laser melting CIRP Ann. 67 245–8

[24] Gibson I, Rosen D and Stucker B 2015 Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing 2nd (Berlin: Springer) (https://doi.org.10. 1007/978-1-4939-2113-3)

[25] Liu Z H, Zhang D Q, Sing S L, Chua C K and Loh L E 2014 Interfacial characterization of SLM parts in multi-material processing: metallurgical diffusion between 316L stainless steel and C18400 copper alloy Mater. Charact. 94 116–25

[26] Mahamood R M and Akinlabi E T 2015 Laser metal deposition of functionally graded Ti6Al4V/TiC Mater. Des. 84 402–10

[27] Stichel T, Laumer T, Linnenweber T, Amend P and Roth S 2016 Mass flow characterization of selective deposition of polymer powders with vibrating nozzles for laser beam melting of multi-material components Phys. Procedia 83 947–53

[28] Chianrabutra S 2015 A Dry Powder Micro Delivery Device for Multiple Material Additive Manufacturing (Southampton: University of Southampton)

[29] Al-Jamal O M, Hinduja S and Li L 2008 Characteristics of the bond in Cu-H13 tool steel parts fabricated using SLM CIRP Ann. 57 239–42

[30] Seidel C and Ansttt C 2016 Next step in laser-based powder bed fusion—multi material processing Laser Tech. J. 13 2–5

[31] Schein L B 1988 Electrophotography and Development Physics (Berlin: Springer)

[32] Kumar A V and Zhang H 1999 Electro photographic powder deposition for freeform fabrication Proc. of 10th Solid Freeform Fabrication pp 647–54

[33] Kumar A V, Anirban D and James F 2003 Solid freeform fabrcation by electrophotographic printing Proc. of the 14th Solid Freeform Fabrication Symp. (available at: http://utwired.engr.utexas.edu/lff/symposium/preceedings Archive/Manuscripts/2003/2003-04-Kumar.pdf ) pp 39–49

[34] Benning M J and Dalgarno K 2018 Proof of concept of a novel combined consolidation and transfer mechanism for electrophotographic 3D printing Rapid Prototyp. J. 24 1040–8

[35] van der Eijk C, Mugaas T, Karlsen R, seb O, Kolnes and Skjevdal R 2014 Metal printing process development of a new rapid manufacturing process for metal parts Proc. of World PM2004 Conf. (Vienna) pp 19860–70

[36] Stichel T, Geiler B, Jander J, Laumer T, Frick T and Roth S 2018 Electrophotographic multi-material powder deposition for additive manufacturing J. Laser Appl. 30 032306

[37] Stichel T, Brachmann C, Raths M, Dechet M A, Schmidt J, Peukert W, Frick T and Roth S 2020 Electrophotographic multilayer powder pattern deposition for additive manufacturing JOM 72 1366–75

[38] Santosa J, Jing D J and Das S 2002 Experimental and numerical study on the flow of fine powders from small-scale hoppers applied to SLS multi-material deposition–Part I Proc. of the Int. Solid Freeform Fabrication Symp. (Texas: The University of Texas at Austin) (available at: http://edge.rit.edu/edge/ P10551/public/SFF/SFF2002Proceedings/2002 SFFPapers/70-Santos.pdf/2002/2002-70-Santos.pdf) pp 620–7

[39] Kumar P, Santosa J K, Beck E and Das S 2004 Direct-write deposition of fine powders through miniature hopper-nozzles for multi-material solid freeform fabrication Rapid Prototyp. J. 10 14–23

[40] Lappo K, Wood K, Bourell D and Beaman J 2003 Discrete multiple material selective laser sintering (M2SLS): nozzle design for powder delivery Proc. of SFF Symp. pp 93–108

[41] Pegna J, Pattofatto S, Berge R, Bangalan C, Herring H, Lesaux M and Engler J E 1999 Sand-painter: two-dimensional powder deposition Proc. of Solid Freeform Fabrication Symp. pp 695–710

[42] Schneider D 2018 Laser-induced surface acoustic waves for material testing Handbook of Advanced Non-Destructive Evaluation, ed N Ida and N Meyendorf (Cham: Springer International Publishing) pp 1–63

