[4] OJOVAN M I, LEE W E. An introduction to nuclear waste immobilisation[M]. Amsterdam: Elsevier, 2005.
[6] BIRKHOLZER J, HOUSEWORTH J, TSANG C F. Geologic disposal of high-level radioactive waste: status, key issues, and trends[J]. Annual Review of Environment and Resources, 2012, 37: 79-106.
[7] DONALD I W. Waste immobilization in glass and ceramic based hosts[M]. Hoboken: John Wiley & Sons, 2010.
[8] ROTH G, WEISENBURGER S. Vitrification of high-level liquid waste: glass chemistry, process chemistry and process technology[J]. Nuclear Engineering and Design, 2000, 202(2): 197-207.
[9] CAURANT D, LOISEAU P, MAJRUS O, et al. Glasses, glass-ceramics and ceramics for immobilization of highly radiocative nuclear wastes[M]. Hauppauge: Nova Science, 2007.
[12] RAJ K, PRASAD K K, BANSAL N K. Radioactive waste management practices in India[J]. Nuclear Engineering and Design, 2006, 236(7): 914-930.
[13] SUGILAL G, WATTAL P K, IYER K. Convective behaviour of a uniformly Joule-heated liquid pool in a rectangular cavity[J]. International Journal of Thermal Sciences, 2005, 44(10): 915-925.
[14] HRMA P, POKORNY R, LEE S, et al. Heat transfer from glass melt to cold cap: melting rate correlation equation[J]. International Journal of Applied Glass Science, 2019, 10(2): 143-150.
[15] MATSUNO S, ISO Y, UCHIDA H, et al. CFD modeling coupled with electric field analysis for joule-heated glass melters[J]. Journal of Power and Energy Systems, 2008, 2(1): 447-455.
[16] LI H L, XING Z B, XU S Q, et al. 3D simulation of borosilicate glass all-electric melting furnaces[J]. Journal of the American Ceramic Society, 2014, 97(1): 141-149.
[17] HAN J J, LI L Y, WANG J, et al. Simulation and evaluation of float glass furnace with different electrode positions[J]. Journal of the American Ceramic Society, 2022, 105(12): 7097-7110.
[18] LI L Y, HAN J J, LIN H J, et al. Simulation of glass furnace with increased production by increasing fuel supply and introducing electric boosting[J]. International Journal of Applied Glass Science, 2020, 11(1): 170-184.
[19] FERKL P, HRMA P, ABBOUD A, et al. Conversion kinetics during melting of simulated nuclear waste glass feeds measured by dissolution of silica[J]. Journal of Non-Crystalline Solids, 2022, 579: 121363.
[20] GUILLEN D P, CAMBARERI J, ABBOUD A W, et al. Numerical comparison of bubbling in a waste glass melter[J]. Annals of Nuclear Energy, 2018, 113: 380-392.
[21] ZHOU J, TAKAHASHI H, TSUZUKI N, et al. Investigation of flow behavior of joule-heating flow in a 2-D model of a reprocessing glass melter cavity[J]. Journal of Flow Control, Measurement & Visualization, 2018, 6(4): 199.
[22] SUNEEL G, SATYA SAI P M, KAUSHIK C P, et al. Experimental investigation and numerical modeling of a joule-heated ceramic melter for vitrification of radioactive waste[J]. Journal of Hazardous, Toxic, and Radioactive Waste, 2019, 23(1): 04018035.
[26] BALDRIDGE T, POLING G, FOROOZMEHR E, et al. Laser cladding of Inconel 690 on Inconel 600 superalloy for corrosion protection in nuclear applications[J]. Optics and Lasers in Engineering, 2013, 51(2): 180-184.
[27] GAN H, BUECHELE A C, KIM C W, et al. Corrosion of Inconel-690 electrodes in waste glass melts[J]. MRS Online Proceedings Library, 1999, 556(1): 287.
[28] WANG R F, GU H Z, BAI C, et al. Relationship between phase composition, thermal conductivity and corrosion resistance of fused-cast AZS refractories[J]. Interceram-International Ceramic Review, 2021, 70(3): 56-61.
[29] COCKCROFT S L, BRIMACORNBE J K, WALROD D G, et al. Thermal stress analysis of fused-cast AZS refractories during production: part II, development of thermo-elastic stress model[J]. Journal of the American Ceramic Society, 1994, 77(6): 1512-1521.
[31] POKORNY R, HRMA P. Mathematical modeling of cold cap[J]. Journal of Nuclear Materials, 2012, 429(1/2/3): 245-256.
