[1] D. Xu, X. Cheng, S. Huang, M. Jiang. Electromechanical properties of 2–2 cement based piezoelectric composite. Curr. Appl. Phys., 9, 816(2009).
[2] V. Y. Topolov, A. V. Krivoruchko, C. R. Bowen, A. A. Panich. Hydrostatic piezoelectric coefficients of the 2–2 composite based on 011.-poled 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 single crystal. Ferroelectrics, 400, 410(2010).
[3] J. M. Cannata, J. A. Williams, L. Zhang, C.-H. Hu, K. K. Shung. A high-frequency linear ultrasonic array utilizing an interdigitally bonded 2–2 piezo-composite. IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 58, 2202(2011).
[4] R. Han, Z. Shi, Y. L. Mo. Static analysis of 2–2 cement-based piezoelectric composites. Arch. Appl. Mech., 81, 839(2011).
[5] W. A. Smith. Modeling 1–3 composite piezoelectrics: Hydrostatic response. IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 40, 41(1993).
[6] A. T. Doan, T. Yokoyama, T. D. Dao, S. Ishii, A. Ohi, T. Nabatame, Y. Wada, S. Maruyama, T. Nagao. A MEMS-based quad-wavelength hybrid plasmonic-pyroelectric infrared detector. Micromachines, 10, 5(2019).
[7] Z. Zhang, J. L. Xu, L. L. Yang, S. X. Liu, J. J. Xiao, X. B. Li, X. A. Wang, H. S. Luo. Design and comparison of PMN-PT single crystals and PZT ceramics based medical phased array ultrasonic transducer. Sens. Actuators A, Phys., 283, 273(2018).
[8] D. Zhou, K. F. Cheung, Y. Chen, S. T. Lau, Q. Zhou, K. K. Shung, H. S. Luo, J. Dai, H. L. W. Chan. Fabrication and performance of endoscopic ultrasound radial arrays based on PMN-PT single crystal/epoxy 1–3 composite. IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 58, 477(2011).
[9] W. Wang, S. W. Or, Q. Yue, Y. Zhang, J. Jiao, B. Ren, D. Lin, C. M. Leung, X. Zhao, H. Luo. Cylindrically shaped ultrasonic linear array fabricated using PIMNT/epoxy 1–3 piezoelectric composite. Sens. Actuators A, Phys., 192, 69(2013).
[10] W. Zhou, T. Zhang, J. Ou-Yang, X. Yang, D. Wu, B. Zhu. PIN-PMN-PT single crystal 1–3 composite-based 20 MHz ultrasound phased array. Micromachines, 11, 3(2020).
[11] X. Y. Gao, C. R. Qiu, G. Li, M. Ma, S. Yang, Z. Xu, F. Li. High output power density of a shear-mode piezoelectric energy harvester based on Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals. Appl. Energy, 271, 5(2020).
[12] K. Song, Q. Li, H. Guo, Q. Hu, Z. Li, F. Li, S. Fan, Z. Xu. Composition and electrical properties characterization of a 5′′ diameter PIN-PMN-PT single crystal by the modified Bridgman method. J. Alloys Compd., 851, 3(2021).
[13] S. Hou, X. Y. Yang, C. L. Fei, X. H. Sun, Q. Chen, P. F. Lin, D. Li, Y. T. Yang, Q. F. Zhou. Fabrication of PMN-PT/Epoxy 2–2 composite ultrasonic transducers and analysis based on equivalent circuit model. J. Electron. Mater., 47, 6842(2018).
[14] S. Zhang, F. Li. High performance ferroelectric relaxor-PbTiO3 single crystals: Status and perspective. J. Appl. Phys., 111, 5(2012).
[15] S. Zhang, F. Li, X. Jiang, J. Kim, J. Luo, X. Geng. Advantages and challenges of relaxor-PbTiO3 ferroelectric crystals for electroacoustic transducers — A review. Prog. Mater. Sci., 68, 1(2015).