[43] Wei C, Gu H, Zhang X J, Chueh Y H and Li L 2020 Hybrid ultrasonic and mini-motor vibration-induced irregularly shaped powder delivery for multiple materials additive manufacturing Addit. Manuf. 33 101138

[44] Wei C, Sun Z, Chen Q, Liu Z and Li L 2019 Additive manufacturing of horizontal and 3D functionally graded 316L/Cu10Sn components via multiple material selective laser melting J. Manuf. Sci. Eng. 141 1–14

[45] Zhang B B, Jaiswal P, Rai R and Nelaturi S 2018 Additive manufacturing of functionally graded material objects: a review J. Comput. Inf. Sci. Eng. 18 1215–31

[46] Zhang X J, Wei C, Chueh Y-H and Li L 2019 An integrated dual ultrasonic selective powder dispensing platform for three-dimensional printing of multiple material metal/glass objects in selective laser melting J. Manuf. Sci. Eng. 141 1–12

[47] Zhang X J, Chueh Y, Wei C, Sun Z, Yan J W and Li L 2020 Additive manufacturing of three-dimensional metal-glass functionally gradient material components by laser powder bed fusion with in situ powder mixing Addit. Manuf. 33 101113

[48] Chueh Y H, Zhang X J, Ke J C R, Li Q, Wei C and Li L 2020 Additive manufacturing of hybrid metal/polymer objects via multiple-material laser powder bed fusion Addit. Manuf. 36 101465

[49] Chen H-C, Pinkerton A J, Li L, Liu Z and Mistry A T 2011 Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications Mater. Des. 32 495–504

[50] Chen H-C, Pinkerton A J and Li L 2011 Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications Int. J. Adv. Manuf. Technol. 52 977–87

[51] Chen K Y, Wang C, Hong Q F, Wen S F, Zhou Y, Yan C Z and Shi Y S 2020 Selective laser melting 316L/CuSn10 multi-materials: processing optimization, interfacial characterization and mechanical property J. Mater. Process. Technol. 283 116701

[52] Chen J, Yang Y Q, Song C H, Zhang M K, Wu S B and Wang D 2019 Interfacial microstructure and mechanical properties of 316L/CuSn10 multi-material bimetallic structure fabricated by selective laser melting Mater. Sci. Eng. A 752 75–85

[53] Zhang M K, Yang Y Q, Wang D, Song C H and Chen J 2019 Microstructure and mechanical properties of CuSn/18Ni300 bimetallic porous structures manufactured by selective laser melting Mater. Des. 165 107583

[54] Sing S L, Lam L P, Zhang D Q, Liu Z H and Chua C K 2015 Interfacial characterization of SLM parts in multi-material processing : intermetallic phase formation between AlSi10Mg and C18400 copper alloy Mater. Charact. 107 220–7

[55] Anstaett C, Schafnitzel M, Seidel C and Reinhart G 2017 Laser-based powder bed fusion of 3d-multi-material-parts of copper-chrome-zirconia and tool steel Proc. of European Powder Metallurgy Accociation (Milan)

[56] Wei K W, Zeng X Y, Li F Z, Liu M N and Deng J F 2020 Microstructure and mechanical property of Ti-5Al-2.5Sn/Ti-6Al-4V dissimilar titanium alloys integrally fabricated by selective laser melting JOM 72 1031–8

[57] Wang P, Lao C S, Chen Z W, Liu Y K, Wang H, Wendrock H, Eckert J and Scudino S 2020 Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting J. Mater. Sci. Technol. 36 18–26

[58] Hengsbach F et al 2018 Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers Prog. Addit. Manuf. 3 221–31

[59] Nadimpalli V K, Dahmen T, Valente E H, Mohanty S and Pedersen D B 2019 Multi-material additive manufacturing of steels using laser powder bed fusion Proc. of the 19th Int. Conf. and Exhibition (Bilbao, Spain: The European Society for Precision Engineering and Nanotechnology)

[60] Sun Z, Chueh Y H and Li L 2020 Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes Addit. Manuf. 35 101448

[61] Wei C, Gu H, Li Q, Sun Z, Liu Z and Li L 2020 Understanding heat transfer and material behavior in additive manufacturing of functionally graded Invar36/Cu10Sn alloys using multi-materials laser powder bed fusion Addit. Manuf. ADDMA-S-20

