[1] HU X, HE P P, SHI C J. Carbonate binders: Historic developments and perspectives[J]. Cem Concr Res, 2024, 175: 107352.

[2] ASHRAF W, OLEK J. Elucidating the accelerated carbonation products of calcium silicates using multi-technique approach[J]. J CO2 Util, 2018, 23: 61–74.

[3] LU B, SHI C J, HOU G H. Strength and microstructure of CO2 cured low-calcium clinker[J]. Constr Build Mater, 2018, 188: 417–423.

[4] ASHRAF W, OLEK J. Carbonation behavior of hydraulic and non-hydraulic calcium silicates: Potential of utilizing low-lime calcium silicates in cement-based materials[J]. J Mater Sci, 2016, 51(13): 6173–6191.

[5] SHI C J, QU B, PROVIS J L. Recent progress in low-carbon binders[J]. Cem Concr Res, 2019, 122: 227–250.

[6] ASHRAF W, OLEK J, SAHU S. Phase evolution and strength development during carbonation of low-lime calcium silicate cement (CSC)[J]. Constr Build Mater, 2019, 210: 473–482.

[7] ASHRAF W, OLEK J, JAIN J. Microscopic features of non-hydraulic calcium silicate cement paste and mortar[J]. Cem Concr Res, 2017, 100: 361–372.

[8] IBEZ J, ARTS L, CUSC R, et al. Hydration and carbonation of monoclinic C2S and C3S studied by Raman spectroscopy[J]. J Raman Spectrosc, 2007, 38(1): 61–67.

[9] BUKOWSKI J M, BERGER R L. Reactivity and strength development of CO2 activated non-hydraulic calcium silicates[J]. Cem Concr Res, 1979, 9(1): 57–68.

[10] GUAN X M, LIU S H, FENG C H, et al. The hardening behavior of -C2S binder using accelerated carbonation[J]. Constr Build Mater, 2016, 114: 204–207.

[12] CHANG J, FANG Y F, SHANG X P. The role of -C2S and -C2S in carbon capture and strength development[J]. Mater Struct, 2016, 49(10): 4417–4424.

[13] ZHANG H W, CHEN J N, SHAO R, et al. The usage of rankinite for carbon capture and storage and carbonation kinetics[J]. Energy Sources Part A Recovery Util Environ Eff, 2018, 40(13): 1629–1646.

[14] HOU G, CHEN J, LU B, et al. Composition design and pilot study of an advanced energy-saving and low-carbon rankinite clinker[J]. Cem Concr Res, 2020, 127: 105926.

[16] MU Y D, LIU Z C, WANG F Z. Comparative study on the carbonation-activated calcium silicates as sustainable binders: Reactivity, mechanical performance, and microstructure[J]. ACS Sustain Chem Eng, 2019, 7(7): 7058–7070.

[17] HE P P, SHI C J, TU Z J, et al. Effect of further water curing on compressive strength and microstructure of CO2-cured concrete[J]. Cem Concr Compos, 2016, 72: 80–88.

[18] HE P P, DRISSI S, HU X, et al. Investigation on the influential mechanism of FA and GGBS on the properties of CO2-cured cement paste[J]. Cem Concr Compos, 2023, 142: 105186.

[19] STEINOUR H H. Some effects of carbon dioxide on mortars and concrete-A discussion[J]. J Am Concr Instit, 1959, 55(2): 905–907.

[20] WU F S, YOU X J, WANG M M, et al. Increasing flexural strength of CO2 cured cement paste by CaCO3 polymorph control[J]. Cem Concr Compos, 2023, 141: 105128.

[21] LU B, HE P P, LIU J H, et al. Microstructure of Portland cement paste subjected to different CO2 concentrations and further water curing[J]. J CO2 Util, 2021, 53: 101714.

[22] SHEN P L, ZHANG Y Y, JIANG Y, et al. Phase assemblance evolution during wet carbonation of recycled concrete fines[J]. Cem Concr Res, 2022, 154: 106733.

[23] CHANG J, FANG Y F. Quantitative analysis of accelerated carbonation products of the synthetic calcium silicate hydrate(C-S-H) by QXRD and TG/MS[J]. J Therm Anal Calorim, 2015, 119(1): 57–62.

[24] JIANG T, CUI K, CHANG J. Development of low-carbon cement: Carbonation of compounded C2S by -C2S and -C2S[J]. Cem Concr Compos, 2023, 139: 105071.

[25] ASHRAF W, OLEK J. Carbonation activated binders from pure calcium silicates: Reaction kinetics and performance controlling factors[J]. Cem Concr Compos, 2018, 93: 85–98.

[26] CHANG J, JIANG T, CUI K. Influence on compressive strength and CO2 capture after accelerated carbonation of combination -C2S with -C2S[J]. Constr Build Mater, 2021, 312: 125359.

[27] KERISIT S, BYLASKA E J, FELMY A R. Water and carbon dioxide adsorption at olivine surfaces[J]. Chem Geol, 2013, 359: 81–89.

[28] XUAN D X, ZHAN B J, POON C S. A maturity approach to estimate compressive strength development of CO2-cured concrete blocks[J]. Cem Concr Compos, 2018, 85: 153–160.

[29] ZHAO S X, LIU Z C, WANG F Z, et al. Effect of extended carbonation curing on the properties of -C2S compacts and its implications on the multi-step reaction mechanism[J]. ACS Sustain Chem Eng, 2021, 9(19): 6673–6684.

[30] ZAJAC M, IRBE L, BULLERJAHN F, et al. Mechanisms of carbonation hydration hardening in Portland cements[J]. Cem Concr Res, 2022, 152: 106687.

[32] LYU H X, HAO L C, LI L, et al. The development of sustainable cement pastes enhanced by the synergistic effects of glass powder and carbonation curing[J]. J Clean Prod, 2023, 418: 138237.

[33] OGINO T, SUZUKI T, SAWADA K. The formation and transformation mechanism of calcium carbonate in water[J]. Geochim Cosmochim Acta, 1987, 51(10): 2757–2767.

[34] BOTS P, BENNING L G, RODRIGUEZ-BLANCO J D, et al. Mechanistic insights into the crystallization of amorphous calcium carbonate (ACC)[J]. Cryst Growth Des, 2012, 12(7): 3806–3814.

[37] LI L, LIU Q, DAO V, et al. Dimensional change of cement paste subjected to carbonation in CO2 sequestration and utilization context: A critical review on the mechanisms[J]. J CO2 Util, 2023, 70: 102444.

[38] HAY R, LI J Q, CELIK K. Phase evolution, micromechanical properties, and morphology of calcium (alumino)silicate hydrates C-(A-)S-H under carbonation[J]. Cem Concr Res, 2022, 152: 106683.

[39] FUKUDA K, ITO S. Improvement in reactivity and grindability of belite-rich cement by remelting reaction[J]. J Am Ceram Soc, 1999, 82(8): 2177–2180.

[40] KELLERMEIER M, MELERO-GARCA E, GLAAB F, et al. Stabilization of amorphous calcium carbonate in inorganic silica-rich environments[J]. J Am Chem Soc, 2010, 132(50): 17859–17866.

[41] QIN L, GAO X J, LI Q Y. Upcycling carbon dioxide to improve mechanical strength of Portland cement[J]. J Clean Prod, 2018, 196: 726–738.

[42] ZHANG X D, LI H X, HOU F L, et al. Synthesis of highly efficient Mn2O3 catalysts for CO oxidation derived from Mn-MIL-100[J]. Appl Surf Sci, 2017, 411: 27–33.