[16] W. Li, P. Li, H. R. Zeng, J. G. Hao, J. W. Zhai. Enhanced dielectric and piezoelectric properties in lead-free Bi0.5Na0.5TiO3-BaTiO3-SrTiO3 thin films with seed layer. Ceram. Int., 41, S356(2015).
[17] Q. Yue, D. Liu, J. Deng, X. Zhao, D. Lin, W. Di, X. Li, W. Wang, X. A. Wang, H. Luo. Design and fabrication of relaxor-ferroelectric single crystal PIN-PMN-PT/epoxy 2–2 composite based array transducer. Sens. Actuators A, Phys., 234, 34(2015).
[18] H. Jia, H. Li, B. Lin, Y. Hu, L. Peng, D. Xu, X. Cheng. Fine scale 2–2 connectivity PZT/epoxy piezoelectric fiber composite for high frequency ultrasonic application. Sens. Actuators A, Phys., 324, 6(2021).
[19] Y. Chen, K. H. Lam, D. Zhou, Q. W. Yue, Y. X. Yu, J. C. Wu, W. B. Qiu, L. Sun, C. Zhang, H. S. Luo, H. L. W. Chan, J. Y. Dai. High performance relaxor-based ferroelectric single crystals for ultrasonic transducer applications. Sensors, 14, 13730(2014).
[20] Y. Wang, X. Lin, J. Li, S. Huang, X. Cheng. Effect of structural parameters and stability of constituent materials on the performance of 1–3 spherical crown piezocomposite and transducer. Sens. Actuators A, Phys., 278, 18(2018).
[21] V. Y. Topolov, A. N. Isaeva, C. R. Bowen, B. O. Protsenko. Piezoelectric properties and related parameters of novel 1–2–2 composites based on single crystals of the PZN-xPT type. Ferroelectrics, 591, 178(2022).
[22] F. Li, M. J. Cabral, B. Xu, Z. Cheng, E. C. Dickey, J. M. LeBeau, J. Wang, J. Luo, S. Taylor, W. Hackenberger, L. Bellaiche, Z. Xu, L.-Q. Chen, T. R. Shrout, S. Zhang. Giant piezoelectricity of Sm-doped Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals. Science, 364, 264(2019).
[23] J. Khaliq, D. B. Deutz, J. A. C. Frescas, P. Vollenberg, T. Hoeks, S. van der Zwaag, P. Groen. Effect of the piezoelectric ceramic filler dielectric constant on the piezoelectric properties of PZT-epoxy composites. Ceram. Int., 43, 2774(2017).
[24] S. L. Yi, W. K. Zhang, G. P. Gao, H. C. Xu, D. Y. Xu. Structural design and properties of fine scale 2–2–2 PZT/epoxy piezoelectric composites for high frequency application. Ceram. Int., 44, 10940(2018).
[25] Y. Zhang, S. Wang, D. A. Liu, Q. Zhang, W. Wang, B. Ren, X. Zhao, H. Luo. Fabrication of angle beam two-element ultrasonic transducers with PMN-PT single crystal and PMN-PT/epoxy 1–3 composite for NDE applications. Sens. Actuators A, Phys., 168, 223(2011).
[26] J. Zhao, R. F. Zhu, Q. X. Du, F. Liu, Y. Wu, D. Lin, H. Q. Xu, W. N. Di, J. W. Chen, H. S. Luo. Surface and thickness effect on the ferroelectric, dielectric and pyroelectric properties of Mn-doped Pb(Mg1/3Nb2/3)O3-0.28PbTiO3 single crystals. J. Alloys Compd., 816, 5(2020).
[27] D. Xu, C. Xin, S. Banerjee, W. Lei, S. Huang. Dielectric, piezoelectric and damping properties of novel 2–2 piezoelectric composites. Smart Mater. Struct., 24, 4(2015).