[62] Demir A G and Previtali B 2017 Multi-material selective laser melting of Fe/Al-12Si components Manuf. Lett. 11 8–11

[63] Scaramuccia M G, Demir A G, Caprio L, Tassa O and Previtali B 2020 Development of processing strategies for multigraded selective laser melting of Ti6Al4V and IN718 Powder Technol. 367 376–89

[64] Tey C F, Tan X P, Sing S L and Yeong W Y 2020 Additive manufacturing of multiple materials by selective laser melting: ti- alloy to stainless steel via a Cu-alloy interlayer Addit. Manuf. 31 100970

[65] Wei C, Gu H, Li Q, Sun Z, Chueh Y H, Liu Z and Li L 2020 Understanding of process and material behaviours in additive manufacturing of Invar36/Cu10Sn multiple material components via laser-based powder bed fusion Addit. Manuf. 31 101683

[66] Fayazfar H, Salarian M, Rogalsky A, Sarker D, Russo P, Paserin V and Toyserkani E 2018 A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties Mater. Des. 144 98–128

[67] Aboulkhair N T, Everitt N M, Ashcroft I and Tuck C 2014 Reducing porosity in AlSi10Mg parts processed by selective laser melting Addit. Manuf. 1 77–86

[68] Laakso P, Riipinen T, Laukkanen A, Andersson T, Jokinen A, Revuelta A and Ruusuvuori K 2016 Optimization and simulation of SLM process for high density H13 tool steel parts Phys. Procedia 83 26–35

[69] Pratt P, Felicelli S D, Wang L and Hubbard C R 2008 Residual stress measurement of laser-engineered net shaping AISI 410 thin plates using neutron diffraction Metall. Mater. Trans. A 39 3155–63

[70] Tiwari S K, Pande S, Agrawal S and Bobade S M 2015 Selection of selective laser sintering materials for different applications Rapid Prototyp. J. 21 630–48

[71] Sing S L, Wiria F E and Yeong W Y 2018 Selective laser melting of titanium alloy with 50 wt% tantalum: effect of laser process parameters on part quality Int. J. Refract. Met. Hard Mater. 77 120–7

[72] Zou S, Xiao H B, Ye F P, Li Z C, Tang W Z, Zhu F, Chen C T and Zhu C 2020 Numerical analysis of the effect of the scan strategy on the residual stress in the multi-laser selective laser melting Results Phys. 16 103005

[73] Yu W H, Sing S L, Chua C K and Tian X L 2019 Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting J. Alloys Compd. 792 574–81

[74] Aramian A, Sadeghian Z, Razavi S M J, Prashanth K G and Berto F 2020 Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr cermet Ceram. Int. 46 28749–57

[75] Yadroitsev I, Gusarov A, Yadroitsava I and Smurov I 2010 Single track formation in selective laser melting of metal powders J. Mater. Process. Technol. 210 1624–31

[76] Darvish K, Chen Z W, Phan M A L and Pasang T 2018 Selective laser melting of Co-29Cr-6Mo alloy with laser power 180–360 W: cellular growth, intercellular spacing and the related thermal condition Mater. Charact. 135 183–91

[77] Zhao C, Fezzaa K, Cunningham R W, Wen H D, De Carlo F, Chen L Y, Rollett A D and Sun T 2017 Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction Sci. Rep. 7 1–11

[78] Khorasani A M, Gibson I, Ghasemi A H and Ghaderi A 2020 Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4V Int. J. Mech. Sci. 168 105299

[79] Shrestha S, Starr T and Chou K A 2019 Study of keyhole porosity in selective laser melting: single-track scanning with micro-CT analysis J. Manuf. Sci. Eng. 141 1–11

[80] Bayat M, Thanki A, Mohanty S, Witvrouw A, Yang S F, Thorborg J, Tiedje N S and Hattel J H 2019 Keyhole-induced porosities in laser-based powder bed fusion (L-PBF) of Ti6Al4V: high-fidelity modelling and experimental validation Addit. Manuf. 30 100835

[81] Sing S L and Yeong W Y 2020 Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments Virtual Phys. Prototyp. 15 359–70

[82] Song B, Dong S J, Coddet P, Liao H L and Coddet C 2012 Fabrication and microstructure characterization of selective laser-melted FeAl intermetallic parts Surf. Coatings Technol. 206 4704–9

[83] Kuo C N, Chua C K, Peng P C, Chen Y W, Sing S L, Huang S and Su Y L 2020 Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy Virtual Phys. Prototyp. 15 120–9

[84] Seede R, Shoukr D, Zhang B, Whitt A, Gibbons S, Flater P, Elwany A, Arroyave R and Karaman I 2020 An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: densification, microstructure, and mechanical properties Acta Mater. 186 199–214

[85] Kruth J P, Froyen L, Van Vaerenbergh J, Mercelis P, Rombouts M and Lauwers B 2004 Selective laser melting of iron-based powder J. Mater. Process. Technol. 149 616–22

[86] Wan H Y, Zhou Z J, Li C P, Chen G F and Zhang G P 2018 Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting J. Mater. Sci. Technol. 34 1799–804

[87] Cheng B, Shrestha S and Chou K 2016 Stress and deformation evaluations of scanning strategy effect in selective laser melting Addit. Manuf. 12 240–51

[88] Lu Y J, Wu S Q, Gan Y L, Huang T T, Yang C G, Junjie L and Lin J X 2015 Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy Opt. Laser Technol. 75 197–206

[89] Azarniya A et al 2019 Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): process, microstructure, and mechanical properties J. Alloys Compd. 804 163–91

[90] Atwood C, Griffith M, Harwell L, Schlienger E, Ensz M, Smugeresky J, Romero T, Greene D and Reckaway D 1998 Laser engineered net shaping (LENSTM): a tool for direct fabrication of metal parts ICALEO 1 E1–7

[91] Thompson S M, Bian L K, Shamsaei N and Yadollahi A 2015 An overview of direct laser deposition for additive manufacturing; Part I: transport phenomena, modeling and diagnostics Addit. Manuf. 8 36–62

[92] Singh A, Kapil S and Das M 2020 A comprehensive review of the methods and mechanisms for powder feedstock handling in directed energy deposition Addit. Manuf. 35 101388

[93] Carroll B E, Otis R A, Borgonia J P, Suh J-O, Dillon R P, Shapiro A A, Hofmann D C, Liu Z-K and Beese A M 2016 Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling Acta Mater. 108 46–54

[94] Muller P, Mognol P and Hascoet J Y 2012 Functionally graded material (FGM) parts: from design to the manufacturing simulation Proc. of the ASME 2012 11th Biennial Conf. on Engineering Systems Design and Analysis Nantes, France: ASME

[95] Tammas-Williams S and Todd I 2017 Design for additive manufacturing with site-specific properties in metals and alloys Scr. Mater. 135 105–10

[96] Pan T, Zhang X C, Yamazaki T, Sutton A, Cui W Y, Li L and Liou F 2020 Characteristics of Inconel 625—copper bimetallic structure fabricated by directed energy deposition Int. J. Adv. Manuf. Technol. 109 1261–74

[97] Onuike B, Heer B and Bandyopadhyay A 2018 Additive manufacturing of Inconel 718—copper alloy bimetallic structure using laser engineered net shaping (LENSTM) Addit. Manuf. 21 133–40

[98] Zhang Y N and Bandyopadhyay A 2019 Direct fabrication of bimetallic Ti6Al4V + Al12Si structures via additive manufacturing Addit. Manuf. 29 100783

[99] Onuike B and Bandyopadhyay A 2020 Functional bimetallic joints of Ti6Al4V to SS410 Addit. Manuf. 31 100931

[100] Li W, Karnati S, Kriewall C, Liou F, Newkirk J, Brown Taminger K M and Seufzer W J 2017 Fabrication and characterization of a functionally graded material from Ti-6Al-4V to SS316 by laser metal deposition Addit. Manuf. 14 95–104

[101] Sahasrabudhe H, Harrison R, Carpenter C and Bandyopadhyay A 2015 Stainless steel to titanium bimetallic structure using LENSTM Addit. Manuf. 5 1–8

[102] Onuike B and Bandyopadhyay A 2018 Additive manufacturing of Inconel 718—Ti6Al4V bimetallic structures Addit. Manuf. 22 844–51

[103] Imran M K, Masood S H, Brandt M, Bhattacharya S and Mazumder J 2011 Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: evaluation of mechanical properties Mater. Sci. Eng. A 528 3342–9

[104] Schneider-Maunoury C, Weiss L, Perroud O, Joguet D, Boisselier D and Laheurte P 2019 An application of differential injection to fabricate functionally graded Ti-Nb alloys using DED-CLAD process J. Mater. Process. Technol. 268 171–80

[105] Angelastro A and Campanelli S L 2017 Direct laser metal deposition of WC/Co/Cr powder by means of the functionally graded materials strategy Surf. Topogr. Metrol. Prop. 5 044002

[106] Shah K, Ul Haq I, Khan A, Shah S A, Khan M and Pinkerton A J 2014 Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition Mater. Des. 54 531–8

[107] Shang C, Xu G J, Wang C Y, Yang G and You J H 2019 Laser deposition manufacturing of bimetallic structure from TA15 to inconel 718 via copper interlayer Mater. Lett. 252 342–4

[108] Pinkerton A J, Syed W U H and Li L 2007 Theoretical analysis of the coincident wire-powder laser deposition process J. Manuf. Sci. Eng. 129 1019–27

[109] Li L, Syed W U H and Pinkerton A J 2006 Rapid additive manufacturing of functionally graded structures using simultaneous wire and powder laser deposition Virtual Phys. Prototyp. 1 217–25

[110] Syed W U H, Pinkerton A J and Li L 2006 Simultaneous wire- and powder-feed direct metal deposition: an investigation of the process characteristics and comparison with single-feed methods J. Laser Appl. 18 65–72

[111] Syed W U H, Pinkerton A J and Li L 2006 Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping Appl. Surf. Sci. 252 4803–8

[112] Syed W U H, Pinkerton A J, Liu Z and Li L 2007 Single-step laser deposition of functionally graded coating by dual ‘wire–powder’ or ‘powder–powder’ feeding—a comparative study Appl. Surf. Sci. 253 7926–31

[113] Syed W U H, Pinkerton A J, Liu Z and Li L 2007 Coincident wire and powder deposition by laser to form compositionally graded material Surf. Coatings Technol. 201 7083–91

[114] Wong H, Dawson K, Ravi G A, Howlett L, Jones R O and Sutcliffe C J 2019 Multi-laser powder bed fusion benchmarking—initial trials with inconel 625 Int. J. Adv. Manuf. Technol. 105 2891–906

[115] Luo X C, Chang W L, Zhong W B and Wardle F 2018 Chapter 8—Hybrid machine tool design Hybrid Machining: Theory, Methods, and Case Studies, ed X C Luo and Y Qin (New York: Academic) pp 197–214

[116] Huckstepp A 2019 Surface roughness, digital alloys’ guide to metal additive manufacturing (available at: www.digitalalloys.com/blog/surface-roughness/)

[117] Mahamood R M, Akinlabi E T, Shukla M and Pityana S 2012 Functionally graded material: an overview Proc. of the World Congress on Engineering 2012 Vol III (London)

[118] Selcuk C 2011 Laser metal deposition for powder metallurgy parts Powder Metall. 54 94–99

[119] Bhavar V, Kattire P, Thakare S, Patil S and Singh R K P 2017 A review on functionally gradient materials (FGMs) and their applications IOP Conf. Ser.: Mater. Sci. Eng. 229 012021

[120] Popoola P, Farotade G, Fatoba O and Popoola O 2016 Laser engineering net shaping method in the area of development of functionally graded materials (FGMs) for aero engine applications—a review Fiber Laser, ed M Paul pp 383–99

[121] Lffelmann F and plíchal J 2018 Design study of the heat switch base plate with single and multi-material topology Proc. of the 13th Research and Education in Aircraft Design (Brno: Brno University of Technology) pp 1–12

[122] Mazumder J 2003 Designed materials by direct materials deposition ICALEO 704 PL704

[123] Hofmann D C, Roberts S, Otis R, Kolodziejska J, Dillon R P, Suh J-O, Shapiro A A, Liu Z-K and Borgonia J-P 2014 Developing gradient metal alloys through radial deposition additive manufacturing Sci. Rep. 4 5357

[124] Hinojos A, Mireles J, Reichardt A, Frigola P, Hosemann P, Murr L E and Wicker R B 2016 Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology Mater. Des. 94 17–27

[125] Locci I E, Bowman C L and Gabbs T P 2009 Development of high temperature dissimilar joint technology for fission surface power systems Proc. of the 4th Int. Brazing and Soldering Conf. (Orlando, FL, USA) pp 165–75

[126] Suzuki S, Akiba M, Araki M and Yokoyama K 1992 Thermal cycling experiments of monoblock divertor modules for fusion experimental reactors Fusion Technol. 21 1858–62

[127] Terrazas C A, Gaytan S M, Rodriguez E, Espalin D, Murr L E, Medina F and Wicker R B 2014 Multi-material metallic structure fabrication using electron beam melting Int. J. Adv. Manuf. Technol. 71 33–45

[128] Bohidar S K, Sharma R and Mishra P R 2014 Functionally graded materials: a critical review Int. J. Res. 1 289–301

[129] Durejko T, Zietala M, Polkowski W and Czujko T 2014 Thin wall tubes with Fe3Al/SS316L graded structure obtained by using laser engineered net shaping technology Mater. Des. 63 766–74

[130] Seidel C, Anstaett C, Horn M and Binder M 2018 Status quo der metallischen multimaterialverarbeitung mittels Laserstrahlschmelzen Fachtagung Werkstoffe Und Additive Fertigung Conf. (OGM)

[131] Chivel Y 2016 New approach to multi-material processing in selective laser melting Phys. Procedia 83 891–8

[132] Woidasky J 2017 Recyclingtechnik—fachbuch für lehre und praxis Chemie Ing. Tech. 89 346

[133] Ullrich H 1967 Mechanische Verfahrenstechnik: Berechnung Und Projektierung (Berlin: Springer)

[134] Hiller J D and Lipson H 2009 STL 2.0: a proposal for a universal multi-material additive manufacturing file format Proc. of Solid Freeform Fabrication Symp. (Austin, TX, USA) pp 266–78

[135] Reichardt A 2017 Additive Manufacturing of Metal-Based Functionally Graded Materials (Berkeley, CA: University of California)

[136] Müller A, Roslyakova I, Sprenger M, Git P, Rettig R, Markl M, Krner C and Singer R F 2019 MultOpt++: a fast regression-based model for the development of compositions with high robustness against scatter of element concentrations Model. Simul. Mater. Sci. Eng. 27 024001

[137] Reiser A et al 2020 Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties Adv. Funct. Mater. 30 1910491

[138] Hirt L, Reiser A, Spolenak R and Zambelli T 2017 Additive manufacturing of metal structures at the micrometer scale Adv. Mater. 29 1604211

[139] Fern′andez-Pradas J M, Sopea P, Gonz′alez-Torres S, Arrese J, Cirera A and Serra P 2018 Laser-induced forward transfer for printed electronics applications Appl. Phys. A 124 214

[140] Bohandy J, Kim B F and Adrian F J 1986 Metal deposition from a supported metal film using an excimer laser J. Appl. Phys. 60 1538–9

[141] Adrian F J, Bohandy J, Kim B F, Jette A N and Thompson P 1987 A study of the mechanism of metal deposition by the laser-induced forward transfer process J. Vac. Sci. Technol. 5 1490–4

[142] Willis D A and Grosu V 2005 Microdroplet deposition by laser-induced forward transfer Appl. Phys. Lett. 86 244103

[143] Serra P, Colina M, Fern′andez-Pradas J M, Sevilla L and Morenza J L 2004 Preparation of functional DNA microarrays through laser-induced forward transfer Appl. Phys. Lett. 85 1639–41

[144] Mathews S A, Charipar N A, Auyeung R C Y, Kim H and Piqu′e A 2015 Laser forward transfer of solder paste for microelectronics fabrication Proc. of SPIE 9351, Laser-Based Micro- and Nanoprocessing IX 93510Y (San Francisco, CA, USA: SPIE) (https://doi.org.10.1117/ 12.2080410)

[145] Auyeung R C Y, Kim H, Mathews S and Piqu′e A 2015 Laser forward transfer using structured light Opt. Express 23 422–30

[146] Mathews S A, Auyeung R C Y, Kim H, Charipar N A and Piqu′e A 2013 High-speed video study of laser-induced forward transfer of silver nano-suspensions J. Appl. Phys. 114 064910

[147] Piqu′e A, Auyeung R C Y, Metkus K M, Kim H, Mathews S, Bailey T, Chen X H and Young L J 2008 Laser decal transfer of electronic materials with thin film characteristics Proc. of SPIE 6879, Photon Processing in Microelectronics and Photonics VII 687911 (San Jose, CA, United States: SPIE) (https://doi.org.10.1117/ 12.779672)

[148] Zenou M and Kotler Z 2016 Printing of metallic 3D micro-objects by laser induced forward transfer Opt. Express 24 1431–46

[149] In’T Veld B H, Overmeyer L, Schmidt M, Wegener K, Malshe A and Bartolo P 2015 Micro additive manufacturing using ultra short laser pulses CIRP Ann. 64 701–24

[150] Esrom H, Zhang J-Y, Kogelschatz U and Pedraza A J 1995 New approach of a laser-induced forward transfer for deposition of patterned thin metal films Appl. Surf. Sci. 86 202–7

[151] Banks D, Kaur K, Grivas C and Fardel R 2009 Femtosecond laser-induced forward transfer for the deposition of nanoscale, transparent, and solid-phase materials Proc. of the 5th Int. Congress on Laser Advanced Materials Processing (Kobe, Japan) (available at: http://eprints.soton.ac.uk/79005/) pp 1–9

[152] Morales M, Munoz-Martin D, Marquez A, Lauzurica S and Molpeceres C 2018 Laser-induced forward transfer techniques and applications Advances in Laser Materials Processing: Technology, Research and Applications 2nd edn, ed J Lawrence (Amsterdam: Elsevier) p 802

[153] Feinaeugle M, Pohl R, Bor T, Vaneker T and Rmer G W 2018 Printing of complex free-standing microstructures via laser-induced forward transfer (LIFT) of pure metal thin films Addit. Manuf. 24 391–9

[154] Luo J, Pohl R, Qi L H, Rmer G-W, Sun C, Lohse D and Visser C W 2017 Printing functional 3D microdevices by laser-induced forward transfer Small 13 1602553

[155] Kim H, Sutto T E and Piqu′e A 2014 Laser materials processing for micropower source applications: a review J. Photonics Energy 4 040992

[156] Kim H, Sutto T E, Proell J, Kohler R, Pfleging W and Piqu′e A 2014 Laser-printed/structured thick-film electrodes for Li-ion microbatteries Proc. of SPIE 8968, Laser-Based Micro- Nanoprocessing VIII. 89680L (San Francisco, CA, United States: SPIE) (https://doi.org.10.1117/12.2037287)

[157] Kim H, Auyeung R C Y and Piqu′e A 2007 Laser-printed thick-film electrodes for solid-state rechargeable Li-ion microbatteries J. Power Sources 165 413–9

[158] Balducci A, Dugas R, Taberna P L, Simon P, Pl′ee D, Mastragostino M and Passerini S 2007 High temperature carbon–carbon supercapacitor using ionic liquid as electrolyte J. Power Sources 165 922–7

[159] Liu C G, Yu Z N, Neff D, Zhamu A and Jang B Z 2010 Graphene-based supercapacitor with an ultrahigh energy density Nano Lett. 10 4863–8

[160] Shen D Z, Zou G S, Liu L, Zhao W Z, Wu A P, Duley W W and Zhou Y N 2018 Scalable high-performance ultraminiature graphene micro-supercapacitors by a hybrid technique combining direct writing and controllable microdroplet transfer ACS Appl. Mater. Interfaces 10 5404–12

[161] Li G J, Mo X Y, Law W-C and Chan K C 2019 3D printed graphene/nickel electrodes for high areal capacitance electrochemical storage J. Mater. Chem. A 7 4055–62

[162] Everton S K, Hirsch M, Stravroulakis P, Leach R K and Clare A T 2016 Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing Mater. Des. 95 431–45

[163] Mazumder J 2015 Design for metallic additive manufacturing machine with capability for ‘certify as you build’ Procedia CIRP 36 187–92

[164] Scime L and Beuth J 2019 Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process Addit. Manuf. 25 151–65